Journal of Materials Science

Calcium orthophosphates
pp. 1061-1095(35)
Author: Dorozhkin, Sergey

Tensile strength degradation of ceramic fibres due to cyclic loading
pp. 1096-1107(12)
Author: Kaya, F.

A method for characterizing the mechanical behaviour of hoof horn
pp. 1108-1115(8)
Authors: Zhang, Dongsheng; Arola, Dwayne; Reprogel, Robert; Zheng, Wei; Tasch, Uri; Dyer, Robert

Potential of short Si-Ti-C-O fiber-reinforced epoxy matrix composite as electromagnetic wave absorbing material
pp. 1116-1121(6)
Authors: Kagawa, Y.; Matsumura, K.; Iba, H.; Imahashi, Y.

Diffusion relaxation of solitons in finite Frenkel-Kontorova systems
pp. 1122-1126(5)
Authors: Mikheikin, I.; Sakun, V.; Kuznetsov, M.; Makhonina, E.; Pervov, V.

Effect of gamma irradiation on the optical properties of CR-39 polymer
pp. 1127-1130(4)
Authors: Sharma, Tanu; Aggarwal, Sanjeev; Kumar, Shyam; Mittal, V.; Kalsi, P.; Manchanda, V.

On the application of the “rule of mixture” to microhardness of complex polymer systems containing a soft component and/or phase
pp. 1131-1148(18)
Author: Fakirov, S.

Preparation of barium strontium titanate using a modified polymeric precursor method
pp. 1149-1155(7)
Authors: Venkata Saravanan, K.; James Raju, K.; Ghanashyam Krishna, M.; Bhatnagar, Anil

Mechanical and thermal properties of poly(arylene disulfide) derived from cyclic(4,4′-oxybis(benzene)disulfide) via ring-opening polymerization
pp. 1156-1161(6)
Authors: Song, L.; Xiao, M.; Shu, D.; Wang, S.; Meng, Y.

Effects of fiber orientation on the acoustic emission and fracture characteristics of composite laminates
pp. 1162-1168(7)
Authors: Choi, Nak-Sam; Woo, Sung-Choong; Rhee, Kyong-Yop

Hydrogen accumulation in graphite and etching of graphite on hydrogen desorption
pp. 1169-1176(8)
Author: Waqar, Z.

A numerical study of the effect of heterogeneities in composition on micropyretic synthesis
pp. 1177-1183(7)
Author: Li, H.

Thermal study on structural changes and phase transition in high-energy electron-irradiated blends of P(VDF-TrFE) copolymers
pp. 1184-1189(6)
Authors: Guo, S.; Sun, C.; Wu, T.; Zhao, X.; Chan, Helen

Manganese pigmented anodized copper as solar selective absorber
pp. 1190-1195(6)
Authors: Arurault, L.; Belghith, M.; Bes, R.

Optical and electrical properties of obliquely deposited a-GeSe₂ films
pp. 1196-1201(6)
Authors: Bhardwaj, Priyamvada; Shishodia, P.; Mehra, R.

Thermal stresses and related phenomena in composite ceramics
pp. 1202-1227(26)
Author: Ceniga, Ladislav

Synthesis of pure tetragonal zirconium oxide with high surface area
pp. 1228-1237(10)
Authors: Rezaei, M.; Alavi, S.; Sahebdelfar, S.; Yan, Zi-Feng; Teunissen, H.; Jacobsen, J.; Sehested, J.

Effects of introducing silica particles on the rheological properties and crystallization behavior of poly(ethylene terephthalate)
pp. 1238-1244(7)
Authors: Chae, Dong; Kim, Byoung

Effect of composition on transcrystallization with reorientation of polypropylene in drawn PET/PP blend
pp. 1245-1250(6)
Authors: Apostolov, A.; Evstatiev, M.; Denchev, Z.; Friedrich, K.; Fakirov, S.

The relationship between fracture toughness and microstructure of fully lamellar TiAl alloy
pp. 1251-1260(10)
Authors: Zheng, R.; Cheng, G.; Li, X.; CAO, G.; Fu, L.; Zhang, Y.; Chen, C.

Elastic properties of powders during compaction. Part 1: Pseudo-isotropic moduli
pp. 1261-1268(8)
Authors: Hentschel, M.; Page, N.

Elastic properties of powders during compaction. Part 2: elastic anisotropy
pp. 1269-1278(10)
Authors: Hentschel, M.; Page, N.

Evaluation of EB-PVD deposited Ni-Cr-Al alloy foil
pp. 1279-1284(6)
Authors: Guan, Chunlong; Liu, Guoqin; He, Xiaodong; Shan, Yingchun

Composite formation of Thiol-capped Au nanoparticles and mesoporous silica prepared by a sol-gel method
pp. 1285-1292(8)
Authors: Tai, Y.; Watanabe, M.; Murakami, J.; Tajiri, K.

Preparation of polyaniline coated activated carbon and their electrode performance for supercapacitor
pp. 1293-1298(6)
Authors: Tamai, H.; Hakoda, M.; Shiono, T.; Yasuda, H.

Effect of an electric field applied during the solution heat treatment of the Al-Mg-Si alloy AA6022 on the subsequent natural aging kinetics
pp. 1299-1303(5)
Authors: Conrad, Hans; Jung, Kang

Electrodeposited heterojunctions based on cadmium chalcogenide, CdX (X = S, Se, Te) and polyaniline
pp. 1304-1308(5)
Authors: Joshi, S.; Lokhande, C.

Factors affecting prior austenite grain size in low alloy steel
pp. 1309-1320(12)
Authors: Maropoulos, S.; Karagiannis, S.; Ridley, N.

Properties of GaAs films deposited by pulse periodic technique
pp. 1321-1324(4)
Author: Murali, K.

Synthesis and light-emitting properties of poly[9-(4′-tert-butyl-phenylenemethene)-fluoroene-co-9,9-dioctylfluorene]
pp. 1325-1329(5)
Authors: Yu, Zongqiang; Tan, Songting; Yuan, Zhuling; Zou, Yingping; Fan, Benhu; Li, Yongfang

Influence of pre-irradiation atmosphere on the properties of polymer electrolyte membranes prepared using radiation grafting method
pp. 1330-1335(6)
Authors: Septiani, Upita; Chen, Jinhua; Asano, Masaharu; Maekawa, Yasunari; Yoshida, Masaru; Kubota, Hitoshi

Negative Poisson's ratio structures produced from zirconia and nickel using co-extrusion
pp. 1336-1342(7)
Authors: Crumm, Aaron; Halloran, John

Preparation and characterization of three-dimensional braided carbon/Kevlar/epoxy hybrid composites
pp. 1343-1350(8)
Authors: Wan, Y.; Lian, J.; Huang, Y.; He, F.; Wang, Y.; Jiang, H.; Xin, J.

Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer
pp. 1351-1359(9)
Authors: Lüftl, S.; Archodoulaki, V.; Glantschnig, M.; Seidler, S.

Mechanical improvement of hydroxyapatite by TiO _x nanoparticles deposition
pp. 1360-1368(9)
Authors: Díaz-Estrada, J.; Camps, E.; Escobar-Alarcón, L.; Ascencio, J.

Efficient and stable field emission from the oxidized porous polysilicon using Pt/Ti multilayer electrode
pp. 1369-1375(7)
Authors: Bae, Seong-Chan; Choi, Sie-Young

Surface synthesis of PbS nanoparticles on silica spheres by a sonochemical approach
pp. 1376-1380(5)
Authors: Xie, Rongguo; Li, Dongsheng; Yang, Deren; Jiang, Minhua

The rheological behavior of ceramic/polymer mixtures for coextrusion processing
pp. 1381-1387(7)
Authors: Xu, X.; Hilmas, G.

A peak in the hydration reaction at the end of the cement induction period
pp. 1388-1392(5)
Authors: Makar, J.; Chan, G.; Esseghaier, K.

Effect of unidirectional drawing process on fracture behavior of poly(l-lactide)
pp. 1393-1396(4)
Author: Todo, Mitsugu

Synthesis and characterization of ultralong lanthanum hydroxide nanorods via solvothermal method
pp. 1397-1400(4)
Authors: Hou, Bo; Xu, Yao; Wu, Dong; Sun, Yuhan