Journal of Materials Science

Keyword contents
pp. iv-v(2)

Co-electrodeposition and Characterization of Cu (In, Ga)Se₂ thin films
pp. 1875-1878(4)
Authors: Donglin, Xia; Man, Xu; Jianzhuang, Li; Xiujian, Zhao

Assessment of wood load condition by Near Infrared (NIR) spectroscopy
pp. 1879-1886(8)
Authors: André, Nicolas; Labbé, Nicole; Rials, Timothy; Kelley, Stephen

Characteristics of brush plated ZnTe thin films
pp. 1887-1892(6)
Authors: Murali, K.; Ziaudeen, M.; Jayaprakash, N.

In-situ acidification of electrosterically dispersed alumina suspensions: Effect of coagulant structure
pp. 1893-1903(11)
Authors: Binner, Jon; Mcdermott, Andrew

Relationship between trapping density and open circuit voltage in multicrystalline silicon solar cells
pp. 1905-1909(5)
Authors: Wang, He; Yang, Hong; Wu, Hongcai; Yu, Huacong

Tribochemical interactions of piston ring coatings with molybdenum dithiocarbomate friction modifier
pp. 1911-1915(5)
Authors: Ruijun, Zhang; Shenghua, Li; Yuansheng, Jin

A study on the microstructural changes in hot rolling of dual-phase steels
pp. 1917-1925(9)
Authors: Salehi, A.; Serajzadeh, S.; Taheri, A.

Photoinduced non-linear optical effects in lanthanum calcium borate single crystals
pp. 1927-1932(6)
Authors: Reshak, Ali; Auluck, S.; Kityk, I.; Majchrowski, A.; Kasprowicz, D.; Drozdowski, M.; Kisielewski, J.; Lukasiewicz, T.; Michalski, E.

β-SiALON obtained from carbothermal reduction of kaolinite employing sample controlled reaction temperature (SCRT)
pp. 1933-1938(6)
Authors: Alcalá, M.; Criado, J.; Gotor, F.; Real, C.

Solution combustion synthesis of nano particle La_0.9Sr_0.1MnO₃ powder by a unique oxidant-fuel combination and its characterization
pp. 1939-1943(5)
Authors: Saha, S.; Ghanawat, S.; Purohit, R.

Effect of Mg content and solution treatment on the microstructure of Al-Si-Cu-Mg alloys
pp. 1945-1952(8)
Authors: Alfonso, Ismeli; Maldonado, Cuauhtemoc; Gonzalez, Gonzalo; Bedolla, Arnoldo

A new look at oxygen pumping characteristics of BICUVOX.1 solid electrolyte
pp. 1953-1957(5)
Authors: Paydar, M.; Hadian, A.; Fafilek, G.

Ex-cellulose carbon fibres with improved mechanical properties
pp. 1959-1964(6)
Authors: Plaisantin, H.; Pailler, R.; Guette, A.; Birot, M.; Pillot, J.-P.; Daude, G.; Olry, P.

Fabrication of semi-conductive ceramics by combination of gelcasting and reduction sintering
pp. 1965-1972(8)
Authors: Takahashi, Minoru; Adachi, Koichiro; Menchavez, Ruben; Fuji, Masayoshi

Preparation and characterization of polymer/inorganic nanoparticle composites through electron irradiation
pp. 1973-1978(6)
Authors: Wang, Z.; Zu, X.; Xiang, X.; Lian, J.; Wang, L.

Effect of degree of saponification on properties of films obtained from PVA/NaCl/H₂O system
pp. 1979-1982(4)
Authors: Iwaseya, M.; Katsuyama, N.; Yamaura, K.; Dai, L.-X.

Synthesis and characterization of poly (aniline-co-o-anisidine-co-o-toluidine) thin films in inorganic and organic supporting electrolytes
pp. 1983-1990(8)
Authors: Borole, D.; Kapadi, U.; Mahulikar, P.; Hundiwale, D.

Effect of NaBr on the corrosion of cold rolled steel in 1.0 M phosphoric acid
pp. 1991-1997(7)
Authors: Tang, Libin; Li, Xueming; Liu, Hongcheng; Mu, Guannan; Liu, Guangheng

A comparative analysis of copper and brass surface films in contact with tap water
pp. 1999-2007(9)
Authors: Valcarce, M.; Sánchez, S.; Vázquez, M.

Effects of calcium nitride and calcium carbonate gasifying agents on the combustion synthesis of Ni₃Ti-TiC composites
pp. 2009-2017(9)
Authors: Burkes, Douglas; Chun Yi, Hu; Gottoli, Guglielmo; Moore, John

Electrical and optical properties of Indium sesquitelluride (In₂Te₃) thin films
pp. 2019-2023(5)
Authors: Desai, R.; Lakshminarayana, D.; Patel, P.; Panchal, C.

Structural and surface propperties of Ni-Cu nanoparticles supported on SiO₂
pp. 2025-2030(6)
Authors: Boudjahem, A.-G.; Pietrowski, M.; Monteverdi, S.; Mercy, M.; Bettahar, Mohammed

Coating of bioactive glass 13-93 fibres with biomedical polymers
pp. 2031-2036(6)
Authors: Pirhonen, E.; Törmälä, P.

Electrical properties of flexible polypropylene based cable insulation materials
pp. 2037-2043(7)
Author: Chang, Fanggao

EPR and optical absorption studies of Cr³⁺ ions in alkaline earth alumino borate glasses
pp. 2045-2053(9)
Authors: Kumar, V.; Rao, J.; Gopal, N.

Study on electrorheological properties of novel polymer-Ce⁴⁺ complex
pp. 2055-2057(3)
Authors: Xinrong, Song; Yuanbin, Lin

Corrosion properties of plasma-sprayed Al₂O₃-TiO₂ coatings on Ti metal
pp. 2059-2065(7)
Authors: Song, Yo-Seung; Lee, In-Gyu; Hong, Shin; Kim, Bae-Yeon; Lee, Koo; Lee, Deuk

Preparation of nanocrystalline TiO₂ porous films from terpineol-ethanol-PEG system
pp. 2067-2073(7)
Authors: Bu, Shaojing; Jin, Zhengguo; Liu, Xiaoxin; Yin, Tao; Cheng, Zhijie

Lead-strontium titanate glass ceramics: I – crystallization and microstructure
pp. 2075-2085(11)
Authors: Sahu, Ashok; Kumar, Devendra; Parkash, Om

Lead-strontium titanate glass ceramics: II-dielectric behaviour
pp. 2087-2096(10)
Authors: Sahu, A.; Kumar, D.; Parkash, O.; Thakur, O.; Prakash, C.

Effect of nitrogen addition on the microstructure and mechanical behavior of 317L and 904L austenitic stainless steel welds
pp. 2097-2112(16)
Authors: Nage, Deepashri; Raja, V.; Raman, R.

An experimental technique to evaluate the effective thermal conductivity of Y₂O₃ stabilized ZrO₂ coatings
pp. 2113-2120(8)
Authors: An, K.; Han, M.

Damage and loading rate effects on the microfailure behaviour of Al₂O₃-ceramics studied by SEM
pp. 2121-2131(11)
Authors: Kytopoulos, V.; Papadopoulos, G.; Sadowski, T.

Effect of titanium ion implantation on the corrosion behavior of zircaloy-4
pp. 2133-2135(3)
Authors: Wan, Qian; Bai, Xinde; Liu, Xiaoyang

Synthesis and electronic behaviors of alternating indium—organic moiety binary hybrid copolymer
pp. 2137-2139(3)
Authors: Matsui, Hideo; Kudo, Ryouichi; Kimura, Miyuki; Yoshihara, Maskuni

Electrochemical synthesis of nanosized hydroxyapatite
pp. 2141-2144(4)
Authors: Montero, M.; Sáenz, A.; Rodríguez, J.; Arenas, J.; Castaño, V.

Infrared brazing of Ti-6Al-4V using the Ti-15Cu-15Ni braze alloy
pp. 2145-2150(6)
Authors: Chang, C.-T.; Shiue, R.-K.

Correlation of cavitation erosion resistance and mechanical properties of some engineering steels
pp. 2151-2153(3)
Authors: Wenge, Chen; Chenqing, Gu; Kang, Zhao; Fusan, Shen

Solid state-reaction between Ir and Al₂O₃
pp. 2155-2156(2)
Authors: Hua, Y.; Chen, Z.; Zhang, L.; Cheng, L.

Conductive percolation threshold of conductive-insulating granular composites
pp. 2157-2159(3)
Authors: Ren, L.; Tong, J.; Chen, D.; He, D.; Han, Z.; Li, J.

Preparation and growth mechanism of AlN whiskers by combustion synthesis with Y₂O₃ as additive
pp. 2161-2163(3)
Authors: Li, Wenkui; Zhang, Baolin; Zhuang, Hanrui; LI, Wenlan

Surface observation of LaNiO₃/MgO (100) structure
pp. 2165-2166(2)
Authors: Kim, B.; An, J.; Hwang, K.

List of Review Papers
pp. 2167-2168(2)