Journal of Materials Science

Electrical properties of hybrid carbon black/carbon fiber polypropylene composites
pp. 1-8(8)
Authors: Drubetski, M.; Siegmann, A.; Narkis, M.

Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance
pp. 9-18(10)
Authors: Xue, Minxia; Heichal, Yoav; Chandra, Sanjeev; Mostaghimi, Javad

Fracture toughness of glass microsphere-filled polypropylene and polypropylene/poly (ethylene terephthalate-co-isophthalate) blend-matrix composites
pp. 19-29(11)
Authors: Arencón, D.; Velasco, J.; Realinho, V.; Sánchez-Soto, M.; Gordillo, A.

Fabrication and characterization of vacuum plasma sprayed W/Cu-composites for extreme thermal conditions
pp. 30-39(10)
Authors: Pintsuk, G.; Smid, I.; Döring, J.-E.; Hohenauer, W.; Linke, J.

Low-cycle fatigue behavior of AISI 347 stainless steel in salt water
pp. 40-49(10)
Authors: Lin, Chih-Kuang; Chiu, Chui-Hsien

Microstructure and stresses in a keatite solid-solution glass-ceramic
pp. 50-58(9)
Authors: Roos, Christian; Becker, Otmar; Siebers, Friedrich

Effect of high energy ball milling on the displacement reaction in particulate reinforced Al-Si-Cu alloy matrix composite powders
pp. 59-65(7)
Authors: Huo, H.; Woo, K.; Guo, G.; Zhang, D.

Stochastic model of crack paths in composites based on the Langevin equation
pp. 66-71(6)
Author: Coon, Dennis

Ferroelectric transitions in valence compensated Ba_1−x La _x Ti_1−x Cr _x O₃ ceramics
pp. 72-79(8)
Authors: Dwivedi, R.; Om Parkash,; Kumar, Devendra; Srivastava, K.; Singh, P.

Preparation of gold nanoparticles (GNP) aqueous suspensions by a new method involving Tiron
pp. 80-86(7)
Authors: Hori, Mamiko; Pagnoux, Cécile; Baumard, Jean-François; Nogami, Masayuki

PMMA nanocomposites and gradient materials prepared by means of polysilsesquioxane (POSS) self-assembly
pp. 87-92(6)
Authors: Weickmann, Hans; Delto, Ralf; Thomann, Ralf; Brenn, Rüdiger; Döll, Walter; Mülhaupt, Rolf

Thermal and mechanical properties of SEBS-g-MA based inorganic composite materials
pp. 93-100(8)
Authors: Zulfiqar, Sonia; Ahmad, Zahoor; Ishaq, Muhammad; Saeed, Shaukat; Sarwar, Muhammad

Rheological characterisation of bitumen diffusion
pp. 101-108(8)
Authors: Karlsson, Robert; Isacsson, Ulf; Ekblad, Jonas

Improvement of tensile strength and corrosion resistance of high-silicon cast irons by optimizing casting process parameters
pp. 109-117(9)
Authors: Kim, B.; Shin, J.; Lee, S.; Moon, B.

Silver doped antibacterial polyamidoamine side chain dendritic polyesterurethane (SCDPEU) architectures
pp. 118-121(4)
Authors: Ghosh, Samaresh; Banthia, Ajit

Spectroscopic analysis of carbonization behavior of wood, cellulose and lignin
pp. 122-129(8)
Authors: Ishimaru, Kengo; Hata, Toshimitsu; Bronsveld, Paul; Meier, Dietrich; Imamura, Yuji

Synthesis of a minute SiC product from polyvinylsilane with radiation curing: Part II—Ceramization process of radiation cured polyvinylsilane
pp. 130-135(6)
Authors: Idesaki, Akira; Sugimoto, Masaki; Yoshikawa, Masahito; Tanaka, Shigeru; Narisawa, Masaki; Okamura, Kiyohito; Itoh, Masayoshi

Studies on structural, dielectric and electrical properties of Dy _x Bi_1−x FeO₃ solid solutions
pp. 136-142(7)
Authors: Mathe, V.; Patankar, K.

Dielectric studies of tin based chalcogenide glasses
pp. 143-148(6)
Authors: Kumar, Satish; Husain, M.; Zulfequar, M.

Study of the dc resistivity and thermoelectric power in Mn-substituted Ni-Zn ferrites
pp. 149-155(7)
Authors: Sattar, A.; El-Sayed, H.; El-Shokrofy, K.; El-Tabey, M.

Nanotailoring photocrosslinkable epoxy resins with multi-walled carbon nanotubes for stereolithography layered manufacturing
pp. 156-165(10)
Authors: Sandoval, J.; Soto, K.; Murr, L.; Wicker, R.

Microwave absorption properties of substituted BaFe₁₂O₁₉/TiO₂ nanocomposite multilayer film
pp. 166-169(4)
Authors: Qiu, Jianxun; Wang, Yi; Gu, Mingyuan

Magneto-Peltier cooling of single-crystal Bi_1-X Sb _X (X = 0.12 and 0.15) alloys
pp. 170-178(9)
Authors: Yamashita, Osamu; Satou, Kouji; Tomiyoshi, Shoichi

Effect of matrix structure on ultrasonic attenuation of ductile cast iron
pp. 179-184(6)
Authors: Liu, Xinbao; Takamori, Susumu; Osawa, Yoshiaki

Interfacial diffusion effect on phase transitions in Al/Mn multilayered thin films
pp. 185-190(6)
Authors: Srivastava, A.; Yu-Zhang, K.; Kilian, L.; Frigério, J.; Rivory, J.

Surface effects on Young's modulus and hardness of fused silica by nanoindentation study
pp. 191-198(8)
Authors: Zheng, Lianqing; Schmid, Ansgar; Lambropoulos, John

A novel impedance matching material derived from polymer micro-particles
pp. 199-206(8)
Authors: Li, Bo; Zhou, Hong; Huang, Guangsu

Electron microscopy study of ion beam synthesized β-FeSi₂
pp. 207-214(8)
Authors: Marinova, M.; Sutter, E.; Baleva, M.

Compositional dependence of some physical properties of ZnO-PbO-P₂O₅ glasses
pp. 215-220(6)
Authors: Tichá, H.; Schwarz, J.; Tichý, L.

Preparation of Pb(Zr,Ti)O₃-Pb(Mg_1/3Nb_2/3)O₃ piezoelectric ceramics by dry-dry method
pp. 221-227(7)
Authors: Wu, Yugong; Wang, Bin; Cong, Zhibo; Wang, Bu

Study on structure of AlGaN on AlN interlayer by synchrotron radiation XRD and RBS
pp. 228-231(4)
Authors: Qin, Z.; Luo, H.; Chen, Z.; Lu, Y.; Yu, T.; Yang, Z.; Zhang, G.

An experimental study of low velocity impact response in 2/2 twill weave composite laminates manufactured by a novel fabrication process
pp. 232-238(7)
Authors: Zhang, J.; Fox, B.

Poly(dimethylsiloxane)-polyimide blends in the formation of thick polyimide films
pp. 239-251(13)
Authors: Matienzo, L.; Egitto, F.

Synthesis of pure Zn₂SiO₄:Mn green phosphors by simple PVA-metal complex route
pp. 252-258(7)
Authors: Manavbasi, A.; LaCombe, J.

Carbon-nanofiber composite electrodes for thin and flexible lithium-ion batteries
pp. 259-265(7)
Authors: Wu, Mao-Sung; Lee, Jyh-Tsung; Chiang, Pin-Chi; Lin, Jung-Cheng

Electrospray droplet sources for thin film deposition
pp. 266-297(32)
Author: Jaworek, A.

Dielectric properties of Pb(Zn_1/3Ta_2/3)O₃-introduced (Ba,Pb)TiO₃ ceramic system
pp. 298-301(4)
Authors: Seo, Kyung-Han; Kim, Nam-Kyoung

Study on fabrication and mechanism in of porous metals by spark plasma sintering
pp. 302-306(5)
Authors: Kun, Wang; Zhengyi, Fu; Weimin, Wang; Yucheng, Wang; Jinyong, Zhang; Qingjie, Zhang

The effect of flaw shape on fracture initiation at a blunt flaw
pp. 307-313(7)
Author: Smith, E.

Dilatometric behavior and microstructure of sintered Fe-NbC and Fe-TaC composites
pp. 314-319(6)
Authors: Martinelli, Antonio; Paulo, Domingos; Nascimento, Rubens; Távora, Michele; Gomes, Uílame; Alves, Clodomiro

Synthesis and characterization of silicalite powders and membranes with micro-meso bimodal pores
pp. 320-327(8)
Authors: Cooper, C.; Lin, Y.

Microstructure and characterization of phases in TIG welded joints of Zircaloy-4 and stainless steel 304L
pp. 328-331(4)
Authors: Ahmad, M.; Akhter, J.; Akhtar, M.; Iqbal, M.

Studies on a.c. properties of Ca_1−x Sr _x TiO₃ perovskites
pp. 332-336(5)
Authors: El-Mallah, H.; Hegab, N.

Sintering temperature depression in Al₂O₃ by mechanical milling
pp. 337-345(9)
Authors: Goodshaw, H.; Forrester, J.; Suaning, G.; Kisi, E.

Preparation and characterization of Mn-doped BaTiO₃ thin films by magnetron sputtering
pp. 346-351(6)
Authors: Chu, J.; Mahalingam, T.; Liu, C.; Wang, S.

Effect of dendritic orientation on the high temperature oxidation kinetic of tantalum-containing nickel-base alloys
pp. 352-362(11)
Authors: Berthod, P.; Vébert, C.; Aranda, L.

Optical, structural and electrical investigations on PbTe_1−x S _x alloys
pp. 363-367(5)
Authors: Kumar, Sushil; Majeed Khan, M.; Zulfequar, M.; Husain, M.

Construction of electrochromic devices using thiophene based conducting polymers
pp. 368-372(5)
Authors: Coskun, Y.; Cirpan, A.; Toppare, L.

Experimental evaluation of electrical conductivity of microtubules
pp. 373-378(6)
Authors: Umnov, M.; Palusinski, O.; Deymier, P.; Guzman, R.; Hoying, J.; Barnaby, H.; Yang, Y.; Raghavan, S.

Synthesis of carbon coiled micro/nano-structures in the absence of sulphurous promoter
pp. 379-383(5)
Authors: Mukhopadhyay, Kingsuk; Porwal, D.; Ram, K.; Rao, K.

Effect of SmFe and TbFe film thickness on magnetostriction for MEMS devices
pp. 384-388(5)
Authors: Lee, Heung-Shik; Cho, Chongdu; Chang, Sung-Pil

Effect of oxygen vacancies on nonlinear dielectric properties of SrTiO₃ thin films
pp. 389-392(4)
Authors: Liu, X.; Tao, B.; Li, Y.

Ring-on-ring strength measurements on rectangular glass slides
pp. 393-395(3)
Authors: Fett, T.; Rizzi, G.; Guin, J.; Wiederhorn, S.

Electron transport in GaN(ZB) and AlN(WZ)
pp. 396-400(5)
Authors: Rodrigues, Clóves

Hydrothermally stable aluminosilicate mesostructures prepared from zeolite ZSM-5
pp. 401-405(5)
Authors: Wang, Shan; Dou, Tao; Li, Yuping; Dou, Zhirong; Zhang, Ying; Li, Xiaofeng; Yan, Zichun

Synthesis and optical characteristic of ZnO nanorod
pp. 406-408(3)
Authors: Wu, Lili; Wu, Youshi