Journal of Materials Science

Microstructural mechanisms governing the fatigue failure of polyamide 66 fibres
pp. 7261-7271(11)
Authors: Ramirez, J.; Bunsell, A.; Colomban, Ph.

Electrical properties and stability against DC accelerated aging stress of lanthania doped praseodymia-based zinc oxide varistor ceramics
pp. 7272-7278(7)
Author: Nahm, Choon-Woo

Tuning of magnetite nanoparticles to hyperthermic thermoseed by controlled spray method
pp. 7279-7282(4)
Authors: Kim, Dong-Hyun; Kim, Kyoung-Nam; Kim, Kwang-Mahn; Shim, In-Bo; Lee, Myung-Hyun; Lee, Yong-Keun

Growth of highly orientated strontium barium niobate thin films on Si substrates through the sol-gel process using a K: SBN template layer
pp. 7283-7287(5)
Authors: Ye, Hui; Shen, Zhiru; Mak, C.; Wong, K.

Production of single and multi-walled carbon nanotubes using natural gas as a precursor compound
pp. 7288-7295(8)
Authors: Bonadiman, R.; Lima, M.; Andrade, M.; Bergmann, C.

Modification of properties of rayon fibre by graft copolymerization with acrylic monomers
pp. 7296-7301(6)
Authors: Canché-Escamilla, G.; Pacheco-Catalán, D.; Andrade-Canto, S.

Electronic properties of ruthenium sulfide-carbon cluster composite material obtained by calcination of an alternating ruthenium-S-phenylene hybrid copolymer
pp. 7302-7307(6)
Authors: Matsui, Hideo; Kawahara, Tetsuro; Kajita, Hideki; Seguchi, Yasuhiro; Yoshihara, Masakuni

Study of infrared spectroscopy and elastic properties of fine and coarse grained nickel-cadmium ferrites
pp. 7308-7318(11)
Authors: Modi, K.; Rangolia, M.; Chhantbar, M.; Joshi, H.

Defect engineering for high-power 780 nm AlGaAs laser diodes
pp. 7319-7323(5)
Authors: Kim, D.; Choi, W.; Moon, G.; Jang, K.; Kim, T.; Sung, Y.

Nucleation and growth of small fatigue cracks in filled natural rubber under multiaxial loading
pp. 7324-7332(9)
Authors: Mars, W.; Fatemi, A.

Swelling behavior and drug release of NIPAAm/PEGMEA copolymeric hydrogels with different crosslinkers
pp. 7333-7340(8)
Authors: Lee, Wen-Fu; Lin, Yu-Hung

Preparation and properties of nitrile rubber/montmorillonite nanocomposites via latex blending
pp. 7341-7352(12)
Authors: Kader, M.; Kim, K.; Lee, Y.-S.; Nah, C.

Long-term oxidation kinetics of aluminide coatings on alloy steels by low temperature pack cementation process
pp. 7353-7360(8)
Authors: Xiang, Z.; Rose, S.; Datta, P.

Effect of 0.1% vanadium addition on precipitation behavior and mechanical properties of Al-6063 commercial alloy
pp. 7361-7373(13)
Authors: Camero, S.; Puchi, E.; Gonzalez, G.

The structural and electrical properties of nano-scale Sr₂FeMoO₆ under high pressures
pp. 7374-7379(6)
Authors: E, P.; Zhang, J.; Yao, L.; Li, F.; Bao, Z.; Li, J.; Li, Y.; Liu, J.; Jin, C.; Yu, R.

Effects of Co, Mo, and Ni on magnetic properties in 3Si-0.1Sn-0.08Sb alloyed non-oriented electrical steels
pp. 7380-7386(7)
Author: Chang, Sam

Microstructure evolution in adiabatic shear band in α-titanium
pp. 7387-7392(6)
Authors: Yang, Y.; Wang, B.

Processing of submicrometric CaTi_0.8Fe_0.2O_3-δ ceramics by mechanical activation
pp. 7393-7400(8)
Authors: Fuentes, R.; Chinarro, E.; Figueiredo, F.; Soares, R.; Marques, F.; Frade, J. R.

Forming and sintering of porous calcium-hexaaluminate ceramics with hydraulic alumina
pp. 7401-7405(5)
Authors: Nagaoka, T.; Tsugoshi, T.; Hotta, Y.; Yasuoka, M.; Watari, K.

Organoclay effect on transverse compressive strength of glass/epoxy nanocomposites
pp. 7406-7412(7)
Authors: Tsai, Jia-Lin; Kuo, Jui-Ching; Hsu, Shin-Ming

Metal nanoparticles incorporation during the photopolymerization of polypyrrole
pp. 7413-7418(6)
Authors: Martins, C.; Almeida, Y.; Nascimento, G.; Azevedo, W.

Dielectric studies of polyvinyl-acetate-based phantom for applications in microwave medical imaging
pp. 7419-7424(6)
Authors: Bindu, G.; Lonappan, Anil; Thomas, Vinu; Aanandan, C.; Mathew, K.

Oxide ceramic laminates with highly textured α-alumina interlayers: I. Texture control and laminate formation
pp. 7425-7436(12)
Authors: Wei, Ming; Zhi, Dan; Brandon, David

Enhancement of the Seebeck coefficient in touching M/Bi-Te/M (M = Cu and Ni) composites
pp. 7437-7445(9)
Authors: Yamashita, Osamu; Odahara, Hirotaka

Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming
pp. 7446-7453(8)
Authors: Wu, Horng-yu; Perng, Jau-yuean; Shis, Shyh-hung; Chiu, Chui-hung; Lee, Shyong; Wang, Jian-yih

In-situ X-ray-diffraction studies of hydrogenated nanocrystalline gadolinium films
pp. 7454-7458(5)
Authors: Shalaan, E.; Ehses, K.-H.; Schmitt, H.

Effects of microballoons' size and content in epoxy on compressive strength and modulus
pp. 7459-7465(7)
Authors: Kishore,; Shankar, Ravi; Sankaran, S.

Effect of chopped Si-Al-C fiber addition on the mechanical properties of silicon carbide composite
pp. 7466-7473(8)
Authors: Sato, Masanori; Itatani, Kiyoshi; Tanaka, Tsuyoshi; Davies, Ian; Koda, Seiichiro

Admicellar polymerization of styrene with divinyl benzene on alumina particles: the synthesis of white reinforcing fillers
pp. 7474-7482(9)
Authors: Wang, Shuqin; Russo, Tiziana; Qiao, Greg; Solomon, David; Shanks, Robert

Studies on photoconductivity, photovoltaic effect and photoluminescence in chemically deposited (Cd_0.95-Pb_0.05)S:CdCl₂,Dy/Y films
pp. 7483-7491(9)
Authors: Bhushan, S.; Shrivastava, Swati; Shrivastava, Ashok

In-situ thermal polymerization of rechargeable lithium batteries with poly(methyl methacrylate) based gel-polymer electrolyte
pp. 7492-7497(6)
Authors: Zhou, Y.; Xie, S.; Chen, C.

The influence of porosity on the fatigue crack growth behavior of Ti-6Al-4V laser welds
pp. 7498-7505(8)
Authors: Tsay, L.; Shan, Y.-P.; Chao, Y.-H.; Shu, W.

Model to determine recrystallization temperature of tungsten based dilute solid solution alloys
pp. 7506-7508(3)
Authors: Zhang, Taiquan; Wang, Yujin; Zhou, Yu; Lei, Tingquan; Song, Guiming

Influence of temperature on the mechanical behaviour of polyester fibres
pp. 7509-7523(15)
Authors: Le Clerc, C.; Bunsell, A.; Piant, A.

Effects of microalloying and ceramic particulates on mechanical properties of TiAl-based alloys
pp. 7524-7529(6)
Authors: Peng, L.; Li, Z.; Li, H.

Novel wet-chemical synthesis and characterization of nanocrystalline CeO₂ and Ce_0.8Gd_0.2O_1.9 as solid electrolyte for intermediate temperature solid oxide fuel cell (IT-SOFC) applications
pp. 7530-7536(7)
Authors: Rambabu, B.; Ghosh, Samrat; Jena, Hrudananda

Fatigue property of semisolid A357 aluminum alloy under different heat treatment conditions
pp. 7537-7544(8)
Authors: Gan, Yong; Overfelt, Ruel

Continuously responsive epoxy-amine cross-linked silicon sol-gel materials
pp. 7545-7554(10)
Authors: Woods, Meghan; Vreugdenhil, Andrew

Transmission electron microscopy observations on the microstructure of naturally aged Al-Mg-Si alloy AA6022 processed with an electric field
pp. 7555-7561(7)
Authors: Conrad, H.; Ramachandran, S.; Jung, K.; Narayan, J.

Nano and micro structural studies of thin films of ZnO
pp. 7562-7570(9)
Authors: Bahadur, Harish; Samanta, S.; Srivastava, A.; Sood, K.; Kishore, R.; Sharma, R.; Basu, A.; Rashmi,; Kar, M.; Pal, Prem; Bhatt, Vivekanand; Chandra, Sudhir

Fluorescence spectroscopy analysis of Al-Al₂O₃ composites with coarse interpenetrating networks
pp. 7571-7579(9)
Authors: Moon, Robert; Hoffman, Mark; Tochino, Shigemi; Lee, Chang; Pezzotti, Giuseppe

Titanium-doped indium oxide films prepared by d.c. magnetron sputtering using ceramic target
pp. 7580-7584(5)
Authors: Abe, Yoshiyuki; Ishiyama, Noriko

Thermomechanical treatment of 70/30 brass containing iron impurity
pp. 7585-7589(5)
Authors: Aghaie-Khafri, M.; Mohebati-Jouibari, A.

A study on the diffusion kinetics of borides on boronized Cr-based steels
pp. 7590-7596(7)
Author: Taktak, Sukru

Formation of LaFeO₃ and thermal decomposition reactions in lanthanum(III) oxalate-iron(II) oxalate crystalline mixture
pp. 7597-7603(7)
Authors: Gabal, M.; Ata-Allah, S.; Al-Youbi, A.; Basahel, S.; Al-Thabaiti, S.

Oxidative polymerization of pyrrole in the presence of a poly (sodium-p-styrenesulfonate) and its gas-responses
pp. 7604-7610(7)
Authors: Ma, Xingfa; Li, Guang; Wang, Mang; Chen, Hongzheng

Thermo-mechanical analysis of dental silicone polymers
pp. 7611-7616(6)
Authors: Lacoste-Ferré, M.; Demont, Ph.; Dandurand, J.; Dantras, E.; Blandin, M.; Lacabanne, C.

Preparation and characterization of nanocrystalline chromium boride
pp. 7617-7619(3)
Authors: Qin, Li; Zhang, Xitian; Liang, Yao; Zhang, E.; Gao, Hong; Zhang, Zhiguo

Processing and ferroelectric behavior of textured KSr₂Nb₅O₁₅ ceramics
pp. 7620-7627(8)
Author: Duran, Cihangir

Influence of solvents on the synthesis and electrochemical properties of Li[Li_1/5Ni_1/10Co_1/5Mn_1/2]O₂ for the applications in lithium-ion batteries
pp. 7628-7635(8)
Authors: Park, K.; Song, C.; Stephan, A.; Jeong, S.; Nahm, K.; Oh, S.; Kim, Y.

Grain size dependence of tensile behavior in nanocrystalline Ni-Fe alloys
pp. 7636-7642(7)
Authors: Li, Hongqi; Ebrahimi, Fereshteh; Choo, Hahn; Liaw, Peter

Influence of isothermal aging on secondary phases precipitation and toughness of a duplex stainless steel SAF 2205
pp. 7643-7649(7)
Authors: Calliari, I.; Zanesco, M.; Ramous, E.

Natural superhydrophilicity of sol-gel derived SiO₂-TiO₂ composite films
pp. 7650-7662(13)
Authors: Permpoon, S.; Berthomé, G.; Baroux, B.; Joud, J.; Langlet, M.

Young's modulus of zirconia at high temperature
pp. 7663-7666(4)
Authors: Fogaing, E.; Lorgouilloux, Y.; Huger, M.; Gault, C.