Journal of Materials Science

Contents by keyword
pp. vi-vii(2)

Mesophase AR pitch derived carbon foam: Effect of temperature, pressure and pressure release time
pp. 2743-2748(6)
Authors: Eksilioglu, A.; Gencay, N.; Yardim, M.; Ekinci, E.

Effects of supercooling and cooling rate on the microstructure of Cu–Co–Fe alloys
pp. 2749-2759(11)
Authors: Munitz, A.; Bamberger, A.; Wannaparhun, S.; Abbaschian, R.

Preparation of polyaniline dispersions with different assembly structure
pp. 2761-2766(6)
Authors: Xing, Shuangxi; Zhao, Chun; Jing, Shengyu; Wang, Zichen

Electrical properties of polymer/metal interface in polymer light-emitting devices: electron injection barrier suppression
pp. 2767-2770(4)
Authors: Olivati, C.; Carvalho, A.; Balogh, D.; Faria, R.

Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy
pp. 2771-2777(7)
Authors: Zhou, Caizhi; Yang, Xinqi; Luan, Guohong

Synthesis of multilayer Nano-ZrO₂ coated polystyrene spheres on fabrication of three-dimensional ordered macroporous structures
pp. 2779-2786(8)
Authors: Hotta, Yuji; Jia, Yu; Kawamura, Miharu; Omura, Naoki; Tsunekawa, Kiyoka; Sato, Kimiyasu; Watari, Koji

Impact behavior and microstructural characteristics of PVA fiber reinforced fly ash-geopolymer boards prepared by extrusion technique
pp. 2787-2794(8)
Authors: Yunsheng, Zhang; Wei, Sun; Zongjin, Li

Enhancement of the thermoelectric figure of merit in p- and n-type Cu/Bi-Te/Cu composites
pp. 2795-2803(9)
Authors: Yamashita, Osamu; Odahara, Hirotaka

Dielectric analysis of light-curing dental restorative materials—a pilot study
pp. 2805-2810(6)
Authors: Rosentritt, M.; Behr, M.; Knappe, S.; Handel, G.

Influence of Al₂O₃ addition on thermal and structural properties of erbium doped glasses
pp. 2811-2819(9)
Authors: Corradi, A.; Cannillo, V.; Montorsi, M.; Siligardi, C.

Phase formation in Mg-Sn-Zn alloys — thermodynamic calculations vs experimental verification
pp. 2821-2829(9)
Author: Bamberger, M.

Metal-electroceramic bonding in PZT through the selective application of laser energy
pp. 2831-2838(8)
Authors: Amin, Z.; Dalgarno, K. W.; Comyn, T. P.; Tavernor, A. W.

The nonlinear optical, magnetic, and Mössbauer spectral properties of some iron(III) doped silica xerogels
pp. 2839-2849(11)
Authors: Rebbouh, L.; Rosso, V.; Renotte, Y.; Lion, Y.; Grandjean, F.; Heinrichs, B.; Pirard, J.-P.; Delwiche, J.; Hubin-Franskin, M.-J.; Long, Gary

Synthesis of corrosion inhibitive poly(2,5-dimethylaniline) coatings on low carbon steel
pp. 2851-2858(8)
Authors: Shinde, Vandana; Sainkar, S.; Gangal, S.; Patil, P.

The study of optical properties of In₂O₃ and of mixed oxides In₂O₃−MoO₃ system deposited by coevaporation
pp. 2859-2867(9)
Authors: Anwar, M.; Ghauri, I.; Siddiqi, S.

Texture and morphology of pulse plated zinc electrodeposits
pp. 2869-2875(7)
Authors: Vasilakopoulos, D.; Bouroushian, M.; Spyrellis, N.

Effect of through-thickness compression on the microstructure of carbon fiber polymer-matrix composites, as studied by electrical resistance measurement
pp. 2877-2884(8)
Authors: Leong, Chia-Ken; Wang, Shoukai; Chung, D.

Fracture surface topography and fracture mechanism in austenitic SUS316 steel plates fatigued by repeated bending
pp. 2885-2893(9)
Authors: Tanaka, M.; Kimura, Y.; Taguchi, J.; Kato, R.

A study of surface fracture in paste extrusion using signal processing
pp. 2895-2906(12)
Authors: Russell, B.; Blackburn, S.; Wilson, D.

New polyimide-silica nano-composites from the sol-gel process using organically-modified silica network structure
pp. 2907-2914(8)
Authors: Al-Kandary, Sh.; Ali, A.; Ahmad, Z.

Influence of physico-structural properties on the photocatalytic activity of sol-gel derived TiO₂ thin films
pp. 2915-2927(13)
Authors: Fallet, M.; Permpoon, S.; Deschanvres, J.; Langlet, M.

Mechanical and barrier properties of epoxy polymer filled with nanolayered silicate clay particles
pp. 2929-2937(9)
Authors: Mohan, T.; Kumar, M.; Velmurugan, R.

Structure, properties and fracture of friction stir welds in a high-temperature Al-8.5Fe-1.3V–1.7Si alloy (AA-8009)
pp. 2939-2951(13)
Authors: Baeslack, W.; Jata, K.; Lienert, T.

Study of various strain energy distribution in InGaN/GaN multiple quantum wells
pp. 2953-2958(6)
Author: Lin, Yen-Sheng

Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay
pp. 2959-2964(6)
Authors: Ballav, N.; Sardar, P.; Ghosh, S.; Biswas, M.

Electrophoretic deposition of colloidal crystals assisted by hydrodynamic flows
pp. 2965-2969(5)
Authors: Yoldi, M.; González-ViñAs, W.; Arcos, M.; Sirera, R.

Effect of austenitizing temperature and cooling rate on the structure and properties of a ultrahigh strength low alloy steel
pp. 2971-2980(10)
Authors: Babu, N.; Suresh, M.; Sinha, P.; Sarma, D.

Precipitation behavior of Heusler phase (Ni₂AlHf) in multiphase NiAl alloy
pp. 2981-2987(7)
Authors: Cui, C.; Guo, J.; Ye, H.

Prediction of thermal coagulation by AC inductive heating of Mg_1-xCa_xFe₂O₄ ferrite powder
pp. 2989-2992(4)
Authors: Nomura, S.; Mukasa, S.; Miyoshi, T.; Okabe, N.; Maehara, T.; Aono, H.; Kikkawa, H.; Satou, K.; Yumi, S.; Watanabe, Y.

Electromechanical coupling properties of [001], [011] and [111] poled Pb(Mg_1/3Nb_2/3)O₃-0.32PbTiO₃ single crystals
pp. 2993-3000(8)
Authors: Wan, Q.; Chen, C.; Shen, Y.

Iron supported clay as catalysts for oxidation of cyclooctane
pp. 3001-3006(6)
Authors: Trakarnpruk, W.; Dumrongpong, P.

Microstructure, topology and X-ray diffraction in Ag-metal reinforced polymer of polyvinyl alcohol of thin laminates
pp. 3007-3016(10)
Authors: Gautam, A.; Tripathy, P.; Ram, S.

Templated synthesis of nanostructured europium-doped yttrium oxide thin films
pp. 3017-3025(9)
Authors: Ku, Anthony; Heward, William; Mani, Vanita

The effect of additives on the properties and microstructures of Al₂O₃-C refractories
pp. 3027-3032(6)
Authors: Khezrabadi, M. N.; Javadpour, J.; Rezaie, H.; Naghizadeh, R.

The coating of nickel compounds with copper compounds
pp. 3033-3039(7)
Authors: Haq, Ikram; Akhtar, Khalida

Effect of aluminum content on the passivation behavior of Fe–Al alloys in sulfuric acid solution
pp. 3041-3044(4)
Authors: Chiang, Wen-Chi; Luu, Wann-Chiun; Wu, Jiann-Kuo

A study of two refractories as mould materials for investment casting TiAl based alloys
pp. 3045-3049(5)
Authors: Jia, Q.; Cui, Y.; Yang, R.

Preparation of highly filled super-paramagnetic PMMA-magnetite nano composites using the solution method
pp. 3051-3056(6)
Authors: Banert, T.; Peuker, U.

Morphology, structures and properties of ZnO nanobelts fabricated by Zn-powder evaporation without catalyst at lower temperature
pp. 3057-3062(6)
Authors: Huang, Yunhua; He, Jian; Zhang, Yue; Dai, Ying; Gu, Yousong; Wang, Sen; Zhou, Cheng

The synergistic inhibition between hexadecyl trimethyl ammonium bromide (HTAB) and NaBr for the corrosion of cold rolled steel in 0.5 M sulfuric acid
pp. 3063-3069(7)
Authors: Tang, Libin; Li, Xueming; Mu, Guannan; Liu, Guangheng; Li, Lin; Liu, Hongcheng; Si, Yunsen

Carbonation process of alkali-activated slag mortars
pp. 3071-3082(12)
Authors: Puertas, F.; Palacios, M.; Vázquez, T.

Effects of Gd₂O₃ on structure and magnetic properties of Ni-Mn ferrite
pp. 3083-3087(5)
Authors: Zhao, Lijun; Yang, Hua; Yu, Lianxiang; Cui, Yuming; Feng, Shouhua

Enhancement of the thermoelectric power factor in Ag/Bi-Te/Ag composite devices
pp. 3089-3095(7)
Authors: Yamashita, Osamu; Odahara, Hirotaka; Satou, Kouji; Tomiyoshi, Shoichi

Synthesis and characterization of dense ultra-high temperature thermal protection materials produced by field activation through spark plasma sintering (SPS): I. Hafnium Diboride
pp. 3097-3104(8)
Authors: Anselmi-Tamburini, U.; Kodera, Y.; Gasch, M.; Unuvar, C.; Munir, Z.; Ohyanagi, M.; Johnson, S.

Nanoindentation of LaCrO₃ thin films
pp. 3105-3111(7)
Authors: Coratolo, Anthony; Orlovskaya, Nina; Lugovy, M.; Slyunyayev, V.; Dub, S.; Johnson, Christopher; Gemmen, Randall

Solidification behavior of Al–20.6%Cu alloy under AC magnetic field
pp. 3113-3115(3)
Authors: Ban, Chunyan; Cui, Jianzhong; Han, Yi; Ba, Qixian

Light diffusing polycarbonate—polycycloolefin blends
pp. 3117-3121(5)
Authors: Marek, Miroslav; Steidl, Josef

Dispersion of modified carbon nanotubes in 1-butyl-3-methyl imidazolium tetrafluoroborate
pp. 3123-3126(4)
Authors: Zhang, Suojiang; Zhang, Yanqiang; Zhang, Jianmin; Chen, Yuhuan; Li, Xian; Shi, Jiahua; Guo, Zhixin

Polymer-assisted synthesis of BaTiO₃ nanorods
pp. 3127-3130(4)
Authors: Wei, J.; Shi, J.; Liu, Z.; Wang, J.

The synthesis of polygonal Au by a facile route
pp. 3131-3133(3)
Authors: Zhang, Fei-Bao; Chen, Yuantao; Li, Mei-Wang Hu-Lin

Controlling crystal orientation in microporous titanosilicate ETS-4 films by secondary growth method
pp. 3135-3138(4)
Authors: Yilmaz, B.; Shattuck, K.; Warzywoda, J.; Sacco, A.

Photoluminescence properties of Eu²⁺-activated Sr₃SiO₅ phosphors
pp. 3139-3141(3)
Authors: Jee, Soon-Duk; Park, Joung; Lee, Sang-Hyuk

Polaron transport in n=3 Ruddlesden–Popper phase Sr₄Mn_1.5Fe_1.5O_9.72 ceramics
pp. 3143-3145(3)
Author: Jung, Woo-Hwan

Layer by layer self-assembly immobilization of glucose oxidase onto chitosan-graft-polyaniline polymers
pp. 3147-3149(3)
Authors: Xu, Xin; Ren, Guang; Cheng, Juan; Liu, Qiang; Li, Dong; Chen, Qiang

Vanadium-doped nanocrystalline TiO₂ layer prepared by spin coating pyrolysis
pp. 3151-3153(3)
Authors: Hwang, Kyu-Seog; Ahn, Jun-Hyung; Kim, Byung-Hoon

Effect of GeO₂ content on upconversion luminescence of Er³⁺-doped PbF₂-SiO₂-GeO₂ glasses
pp. 3155-3157(3)
Authors: Ma, Hongping; Xu, Shiqing

Synthesis of luminescent polyurethane with π-conjugated segment in main chain
pp. 3159-3162(4)
Authors: Zhang, Zhijian; Ma, Zhun; Xie, Shixiang; Zheng, Zhe; Xiao, Xuqiong; Wei, Wei; Huang, Wei

Thermal and chemical activation of fly-ash: Electrical response during early hydration
pp. 3163-3166(4)
Author: McCarter, W.

DSC investigation on WE43 and Elektron 21 Mg alloys
pp. 3167-3169(3)
Authors: Riontino, G.; Lussana, D.; Massazza, M.; Zanada, A.

Formation of nanorod-like structures through the thermal annealing of Cr films
pp. 3171-3173(3)
Authors: Kim, Hyoun; Myung, Ju; Lee, Chongmu

Studies on the morphology and the thermal properties of high-density polyethylene filled with graphite
pp. 3175-3178(4)
Authors: Dong, Qiqiong; Zheng, Qiang; Zhang, Mingqiu

New route for preparing BaTiO₃ nanometer powders
pp. 3179-3182(4)
Authors: Zhang, Yong; Luo, Shiting; Fu, Yang; Zhang, Keli

Necessity of verification of leakage currents using Sm doped Ceria electrolytes in SOFCs
pp. 3183-3184(2)
Author: Miyashita, T.

Improving the anode microstructure for SOFC with coprecipitated composite NiO/Ce_0.8Sm_0.2O_1.9 powder
pp. 3185-3187(3)
Authors: Li, Haibin; Xia, Changrong; Zhou, Zuoxing; Zhu, Minhui; Meng, Guangyao

Time evolution of In₂O₃ rod-like structures in metalorganic chemical vapor deposition process
pp. 3189-3191(3)
Authors: Kim, Hyoun; Kim, Nam; Shim, Seung; Myung, Ju

Auxetic behavior from rotating triangles
pp. 3193-3196(4)
Authors: Grima, Joseph; Evans, Kenneth

TEM and DSC studies on the synthetic diamond grown from Fe–Ni–C–B system under HPHT
pp. 3197-3200(4)
Authors: Gong, J.-H.; Li, M.-S.; Xu, B.; Yin, L.-W.; Liu, Y.-X.; Liu, H.-G.

Erratum
pp. 3201-3201(1)
Authors: Thozhur, S.; Crocombe, A.; Smith, P.; Cowley, K.; Mullier, M.

List of Review Papers
pp. 3203-3204(2)