Journal of Materials Science

Professor Cyril A Hogarth
pp. 2537-2537(1)
Authors: Carter, C. Barry; Rawlings, Rees

Comments on the phenomena underlying pressure stimulated currents in dielectric rock materials
pp. 2538-2542(5)
Authors: Anastasiadis, C.; Triantis, D.; Hogarth, C.

Structural and electrical properties of SiO₂-Li₂O-Nb₂O₅ glass and glass-ceramics obtained by thermoelectric treatments
pp. 2543-2550(8)
Authors: Graça, M.; Ferreira da Silva, M.; Valente, M.

Synthesis, crystallographic characterization and ionic conductivity of iron substituted sodium zirconium phosphate Na_1.2Zr_1.8Fe_0.2(PO₄)₃
pp. 2551-2556(6)
Authors: Shrivastava, O.; Kumar, Narendra; Chourasia, Rashmi

Density gradients in aluminium foams: characterisation by computed tomography and measurements of the effective thermal conductivity
pp. 2557-2564(8)
Authors: Solórzano, E.; Rodríguez-Pérez, M.; Reglero, J.; Saja, J.

Artificial neural network prediction of heat-treatment hardness and abrasive wear resistance of High-Vanadium High-Speed Steel (HVHSS)
pp. 2565-2573(9)
Authors: Liujie, Xu; Jiandong, Xing; Shizhong, Wei; Tao, Peng; Yongzhen, Zhang; Rui, Long

Correlation between interfacial microstructure and shear behavior of Sn-Ag-Cu solder ball joined with Sn-Zn-Bi paste
pp. 2574-2581(8)
Authors: Shih, Po-Cheng; Lin, Kwang-Lung

High pressure Raman spectroscopic study of structural phase transition in samarium oxide
pp. 2582-2585(4)
Authors: Hongo, Teruhisa; Kondo, Ken-ichi; Nakamura, Kazutaka; Atou, Toshiyuki

Preparation, microstructure and electrorheological property of nano-sized TiO₂ particle materials doped with metal oxides
pp. 2586-2590(5)
Authors: Shang, Yan-Li; Jia, Yun-Ling; Liao, Fu-Hui; Li, Jun-Ran; Li, Ming-Xiu; Wang, Juan; Zhang, Shao-Hua

The study of tri-phasic interactions in nano-hydroxyapatite/konjac glucomannan/chitosan composite
pp. 2591-2597(7)
Authors: Gang, Zhou; Yubao, Li; Li, Zhang; Hong, Li; Mingbo, Wang; Lin, Cheng; Yuanyuan, Wang; Huanan, Wang; Pujiang, Shi

On the origin of blue-green luminescence in spray pyrolysed ZnO thin films
pp. 2598-2602(5)
Authors: Ratheesh Kumar, P.; Vijayakumar, K.; Sudha Kartha, C.

Characteristics of nanostructure and electrical properties of Ti thin films as a function of substrate temperature and film thickness
pp. 2603-2611(9)
Authors: Savaloni, H.; Khojier, K.; Alaee, M.

Preparation and phase formation of perovskite Pb(Ni_1/3Nb_2/3)O₃ by a reaction-sintering process
pp. 2612-2617(6)
Authors: Liou, Yi-Cheng; Huang, Yi-Chen; Wu, Chi-Ting

Positron lifetime studies and coincidence Doppler broadening spectroscopy of Al-6Mg-xSc (x = 0 to 0.6 wt.%) alloy
pp. 2618-2629(12)
Authors: Kaiser, M.; Nambissan, P.; Banerjee, M.; Sachdeva, A.; Pujari, P.

Serrated flow in cast ZE43 alloy
pp. 2630-2632(3)
Authors: Wang, C.; Zhang, X.; Cao, N.; Liu, Z.

Electromagnetic interfering shielding of aluminum alloy-cenospheres composite
pp. 2633-2636(4)
Authors: Wu, Gaohui; Huang, Xiaoli; Dou, Zuoyong; Chen, Su; Jiang, Longtao

Microstructure and electrical properties of ZnO-based varistors prepared by high-energy ball milling
pp. 2637-2642(6)
Authors: Liu, Hong-Yu; Kong, Hui; Ma, Xue-Ming; Shi, Wang-Zhou

Chemical interaction between Crofer 22 APU and mica-based gaskets under simulated SOFC conditions
pp. 2643-2651(9)
Authors: Wiener, F.; Bram, M.; Buchkremer, H.-P.; Sebold, D.

Temperature and weldline effects on tensile properties of injection moulded short glass fibre PC/ABS polymer composite
pp. 2652-2661(10)
Authors: Hashemi, S.; Lepessova, Y.

Microstructural study of carbonized wood after cell wall sectioning
pp. 2662-2668(7)
Authors: Ishimaru, Kengo; Hata, Toshimitsu; Bronsveld, Paul; Imamura, Yuji

Preparation of metal alloy powder by semi-solid processing
pp. 2669-2674(6)
Authors: Li, Tao; Lin, Xin; Huang, Weidong

Effect of transition metal (TM) on the crystallization and the magnetic properties of Fe₆₂Co₁₀Si₁₀B₁₃Nb₄TM₁ melt-spun ribbons
pp. 2675-2677(3)
Author: Kim, Hyang-Yeon

Effect of the oxygen pressure on the photoluminescence properties of ZnO thin films by PLD
pp. 2678-2683(6)
Authors: Fan, X.; Lian, J.; Jiang, Qing; Zhou, ZuoWan

Preparation and characterization of l-cystine and l-cysteine intercalated layered double hydroxides
pp. 2684-2689(6)
Authors: Wei, Min; Guo, Jian; Shi, Zhiyu; Yuan, Qi; Pu, Min; Rao, Guoying; Duan, Xue

Investigations on the thermal and flexural properties of plain weave carbon/epoxy-nanoclay composites by hand-layup technique
pp. 2690-2700(11)
Authors: Chowdhury, F.; Hosur, M.; Jeelani, S.

Thermodynamically modeling the interactions of hydrogen, stress and anodic dissolution at crack-tip during near-neutral pH SCC in pipelines
pp. 2701-2705(5)
Author: Cheng, Y.

Al₂O₃-platelet reinforced glass matrix composites from a mixture of wastes
pp. 2706-2711(6)
Authors: Bernardo, E.; Castellan, R.; Hreglich, S.

Study of defect states in a-Se₈₅Te_15−x Pb _x thin films by space charge limited conduction mechanism
pp. 2712-2716(5)
Authors: Kushwaha, V.; Kumar, A.

Electrode coatings for high temperature hydrogen electrolysis
pp. 2717-2723(7)
Authors: Windes, W.; Smith, C.; Wendt, D.; Erickson, A.; Walraven, J.; Lessing, P.

Kinetics, mechanism and modelling of microstructural evolution during thermomechanical processing of a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel
pp. 2724-2734(11)
Authors: Mandal, Sumantra; Sivaprasad, P.; Dube, R.

Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB₂-SiC
pp. 2735-2744(10)
Authors: Rezaie, Alireza; Fahrenholtz, William G.; Hilmas, Gregory E.

Interfacial mechanical properties of TiN coating on steels by indentation
pp. 2745-2752(8)
Authors: Chiou, Shi-Yung; Gan, Dershin

Fabrication and optical property of single-crystalline InSb nanowire arrays
pp. 2753-2757(5)
Authors: Yang, Youwen; Li, Liang; Huang, Xiaohu; Li, Guanghai; Zhang, Lide

Preparation and characterization of metalorganic chemical vapor deposited nickel oxide and lithium nickel oxide thin films
pp. 2758-2765(8)
Authors: Eleruja, M.; Egharevba, G.; Abulude, O.; Akinwunmi, O.; Jeynes, C.; Ajayi, E.

Fracture behaviours of epoxy nanocomposites with nano-silica at low and elevated temperatures
pp. 2766-2774(9)
Authors: Deng, Shiqiang; Ye, Lin; Friedrich, Klaus

Preparation and characterization of hydrophobically modified polyacrylamide hydrogels by grafting glycidyl methacrylate
pp. 2775-2781(7)
Authors: Song, Ping'an; Zhang, Yafeng; Kuang, Jianzheng

The role of poly(ethylene terephthalate-co-isophthalate) as interfacial agent in polypropylene-matrix composites
pp. 2782-2791(10)
Authors: Arencón, D.; Velasco, J.; Ardanuy, M.; Martínez, A.

Synthesis and optical properties of naturally occurring fluorescent mineral, ferroan sphalerite, inspired (Fe,Zn)S nanoparticles
pp. 2792-2795(4)
Authors: Boyle, Timothy J.; Pratt, Harry D.; Hernandez-Sanchez, Bernadette A.; Lambert, Timothy N.; Headley, Thomas J.

Influence of coating on short steel fiber reinforcements on corrosion behavior of aluminium base short steel fiber reinforced composites
pp. 2796-2801(6)
Authors: Mandal, D.; Dutta, B. K.; Panigrahi, S. C.

Compressive strength of ice at impact strain rates
pp. 2802-2806(5)
Authors: Kim, Hyonny; Keune, John

Compressive creep behavior in air of a slightly porous as-sintered polycrystalline α-alumina material
pp. 2807-2819(13)
Authors: Bernard-Granger, Guillaume; Guizard, Christian; Duclos, Richard

Fracture behavior of notched specimens of TiAl alloys
pp. 2820-2829(10)
Authors: Chen, J.; Cao, R.; Zhang, J.; Wang, G.

Kinetics of the γ → α-alumina phase transformation by quantitative X-ray diffraction
pp. 2830-2836(7)
Authors: Macêdo, Maria; Bertran, Celso; Osawa, Carla

Silylation of layered zirconium hydroxy phosphate and its porous properties
pp. 2837-2843(7)
Authors: Takei, Takahiro; Yonesaki, Yoshinori; Kumada, Nobuhiro; Kinomura, Nobukazu

Ball milling of stainless steel scrap chips to produce nanocrystalline powder
pp. 2844-2848(5)
Authors: Enayati, M.; Bafandeh, M.; Nosohian, S.

Effects of nanocrystalline ferrite particles on densification and magnetic properties of the NiCuZn ferrites
pp. 2849-2853(5)
Authors: Su, Hua; Zhang, Huaiwu; Tang, Xiaoli; Liu, Yingli

Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and Foaming
pp. 2854-2861(8)
Authors: Wang, Chunmin; Wang, Jin; Park, Chul; Kim, Young-Wook

Analysis of observations on solid-solution hardening in KBr-KCl single crystals
pp. 2862-2866(5)
Authors: Asif, Ali; Butt, Muhammad

On the hydrolytic stability of polyester yarns
pp. 2867-2878(12)
Authors: Burgoyne, C.; Merii, A.

Short-term corrosion behavior of galvanized coatings in natural waters of the Greek territory
pp. 2879-2885(7)
Authors: Pistofidis, N.; Vourlias, G.; Stergioudis, G.

Synthesis of CaTiO₃: Pr, Al phosphors by sol-gel method and their luminescence properties
pp. 2886-2890(5)
Authors: Yin, Shengyu; Chen, Donghua; Tang, Wanjun; Yuan, Yuhong

Accelerated aging study of ultra high molecular weight polyethylene yarn and unidirectional composites for ballistic applications
pp. 2891-2893(3)
Authors: Chabba, S.; Es, M.; Klinken, E.; Jongedijk, M.; Vanek, D.; Gijsman, P.; Waals, A.

Nanomechanical properties of the stigma of dragonfly Anax parthenope julius Brauer
pp. 2894-2898(5)
Authors: Tong, Jin; Zhao, Yanru; Sun, Jiyu; Chen, Donghui

On the intergranular embrittlement of a solid-solution strengthened Fe-base alloy by internal oxidation
pp. 2899-2902(4)
Author: Tawancy, H.

Conductive behavior of composites composed of carbon black-filled ethylene-tetrafluoroethylene copolymer
pp. 2903-2906(4)
Authors: Liu, Zhihua; Song, Yihu; Shangguan, Yonggang; Zheng, Qiang

A method for calculating order parameter and determining orientation direction on polarized molecules in organic-inorganic hybrid film
pp. 2907-2912(6)
Authors: Yamashita, Masaru; Kuraoka, Koji

High mobility organic transistor patterned by the shadow-mask with all structure on a plastic substrate
pp. 2913-2913(1)
Authors: Lee, Joo-Won; Ju, Byeong-Kwon; Jang, Jin; Yoon, Young-Soo; Kim, Jai-Kyeong