Journal of Materials Science

Effect of a commercial hard anodizing on the fatigue property of a 2014-T6 aluminium alloy
pp. 5803-5809(7)
Author: Sadeler, R.

Electrical behavior of low density polyethylene containing an inhomogeneous distribution of ZnO nanoparticles
pp. 5810-5814(5)
Authors: Hong, J.; Schadler, L.; Siegel, R.; Mårtensson, E.

Synthesis of Mg-α-sialon from the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere
pp. 5815-5819(5)
Authors: Li, Yawei; Sang, Shaobai; Jin, Shengli; Yang, Chunyan; Li, Nan

Crystallization behavior of PZT film prepared by sol-gel route
pp. 5820-5827(8)
Authors: Yang, F.; Wang, L.; Zheng, F.; Fei, W.

Effect of electrodes and zeolite cover layer on hydrocarbon sensing with p-type perovskite SrTi_0.8Fe_0.2O_3-δ thick and thin films
pp. 5828-5835(8)
Authors: Sahner, Kathy; Schönauer, Daniela; Moos, Ralf; Matam, Mahesh; Post, Michael

Effect of DC biasing field on dielectric properties of ZrO₂-doped barium strontium titanate
pp. 5836-5840(5)
Author: Chen, Yih-Chien

LED switching of spiropyran-doped polymer films
pp. 5841-5844(4)
Authors: Stitzel, Shannon; Byrne, Robert; Diamond, Dermot

Preparation and properties of composite particles made by nano zinc oxide coated with titanium dioxide
pp. 5845-5850(6)
Authors: Wu, W.; Cai, Y-W.; Chen, J-F.; Shen, S-L.; Martin, A.; Wen, L-X.

Morphology and modulus of vapor grown carbon nano fibers
pp. 5851-5856(6)
Authors: Uchida, Tetsuya; Anderson, David; Minus, Marilyn; Kumar, Satish

Morphological, crystallization and plasticization studies on isomorphic blends of poly (vinyl fluoride) (PVF) and poly (vinylidene difluoride) (PVDF): using microhardness, XRD and SEM techniques
pp. 5857-5861(5)
Authors: Gupta, A.; Bajpai, R.; Keller, J.

Investigation of the microwave curing of the PR500 epoxy resin system
pp. 5862-5869(8)
Authors: Wallace, Mark; Attwood, David; Day, Richard; Heatley, Frank

Influence of thermal treatment on the water release and the glassy structure of perlite
pp. 5870-5881(12)
Authors: Roulia, M.; Chassapis, K.; Kapoutsis, J.; Kamitsos, E.; Savvidis, T.

Shear induced phase coarsening in Polystyrene/Styrene-ethylene-butylene-styrene blends
pp. 5882-5889(8)
Authors: Wang, Yong; Wang, Cong; Zhang, Qin; Yang, Hong; Du, Rongni; Fu, Qiang

Optimization of hardening of Al-Zr-Sc cast alloys
pp. 5890-5899(10)
Authors: Belov, N.; Alabin, A.; Eskin, D.; Istomin-Kastrovskii, V.

The development of the microstructural and electrical characteristics of NTC thick-film thermistors during firing
pp. 5900-5906(7)
Authors: Hrovat, Marko; Belavič, Darko; Holc, Janez; Cilenšek, Jena

Thermal and optical properties of Cd_1-x Zn _x S thin films by photoacoustics
pp. 5907-5914(8)
Authors: Raji, P.; Sanjeeviraja, C.; Ramachandran, K.

Thermal, mechanical and vibration characteristics of epoxy-clay nanocomposites
pp. 5915-5925(11)
Authors: Mohan, T.; Ramesh Kumar, M.; Velmurugan, R.

Investigations into sol-gel silica and silica hybrid coatings for dielectromagnetic soft magnetic composite applications
pp. 5926-5936(11)
Authors: Pang, Y.; Hodgson, S.; Weglinski, B.; Gaworska, D.

Epitaxial growth of ZnO films on (100) and (001) γ-LiAlO₂ substrates by pulsed laser deposition
pp. 5937-5940(4)
Authors: Zou, Jun; Zhou, Shengming; Xu, Jun; Zhang, Xia; Li, Xiaomin; Xie, Zili; Han, Ping; Zhang, Rong

Micromechanical analysis of an elastomer filled with particles organized in chain-like structure
pp. 5941-5953(13)
Authors: Coquelle, E.; Bossis, G.; Szabo, D.; Giulieri, F.

Microwave assisted synthesis of nanocrystalline YAG
pp. 5954-5957(4)
Authors: Vaidhyanathan, B.; Binner, J.

“The implication of rheological principles for characterization of semi-solid Al-Si cast billets”
pp. 5958-5965(8)
Authors: Lashkari, Omid; Ghomashchi, Reza

The relationship between the fracture toughness and grain boundary characteristics in hot-dip galvanized zinc coatings
pp. 5966-5975(10)
Authors: Vincent, G.; Bonasso, N.; Lecomte, J.; Colinet, B.; Gay, B.; Esling, C.

The influence of tetrahydrofuran treatment on hydrogen storage properties of the magnesium
pp. 5976-5980(5)
Author: Au, Ming

Structure-property relationship in sol-gel derived polymer/silica hybrid nanocomposites prepared at various pH
pp. 5981-5993(13)
Authors: Bandyopadhyay, Abhijit; Sarkar, Mousumi; Bhowmick, Anil

Effects of nitrogen content and weld cooling time on the simulated heat-affected zone toughness in a Ti-containing steel
pp. 5994-6000(7)
Authors: Bang, Kook-soo; Park, Chan; Liu, Stephen

¹³C CP/MAS NMR study of a wood/phenol-formaldehyde resin bondline
pp. 6001-6005(5)
Authors: Laborie, Marie-Pierre; Frazier, Charles

Relationship between the transfer properties of the coating and impedance spectroscopy in reinforced cement-based materials
pp. 6006-6014(9)
Authors: Aït-Mokhtar, A.; Poupard, O.; Dumargue, P.

Fractographic and numerical study of hydrogen-plasticity interactions near a crack tip
pp. 6015-6025(11)
Authors: Toribio, J.; Kharin, V.

Extrusion of alumina fibre using sol-gel precursor
pp. 6026-6030(5)
Authors: Chandradass, J.; Balasubramanian, M.

Subcritical crack growth and power law exponent of Y-Si-Al-O(-N) glasses in aqueous environment
pp. 6031-6034(4)
Authors: Graaf, D.; Hintzen, H.; With, G.

A study on the carbon soot derived from the wood combustion and on the relative alkali-extractable fraction
pp. 6035-6045(11)
Authors: Arrais, A.; Diana, E.; Boccaleri, E.

Preparation of carbon coated ceramic foams by pyrolysis of polyurethane
pp. 6046-6055(10)
Authors: Mann, M.; Shter, G.; Grader, G.

Effects of Pb²⁺ doping on La₄Ti₉O₂₄ ceramics
pp. 6056-6061(6)
Authors: Liu, Yuan-Wen; Lin, Pang; Chu, Ming-Wen

Fabrication of yttrium-stabilized α-SiAlON powders with rod-like crystals by combustion synthesis
pp. 6062-6068(7)
Authors: Liu, Guanghua; Chen, Kexin; Zhou, Heping; Ning, Xiaoshan; Pereira, C.; Ferreira, J.

The correlation between solid solubility and its temperature dependence for solutes in aluminium
pp. 6069-6071(3)
Author: Jones, H.

On the use of dynamic mechanical thermal analysis (DMTA) for measuring glass transition temperature of polymer matrix fibre reinforced composites
pp. 6072-6076(5)
Authors: Bussu, G.; Lazzeri, A.

Cyclic indentation of an elastic-perfectly plastic material
pp. 6077-6080(4)
Authors: Yang, Fuqian; Saran, Aditi

Spontaneous formation of the B2 phase from a decagonal quasicrystal under reduced constraint
pp. 6081-6086(6)
Authors: Kim, S.; Chattopadhyay, K.; Inkson, B.; Möbus, G.; Kim, W.; Kim, D.

Observations of microstructural refinement in Mg-Al-Si alloys containing strontium
pp. 6087-6089(3)
Authors: Srinivasan, A.; Pillai, U.; Swaminathan, J.; Das, S.; Pai, B.

Toughening effect of K resin on the fracture of polyamide 6/K resin blends
pp. 6090-6094(5)
Authors: Jing, Bo; Dai, Wen; Liu, Peng

Fabrication, thermal expansions, and mechanical properties of carbon/aluminum composites based on wood templates
pp. 6095-6099(5)
Authors: Wang, Tian-Chi; Fan, Tong-Xiang; Zhang, Di; Zhang, Guo-Ding

Reducing the microcracks of mesophase-pitch-based carbon foams by long-time-coking method
pp. 6100-6102(3)
Authors: Wang, Mei-Xian; Wang, Cheng-Yang; Zhang, Wei

Synthesis, characteristics of blue electroluminescent copolymers containing fluorene unit and aliphatic non-conjugated segments
pp. 6103-6106(4)
Authors: Yuan, Zhuliang; Yu, Zongqiang; Tan, Songting

Phase equilibrium and glass formation in the SeO₂-Ag₂O-MoO₃ system
pp. 6107-6111(5)
Authors: Bachvarova-Nedelcheva, A.; Ivanova, Y.; Dimitriev, Y.; Iordanova, R.

Glass forming ability of Gd₅₅Al₁₅Ni₃₀ ternary alloy
pp. 6112-6115(4)
Authors: Ding, D.; Xia, L.; Jo, C.; Dong, Y.

A feasibility study of plasma nitriding of steel with an oxide layer on the surface
pp. 6116-6118(3)
Authors: Li, C.; Dong, H.; Bell, T.

Porosity and pore space characteristics of starch-processed porous ceramics
pp. 6119-6122(4)
Authors: Gregorová, E.; Živcová, Z.; Pabst, W.

Effect of blending sequence on the mechanical properties of ternary blends prepared from recycled poly(ethylene terephthalate)
pp. 6123-6125(3)
Authors: Fung, K.; Li, R.

Synthesis of Y₂O₃ with nestlike structures
pp. 6126-6129(4)
Authors: Hu, Chaoquan; Gao, Zhenghong

Specific heat of the Ba_0.7Sr_0.3Ti_1−y Zr _y O (y = 0, 0.03, 0.05, 0.1) ferroelectric ceramics obtained by the temperature relaxation method
pp. 6130-6133(4)
Authors: García, S.; Marín, E.; Delgado-Vasallo, O.; Portelles, J.; Siqueiros, J.; Martínez, E.; Heiras, J.

Fabrication of high-dispersibility nanocrystals of calcined hydroxyapatite
pp. 6134-6137(4)
Authors: Okada, Masahiro; Furuzono, Tsutomu

Effects of precursors in the ethanol-based sol-gel synthesis of Zn₂SiO₄:Mn phosphor
pp. 6138-6141(4)
Authors: Kim, C.; Kwon, M.

Interfacial fracture properties of environmentally friendly hybrid systems
pp. 6142-6145(4)
Authors: Reyes-Villanueva, G.; Gupta, S.

Synthesis of (Na_0.5Bi_0.5)TiO₃ and (Na_0.5Bi_0.5)_0.92Ba_0.08TiO₃ powders by a citrate method
pp. 6146-6149(4)
Authors: Xu, Qing; Chen, Shutao; Chen, Wen; Huang, Duanping; Zhou, Jing; Sun, Huajun; Li, Yueming

Preparation of dip-coated TiO₂ photocatalyst on ceramic foam pellets
pp. 6150-6153(4)
Authors: Kim, Hyunjung; Lee, Sanghun; Han, Yoseop; Park, Jaikoo

AFM fracture surface study of vinylester and unsaturated polyester based thermosets
pp. 6154-6158(5)
Authors: Mosiewicki, M.; Schroeder, W.; Leite, F.; Hermann, P.; Curvelo, A.; Aranguren, M.; Borrajo, J.

Application of electro-spray ionization mass spectrometry for characterization of titanium polyoxoalkoxides in sol-gel processes
pp. 6159-6161(3)
Authors: Soloviev, A.; Søgaard, E.

Fabrication and microstructure of the SrTiO₃ composite membranes by Sol-Gel process
pp. 6162-6164(3)
Authors: Bae, Dong-Sik; Kim, Eun-Jung; Park, Sang-Whan; Han, Kyong-Sop

Effect of aging on transformation behavior and shape memory effect of a CuAlNb high temperature shape memory alloy
pp. 6165-6167(3)
Authors: Gao, Z.; Wu, Y.; Tong, Y.; Cai, W.; Zheng, Y.; Zhao, L.

Acid-mediated sol-gel synthesis of visible-light active photocatalysts
pp. 6168-6170(3)
Authors: Dong, C.; Xian, A.; Han, E.; Shang, J.

Ion transport and battery studies of a new (PVP + KIO₃) polymer electrolyte system
pp. 6171-6173(3)
Authors: Siva Kumar, J.; Jaipal Reddy, M.; Subba Rao, U.

Radiative trapping effect of Yb³⁺ ions in lead-germanate glasses
pp. 6174-6177(4)
Authors: Yang, Zhongmin; Jiang, Zhonghong; Liu, Yuehui; Deng, Zaide

Solid particle erosion of hot-pressed silicon nitride
pp. 6178-6180(3)
Author: Kim, Jong

Relations between the creep-rupture properties and the fractal dimension of three-dimensional fracture surface in a cobalt-base alloy
pp. 6181-6184(4)
Authors: Tanaka, M.; Kimura, Y.; Oyama, N.; Kato, R.

Effect of CaF₂ on the sintering and thermal expansion of La_0.85Sr_0.15Cr_0.95O₃
pp. 6185-6188(4)
Authors: Ding, Xifeng; Guo, Lucun

Polyaniline stabilized highly dispersed gold nanoparticle: an in-situ chemical synthesis route
pp. 6189-6192(4)
Authors: Mallick, Kaushik; Witcomb, Mike; Scurrell, Mike