Journal of Materials Science

Preface
pp. 5051-5052(2)
Authors: Tomsia, Antoni; Moya, Jose; Carter, C.

The effect of the composition of the intergranular film in alumina on preferential adsorption and growth
pp. 5053-5060(8)
Authors: Garofalini, Stephen; Zhang, Shenghong

Ab initio modeling of clean and Y-doped grain boundaries in alumina and intergranular glassy films (IGF) in β-Si₃N₄
pp. 5061-5067(7)
Authors: Ching, W.; Chen, Jun; Rulis, Paul; Ouyang, Lizhi; Misra, Anil

Experimental evidence of liquid drop break-up in complete wetting experiments
pp. 5068-5080(13)
Authors: Rioboo, R.; Adão, M. H.; Voué, M.; Coninck, J. De

Wettability and spreading kinetics of molten aluminum on copper-coated ceramics
pp. 5081-5087(7)
Authors: León, C.; Mendoza-Suarez, G.; Drew, R

Wetting of Group IV diborides by liquid metals
pp. 5088-5098(11)
Authors: Passerone, A.; Muolo, M.; Passerone, D.

Au-Sapphire (0001) solid-solid interfacial energy
pp. 5099-5107(9)
Authors: Sadan, Hila; Kaplan, Wayne

Y₂O₃/(Cu-Me) systems (Me=Al, Ti): interface reactions and wetting
pp. 5108-5112(5)
Authors: Barzilai, S.; Aizenshtein, M.; Froumin, N.; Frage, N.

Influence of scaffold meso-scale features on bone tissue response
pp. 5113-5121(9)
Authors: Rekow, Dianne; Thompson, P.; Ricci, John

The elastic modulus of spruce wood cell wall material measured by an in situ bending technique
pp. 5122-5126(5)
Authors: Orso, Steffen; Wegst, Ulrike; Arzt, Eduard

Microspheres as building blocks for hydroxyapatite/polylactide biodegradable composites
pp. 5127-5133(7)
Authors: Russias, J.; Saiz, E.; Nalla, R.; Tomsia, A.

Delamination under Hertzian cyclic loading of a glass coating on Ti6al4v for implants
pp. 5134-5145(12)
Authors: Pavón, J.; Jiménez-Piqué, E.; Anglada, M.; Saiz, E.; Tomsia, A.

HRTEM study of [001] low-angle tilt grain boundaries in fiber-textured BaTiO₃ thin films
pp. 5146-5150(5)
Authors: Igarashi, M.; Sato, Y.; Shibata, N.; Yamamoto, T.; Ikuhara, Y.

Grain boundary grooving in molybdenum bicrystals
pp. 5151-5160(10)
Authors: Rabkin, E.; Gabelev, A.; Klinger, L.; Semenov, V.; Bozhko, S.

Bonding at copper-alumina interfaces established by different surface treatments: a critical review
pp. 5161-5168(8)
Authors: Scheu, C.; Gao, M.; Oh, S.; Dehm, G.; Klein, S.; Tomsia, A.; Rühle, M.

Texture in solid-state reactions
pp. 5169-5184(16)
Authors: Farrer, Jeffrey; Carter, C.

Interface interaction in the (B₄C + TiB₂)/Cu system
pp. 5185-5189(5)
Authors: Aizenshtein, M.; Frage, N.; Froumin, N.; Shapiro-Tsoref, E.; Dariel, M.

The role of metal-ceramic interfaces on the high temperature mechanical response of nanostructured nickel-yttria tetragonal zirconia polycrystals (Ni-YTZP)
pp. 5190-5193(4)
Authors: Morales-Rodríguez, Ana; Gómez-García, Diego; García-Gañán, Carmen; Zapata-Solvas, Eugenio; Domínguez-Rodríguez, Arturo

Mechanical properties and interfaces of zirconia/nickel in micro - and nanocomposites
pp. 5194-5199(6)
Authors: Lopez-Esteban, S.; Rodriguez-Suarez, T.; Esteban-Betegón, F.; Pecharromán, C.; Moya, J.

Elaboration of self-coating alumina-based porous ceramics
pp. 5200-5207(8)
Authors: Gremillard, Laurent; Casadei, Romaric; Saiz, Eduardo; Tomsia, Antoni

Antibacterial activity of copper monodispersed nanoparticles into sepiolite
pp. 5208-5212(5)
Authors: Esteban-Cubillo, Antonio; Pecharromán, Carlos; Aguilar, Eduardo; Santarén, Julio; Moya, José

TiN coating on an electrical discharge machined WC-Co hardmetal: surface integrity effects on indentation adhesion response
pp. 5213-5219(7)
Authors: Casas, B.; Anglada, M.; Sarin, V.; Llanes, L.

Design and control of porosity in oxide thin films grown by PECVD
pp. 5220-5226(7)
Authors: Borrás, A.; Barranco, A.; González-Elipe, A.

Calcium phosphate silicate ceramics for heavy metal immobilization and antibacterial activity in waste water
pp. 5227-5230(4)
Authors: Barba, Flora; Callejas, Pío

Microwave sintering of nanocrystalline Ytzp (3 Mol%)
pp. 5231-5234(4)
Authors: García-Gañán, Carmen; Meléndez-Martínez, Juan; Gómez-García, Diego; Domínguez-Rodríguez, Arturo

Analytical electron microscope study of the dissolution of the Fe₃C iron carbide phase (cementite) during a graphitisation anneal of carbon steel
pp. 5235-5241(7)
Authors: He, K.; Brown, A.; Brydson, R.; Edmonds, D.

Study on the controlled growth of carbon nanospheres from de-oiled asphalt
pp. 5242-5245(4)
Authors: Fan, Yantao; Liu, Guanghuan; Liu, Xuguang; Xu, Bingshe

Temperature of the milling balls in shaker and planetary mills
pp. 5246-5249(4)
Authors: Takacs, L.; McHenry, J.

Facile synthesis of capped γ-Fe₂O₃ and Fe₃O₄ nanoparticles
pp. 5250-5256(7)
Authors: Bourlinos, A.; Bakandritsos, A.; Georgakilas, V.; Tzitzios, V.; Petridis, D.

Characterisation of aqueous suspensions of fumed aluminium oxide in presence of two Dolapix dispersants
pp. 5257-5262(6)
Authors: Gaydardzhiev, S.; Ay, P.

Low-cycle fatigue behavior of in situ TiB₂/Cu composite prepared by reactive hot pressing
pp. 5263-5268(6)
Authors: Tjong, S.; Wang, G.

Investigation on addition of ZrO₂-3 mol% Y₂O₃ powder on sintering behavior and mechanical properties of B₄C
pp. 5269-5272(4)
Authors: Baharvandi, H.; Hadian, A.; Abdizadeh, A.; Ehsani, N.

Investigation into the microstructure and mechanical properties of diffusion bonded TiAl alloys
pp. 5273-5282(10)
Authors: Çam, G.; İpekoğlu, G.; Bohm, K.; Koçak, M.

Al-assisted Anodic Etched Porous Silicon
pp. 5283-5286(4)
Authors: Zhao, Yue; Li, Dongsheng; Yang, Deren

Quantitative hydrogen measurements in PECVD and HWCVD a-Si:H using FTIR spectroscopy
pp. 5287-5291(5)
Authors: Goldie, D.; Persheyev, S.

The effect of Copper alloying additions on the crystallization of an amorphous Fe-Si-B alloy
pp. 5292-5301(10)
Authors: Zhang, Y.; Ramanujan, R.

Epitaxial growth of Sr _x Ba_1−x Nb₂ O₆ (SBN) thin films on Pt coated MgO substrates: the determining control of platinum crystallographic orientation
pp. 5302-5309(8)
Authors: Cuniot-Ponsard, M.; Desvignes, J.; Bellemain, A.

Wear behaviour, fluorescence and SEM investigations on nanocomposite zirconia-toughened alumina
pp. 5310-5316(7)
Authors: Taddei, P.; Affatato, S.; Torrecillas, R.; Fagnano, C.; Ferrieri, P.; Toni, A.

Dielectric properties of BaBi₂Nb₂O₉ ceramics
pp. 5317-5322(6)
Authors: Adamczyk, M.; Ujma, Z.; Pawełczyk, M.

Optoelectronic and dielectric properties of GaAs _x Sb_1-x ternary alloys
pp. 5323-5328(6)
Authors: Mezrag, F.; Aouina, N.; Bouarissa, N.

A TEM study of the combined effect of severe plastic deformation and (Zr), (Sc+Zr)-containing dispersoids on an Al-Mg-Si alloy
pp. 5329-5338(10)
Authors: Cabibbo, M.; Evangelista, E.

Characterizations of trimetallic heteronuclear Bi_1−x La _x [Fe(CN)₆]·n(H₂O) complexes and their thermal decomposition products
pp. 5339-5345(7)
Authors: Aono, Hiromichi; Kondo, Nobuyuki; Katagishi, Haruo; Kurihara, Masato; Sakamoto, Masatomi; Sadaoka, Yoshihiko

Effect of oxygen injection on synthesizing barium titanate nanoparticles by plasma chemical vapor deposition
pp. 5346-5358(13)
Authors: Suzuki, Keigo; Kijima, Kazunori

Nickel and iron nano-particles in natural rubber composites
pp. 5359-5364(6)
Authors: El-Nashar, D.; Mansour, S.; Girgis, E.

Characterization of complex, solid-state flow and mixing in the friction-stir welding (FSW) of aluminum alloy 6061-T6 to magnesium alloy AZ91D using color metallography
pp. 5365-5370(6)
Authors: Somasekharan, A.; Murr, L.

Morphology and orientation of the equilibrated Au-sapphire (101¯0) interface
pp. 5371-5375(5)
Authors: Sadan, Hila; Kaplan, Wayne

Friction stir welding of Inconel alloy 600
pp. 5376-5379(4)
Authors: Ye, Fuxing; Fujii, Hidetoshi; Tsumura, Takuya; Nakata, Kazuhiro

Microdefects induced by cavitation for gettering in silicon wafer
pp. 5380-5382(3)
Authors: Macodiyo, Dan; Soyama, Hitoshi; Masakawa, Takashi; Hayashi, Kazuo

Bridgman growth of lead molybdate crystals
pp. 5383-5385(3)
Authors: Chen, Hongbing; Ge, Congxin; Li, Rongsheng; Wang, Jinhao

The influence of moisture on the mechanical properties of wood polymer composites
pp. 5386-5390(5)
Authors: Huang, S.; Cortes, P.; Cantwell, W.

Fine grained bismuth sodium titanate ceramics prepared via vibro-milling method
pp. 5391-5394(4)
Authors: Khamman, O.; Watcharapasorn, A.; Pengpat, K.; Tunkasiri, T.

Strengthening mechanisms of carbon element in in situ TiC/Ti-1100 composites
pp. 5395-5398(4)
Authors: Ma, Fengcang; Lu, Weijie; Qin, Jining; Zhang, Di

Silica nanoparticles-walled microcapsules
pp. 5399-5401(3)
Authors: Liu, Yuyang; Chen, Xianqiong; Xin, J.

Ageing behavior of Al-4.5 wt% Cu matrix alloy reinforced with Al₂O₃ and ZrSiO₄ particulate varying particle size
pp. 5402-5406(5)
Authors: Das, Sanjeev; Das, S.; Das, K.