Journal of Materials Science

Contents by keyword
pp. v-v(1)

Pressure induced structural behaviour in f-electron based AB, AB₂ and AB₃ intermetallics
pp. 3207-3228(22)
Authors: Shekar, N.; Sahu, P.

Fatigue behavior of AZ31 magnesium alloy produced by solid-state recycling
pp. 3229-3232(4)
Authors: Chino, Yasumasa; Furuta, T.; Hakamada, M.; Mabuchi, M.

Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding
pp. 3233-3239(7)
Authors: Hasçalik, A.; Ünal, E.; Özdemir, N.

Electrical characterization of titanium nitride surfaces for pacing electrodes
pp. 3241-3247(7)
Authors: Sánchez, G.; Dalchiele, E.; Bologna Alles, A.

In situ synthesis of Al₂O₃ particulate-reinforced Al matrix composite by low temperature sintering
pp. 3249-3253(5)
Authors: Huo, H.; Woo, K.

Influence of various fluids on the interlaminar shear strength (ILSS) and impact behaviour of carbon/pei composites
pp. 3255-3262(8)
Authors: Sinmazçelik, T.; Arici, A.

One-step synthetic route for producing nanoslabs: Zn-oriented polycrystalline and single-crystalline zinc oxide
pp. 3263-3269(7)
Authors: Ullah, Md.; Kim, Il; Ha, Chang-Sik

The mechanical properties and fracture behaviour of epoxy-inorganic micro- and nano-composites
pp. 3271-3297(27)
Authors: Kinloch, A.; Taylor, A.

Microstructure of alumina reinforced with tungsten carbide
pp. 3299-3302(4)
Authors: Acchar, Wilson; Zollfrank, Cordt; Greil, Peter

Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth
pp. 3303-3313(11)
Authors: Duran, C.; Tür, Y.

Manufacturing of cellular β-SiAlON/β-SiC composite ceramics from cardboard
pp. 3315-3322(8)
Authors: Rambo, C.; Sieber, H.

Electrochemical characterization of titanium biomaterials using the Mini-cell System
pp. 3323-3327(5)
Authors: Nascimento, M.; Mueller, W.; Carvalho, A.; Tomás, H.

Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions
pp. 3329-3333(5)
Authors: Karaminezhaad, M.; Sharafi, S.; Dalili, K.

Tailoring size of BaTiO₃ nanocrystals via ambient conditions sol process
pp. 3335-3340(6)
Authors: Devaraju, Naga; Lee, Burtrand; Wang, Xinyu; Viviani, Massimo; Nanni, Paolo

The bending-kinking analysis of a single-walled carbon nanotube—a combined molecular dynamics and continuum mechanics technique
pp. 3341-3347(7)
Authors: Mylvaganam, K.; Vodenitcharova, T.; Zhang, L.

Compression of homogeneous and graded SiC/EP rings: experimental results and FE modelling
pp. 3349-3355(7)
Authors: Tsotra, P.; Friedrich, K.; Felhos, D.; Varadi, K.

Analysis of structure and properties of biodegradable regenerated silk fibroin fibers
pp. 3357-3361(5)
Authors: Zuo, B.; Dai, L.; Wu, Z.

Surface modification of Ti-4Al-2V alloy by nitrogen implantation
pp. 3363-3367(5)
Authors: Wang, Z.; Zu, X.; Xiang, X.; Zhu, S.; Wang, L.

Physical and mechanical behavior of hot rolled HDPE/HA composites
pp. 3369-3376(8)
Authors: Pandey, A.; Jan, E.; Aswath, P.

Sol-gel synthesis of hydrotalcite — like compounds
pp. 3377-3382(6)
Authors: Paredes, S.; Fetter, G.; Bosch, P.; Bulbulian, S.

TG/DTA-based techniques for the determination of equilibrium vapour pressures of N,N′-propylenebis(2,4-pentanedion-iminoato)nickel(II) for CVD applications
pp. 3383-3390(8)
Authors: Arockiasamy, S.; Premkumar, P.; Sreedharan, O.; Mallika, C.; Raghunathan, V.; Nagaraja, K.

Application of alumoxane nanoparticles as precursors for 3D alumina features
pp. 3391-3401(11)
Authors: Loscutova, Ryan; Barron, Andrew

Characterizing microstructure of refractory porous materials
pp. 3403-3415(13)
Authors: Chen, Xin; Penumadu, Dayakar

Hydrothermal-electrochemical codeposited hydoxyapatite/yttria-stabilized zirconia composite coating
pp. 3417-3424(8)
Authors: Xiao, X.; Liu, R.; Zheng, Y.

Thermal-induced evolution of secondary phases in Cr-Mo-V low alloy steels
pp. 3425-3433(9)
Authors: Janovec, J.; Svoboda, M.; Kroupa, A.; Výrostková, A.

Temperature memory effect in two-way shape memory TiNi and TiNiCu springs
pp. 3435-3439(5)
Authors: Yu, H.; Wang, Z.; Zu, X.; Yang, S.; Wang, L.

Investigation on the connecting strength of Fe-Mn-Si-C shape memory alloy pipe coupling
pp. 3441-3443(3)
Authors: Dai, Pinqiang; Zhou, Lihua

Fabrication of bulk amorphous Fe₆₇Co_9.5Nd₃Dy_0.5B₂₀ alloy by hot extrusion of ribbon and study of the magnetic properties
pp. 3445-3450(6)
Authors: Biswas, K.; Ram, S.; Roth, S.; Schultz, L.; Eckert, J.

Study of transport properties of Ge_50−xSb_yTe_100+x−y thin film alloy
pp. 3451-3458(8)
Authors: Bahgat, A.; Mahmoud, E.; Abd Rabo, A.; Mahdy, I.

Effect of friction stir processing on mechanical and microstructural properties of AM60B Magnesium alloy
pp. 3459-3464(6)
Authors: Cavaliere, P.; Marco, P.

An electrochemical evaluation on the crevice corrosion of 430 stainless steel by micro capillary tubing method
pp. 3465-3471(7)
Author: Na, Eun-Young

Reduction of Ni²⁺ by hydrazine in solution for the preparation of nickel nano-particles
pp. 3473-3480(8)
Authors: Li, Zhiyu; Han, Chenghui; Shen, Jianyi

Effect of cooling rate on crystallization and magnetic properties of metallic Co₄₃Fe₂₀Ta_5.5B_31.5 glass
pp. 3481-3487(7)
Authors: Yuan, Zi-Zhou; Chena, Xue-Ding; Wang, Bing-Xia; Chen, Zi-Jiang

Hydrothermal synthesis and characterization of novel aloe-like SnS₂ nanostructures
pp. 3489-3492(4)
Authors: Zhu, Hongliang; Ji, Xin; Yang, Deren

Room and high temperature tensile behaviour of a P/M 2124/MoSi₂ composite at different heat treatment conditions
pp. 3493-3500(8)
Authors: Torres, B.; Lieblich, M.

Amorphous and nanograins in the bonding zone of explosive cladding
pp. 3501-3505(5)
Authors: Yang, Y.; Wang, B.; Xiong, J.

Representations about nature of processes occurring in the material at different stages of Bi(Pb)-Sr-Ca-Cu-O ceramic manufacture
pp. 3507-3520(14)
Author: Yurchenko, I.

Influence of iodine on the electrical properties of nickel phthalocyanines thin film devices
pp. 3521-3526(6)
Authors: Varghese, A.; Menon, C.

Photocatalytic activity of gallium nitride for producing hydrogen from water under light irradiation
pp. 3527-3534(8)
Authors: Kida, T.; Minami, Y.; Guan, G.; Nagano, M.; Akiyama, M.; Yoshida, A.

Low temperature synthesis and characterisation of lecontite, (NH₄)Na(SO₄)·2H₂0
pp. 3535-3539(5)
Authors: Kloprogge, J.; Broekmans, Maarten; Duong, Loc; Martens, Wayde; Hickey, Liesel; Frost1, Ray

The structural characterization and its influence on photoluminescence of lithium tetra-(8-hydroxy-quinolinato) Boron
pp. 3541-3546(6)
Authors: Chen, J.; Li, H.; Zhang, F.

Morphology and diameter controllable synthesis of boron nanowires
pp. 3547-3552(6)
Authors: Yang, Q.; Sha, J.; Wang, L.; Su, Z.; Ma, X.; Wang, J.; Yang, D.

Electrochemical synthesis and characterization of zinc selenide thin films
pp. 3553-3559(7)
Authors: Mahalingam, T.; Kathalingam, A.; Velumani, S.; Lee, Soonil; Sun, M.; Y. Deak, K.

Dielectric and piezoelectric properties of (0.97-x) Bi_1/2Na_1/2TiO₃-xBi_1/2K_1/2TiO₃-0.03NaNbO₃ ceramics
pp. 3561-3567(7)
Authors: Yuan, Ying; Zhang, Shuren; Liu, Jingsong

Optical properties of TlInS₂ layered single crystals near the absorption edge
pp. 3569-3572(4)
Authors: Qasrawi, A.; Gasanly, N.

Optical and structural properties of flash evaporated HgTe thin films
pp. 3573-3580(8)
Authors: El-Nahass, M.; Abd El-Salam, F.; Seyam, M.

Erratum
pp. 3581-3581(1)
Author: Clearfield, A.

List of Review Papers
pp. 3583-3583(1)