Journal of Materials Science

Contents By Keyword
pp. v-v(1)

Soluble axially substituted phthalocyanines: Synthesis and nonlinear optical response
pp. 2169-2185(17)
Authors: Chen, Yu; Hanack, Michael; Blau, Werner; Dini, Danilo; Liu, Ying; Lin, Ying; Bai, Jinrui

Photocatalytic properties of the SBA-15 mesoporous silica molecular sieve modified with titanium
pp. 2187-2193(7)
Authors: Orlov, A.; Zhai, Q.-Z.; Klinowski, J.

Surface chemical analysis of tencel and cotton treated with a monochlorotriazinyl (MCT) β-cyclodextrin derivative
pp. 2195-2200(6)
Authors: Kistamah, N.; Carr, C.; Rosunee, S.

Sol-gel elaboration and characterization of YAG: Tb³⁺ powdered phosphors
pp. 2201-2209(9)
Authors: Potdevin, A.; Chadeyron, G.; Boyer, D.; Mahiou, R.

The effects of composition and thermal treatment on the magnetic properties of Fe_100-xCo_x nanowire arrays based on AAO templates
pp. 2211-2218(8)
Authors: Cao, Lin; Qiu, Xinping; Ding, Jingbo; Li, Hulin; Chen, Liquan

Effect of processing parameters and clay volume fraction on the mechanical properties of epoxy-clay nanocomposites
pp. 2219-2228(10)
Authors: Zunjarrao, S.; Sriraman, R.; Singh, R.

Effect of different types of nano-size oxide particulates on microstructural and mechanical properties of elemental Mg
pp. 2229-2236(8)
Authors: Hassan, S.; Gupta, M.

Influence of the annealing temperature on violet emission of ZnO films obtained by oxidation of Zn film on quartz glass
pp. 2237-2241(5)
Authors: Fan, X.; Lian, J.; Guo, Z.; Zhao, L.; Jiang, Q.

A general combustion approach to multipod ZnO and its characterization
pp. 2243-2248(6)
Authors: Zhao, Yu-Na; Cao, Mao-Sheng; Li, Jin-Gang; Chen, Yu-Jin

Investigation of high-temperature plastic deformation using instrumented microindentation tests. Part II: The deformation of Al-based particulate reinforced composites at 473 K to 833 K
pp. 2249-2258(10)
Authors: Bhakhri, V.; Klassen, R.

Investigation of high-temperature plastic deformation using instrumented microindentation tests. Part IThe deformation of three aluminum alloys at 473 K to 833 K
pp. 2259-2270(12)
Authors: Bhakhri, V.; Klassen, R.

Stearate intercalated layered double hydroxides: effect on the physical properties of dextrin-alginate films
pp. 2271-2279(9)
Authors: Landman, E.; Focke, W.

Method of sensing impact damage in carbon fiber polymer-matrix composite by electrical resistance measurement
pp. 2281-2289(9)
Authors: Wang, Shoukai; Wang, Daojun; Chung, D.; Chung, Jaycee

Mechanical properties of talc- and CaCO₃-reinforced high-crystallinity polypropylene composites
pp. 2291-2300(10)
Authors: Weon, J.-I.; Sue, H.-J.

Study of the austenite quantification by X-ray diffraction in the 18Ni-Co-Mo-Ti maraging 300 steel
pp. 2301-2307(7)
Authors: Pardal, J.; Tavares, S.; Cindra Fonseca, M.; Abreu, H.; Silva, J.

Experimental investigation and modeling of effective thermal conductivity and its temperature dependence in a carbon-based foam
pp. 2309-2317(9)
Authors: Grujicic, M.; Zhao, C.; Biggers, S.; Morgan, D.

Thermal evolution of ZnO-Bi₂O₃-Sb₂O₃ system in the region of interest for varistors
pp. 2319-2325(7)
Authors: Peiteado, M.; Rubia, M.; Fernández, J.; Caballero, A.

Photoconductivity in Thin Film of a-(Ge₂₀Se₈₀)_0.90Sn_0.10
pp. 2327-2332(6)
Authors: Thakur, A.; Sharma, V.; Chandel, P.; Goyal, N.; Saini, G.; Tripathi, S.

Effect of Pt/alumina catalyst preparation method on sensing performance of thermoelectric hydrogen sensor
pp. 2333-2338(6)
Authors: Choi, Y.; Tajima, K.; Shin, W.; Izu, N.; Matsubara, I.; Murayama, N.

Characterisation of an intermediate decay phenomenon of historical glasses
pp. 2339-2346(8)
Authors: Carmona, N.; Villegas, M.; Navarro, J.

Effects of melt temperature and mold preheating temperature on the fluidity of Ca containing AZ31 alloys
pp. 2347-2350(4)
Authors: Yim, C.; You, B.; Jang, R.; Lim, S.

Morphology and growth mechanism of single-helix spring-like carbon nanocoils with laces prepared using Ni/molecular sieve (Fe) catalyst
pp. 2351-2357(7)
Authors: Chen, X.; Takeuchi, K.; Yang, S.; Motojima, S.

Intermetallic compounds evolution between lead-free solder and cu-based lead frame alloys during isothermal aging
pp. 2359-2364(6)
Authors: Xia, Yanghua; Xie, Xiaoming; Lu, Chuanyan

An investigation on electrical properties of microwave treated natural ilmenite (FeTiO₃)
pp. 2365-2372(8)
Authors: Chiteme, C.; Mulaba-Bafubiandi, A.

EPS bead fusion effects on fold defect formation in lost foam casting of aluminum alloys
pp. 2373-2379(7)
Authors: Sands, M.; Shivkumar, S.

Effects of solution heat treatment on grain growth and degree of sensitization of AISI 321 austenitic stainless steel
pp. 2381-2386(6)
Authors: Sousa, Regina; Filho, José; Tanaka, Auro; Oliveira, Ayana; Ferreira, Wilman

Line narrowing effects and enhanced back scattering from ZnO colloids
pp. 2387-2391(5)
Authors: Krishnan, B.; Nampoori, V

Investigation of the influence of freeze-thaw processing on the properties of polyvinyl alcohol/polyacrylic acid complexes
pp. 2393-2404(12)
Authors: Nugent, M.; Higginbotham, C.

Doped lithium orthosilicate for absorption of carbon dioxide
pp. 2405-2409(5)
Authors: Gauer, C.; Heschel, W.

Study of the cytotoxicity of CCVD carbon nanotubes
pp. 2411-2416(6)
Authors: Flahaut, E.; Durrieu, M.; Remy-Zolghadri, M.; Bareille, R.; Baquey, Ch.

Electrical properties of Schottky diodes based on Carbazole
pp. 2417-2421(5)
Authors: Pisharady, Sreejith; Menon, C.; Sudarshanakumar, C.

Preparation of a polyurethane scaffold for tissue engineering made by a combination of salt leaching and freeze-drying of dioxane
pp. 2423-2428(6)
Authors: Heijkants, R.; Tienen, T.; Groot, J.; Pennings, A.; Buma, P.; Veth, R.; Schouten, A.

Fabrication and characterization of porous calcium polyphosphate scaffolds
pp. 2429-2434(6)
Authors: Qiu, K.; Wan, C.; Zhao, C.; Chen, X.; Tang, C.; Chen, Y.

Electronic structures of Mg₃Pn₂ (Pn=N, P, As, Sb and Bi) and Ca₃N₂ calculated by a first-principle pseudopotential method
pp. 2435-2441(7)
Authors: Imai, Y.; Watanabe, A.

Cellular SiC ceramic from stems of corn—processing and microstructure
pp. 2443-2448(6)
Authors: Bhattacharya, Anup; Heinrich, Jürgen

Stress relaxation in bending of AISI 316 at 773 K
pp. 2449-2455(7)
Authors: Povolo, F.; Mansilla, G.; Hermida, É.

Preparation of mesoporous TiO₂ by the sol-gel method assisted by surfactants
pp. 2457-2464(8)
Authors: Linacero, R.; Aguado-Serrano, J.; Rojas-Cervantes, M.

Synthesis and characterization of high surface area molybdenum nitride
pp. 2465-2470(6)
Authors: Panda, R.; Kaskel, S.

Structural and luminescent properties of cerium-ion doped barium borophosphates
pp. 2471-2475(5)
Authors: Lu, Chung-Hsin; Godbole, S.; Natarajan, V.

Crystallization kinetics in (AgSbTe)_x(In_1−ySb_y)_1−x films used in optical data storage
pp. 2477-2482(6)
Authors: Mongia, G.; Bhatnagar, P.

Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials. I. hemp fibres
pp. 2483-2496(14)
Authors: Mwaikambo, L.; Ansell, M.

Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials II. Sisal fibres
pp. 2497-2508(12)
Authors: Mwaikambo, L.; Ansell, M.

Perimeter analysis of the Von Koch island, application to the evolution of grain boundaries during heating
pp. 2509-2516(8)
Authors: Bigerelle, M.; Iost, A.

Thermoelectric power measurements of co-evaporated Cu/GeO₂ thin cermet films
pp. 2517-2519(3)
Author: Lucy, Irine

Apatite formation on rutile type TiO₂ films formed by laser irradiation
pp. 2521-2524(4)
Authors: Ghaith, E.-S.; Hayakawa, T.; Kasuga, T.; Nogami, M.

Experimental study of the Be–Si phase diagram
pp. 2525-2528(4)
Authors: Pan, Zhu; Du, Yong; Huang, Baiyun; Xu, Honghui; Liu, Yong; Chen, Hailin; Xiong, Wei; Schmid-Fetzer, R.

Effect of mechanical vibration on the microstructure and thermal fatigue behavior of cast hot work die steel
pp. 2529-2532(4)
Authors: Liang, Y.; Zhao, Y.; Qin, Q.; Shang, E.; Jiang, Q.

A low band gap silicon-containing polymer
pp. 2533-2535(3)
Authors: Yang, Mujie; Zhang, Qinghui; Li, Yang

Fabrication of transparent AlN ceramics
pp. 2537-2539(3)
Authors: Xiong, Yan; Fu, Zhengyi; Wang, Yucheng; Quan, Feng

Study on preparation and properties of carbon nanotubes/rubber composites
pp. 2541-2544(4)
Authors: Yue, Dongmei; Liu, Yunfang; Shen, Zengmin; Zhang, Liqun

Synthesis of polygonal Au by a facile route
pp. 2545-2546(2)
Authors: Zhang, Fei-Bao; Chen, Yuantao; LI, Mei-Wang

List of Review Papers
pp. 2547-2548(2)