Journal of Materials Science

Contents By Keyword
pp. vi-vii(2)

Editorial
pp. 1297-1298(2)
Authors: Byrappa, K.; Yoshimura, M.

Soft solution processing: concept and realization of direct fabrication of shaped ceramics (nano-crystals, whiskers, films, and/or patterns) in solutions without post-firing
pp. 1299-1306(8)
Author: Yoshimura, M.

Historical developments of hydrothermal works in Japan, especially in ceramic science
pp. 1307-1318(12)
Author: Somiya, S.

Materials education and research in Japan, and Japan-India cooperative science program
pp. 1319-1323(5)
Author: Doyama, M.

In situ type study of hydrothermally prepared titanates and silicotitanates
pp. 1325-1333(9)
Authors: Clearfield, A.; Tripathi, A.; Medvedev, D.; Celestian, A.; Parise, J.

FTIR spectroscopic study on liquid silica solutions and nanoscale particle size determination
pp. 1335-1339(5)
Authors: Osswald, J.; Fehr, K.

Hydrothermal preparation of tailored hydroxyapatite
pp. 1341-1344(4)
Authors: Ioku, K.; Kawachi, G.; Sasaki, S.; Fujimori, H.; Goto, S.

Hydrothermal formation of magnesium oxysulfate whiskers in the presence of ethylenediaminetetraacetic acid
pp. 1345-1348(4)
Authors: Li, J.; Xiang, L.; Jin, Y.

Ag — Bearing Mica: Synthesis and Crystal Chemistry
pp. 1349-1353(5)
Authors: Thomas, V.; Smirnov, S.; Kozmenko, O.; Seryotkin, Yu.; Fursenko, D.; Pavlyuchenko, V.; Pospelova, L.

Impregnation of ZnO onto activated carbon under hydrothermal conditions and its photocatalytic properties
pp. 1355-1362(8)
Authors: Byrappa, K.; Subramani, A.; Ananda, S.; Rai, K.; Sunitha, M.; Basavalingu, B.; Soga, K.

Direct fabrication of anatase/activated carbon nano-hybrid materials by hydrothermal with ball milling method at low temperature
pp. 1363-1368(6)
Authors: Sakamoto, N.; Fujino, T.; Watanabe, T.; Yoshimura, M.

Hydrothermal preparation of neodymium oxide coated titania composite designer particulates and its application in the photocatalytic degradation of procion red dye
pp. 1369-1375(7)
Authors: Byrappa, K.; Sunitha, M.; Subramani, A.; Ananda, S.; Rai, K.; Basavalingu, B.; Yoshimura, M.

Thermovaporous synthesis of fine crystalline gahnite (ZnAl₂O₄)
pp. 1377-1383(7)
Authors: Ivakin, Yu.; Danchevskaya, M.; Ovchinnikova, O.; Muravieva, G.

Thermovaporous synthesis of complicated oxides
pp. 1385-1390(6)
Authors: Danchevskaya, M.; Ivakin, Yu.; Torbin, S.; Muravieva, G.; Ovchinnikova, O.

Synthesis of thioesters and thioamides under solvothermal condition using thiourea as thionating agent
pp. 1391-1393(3)
Authors: Aparna, E.; Rai, K.; Sureshbabu, M.; Jagadish, R.; Gaonkar, S.; Byrappa, K.

Synthesis and characterization of calcium aluminum silicate hydroxide (CASH) mineral
pp. 1395-1398(4)
Authors: Byrappa, K.; Devaraju, M.; Madhusudan, P.; Dayananda, A.; Kumar, B.; Girish, H.; Ananda, S.; Rai, K.; Javeri, P.

GaN single crystals grown on HVPE seeds in alkaline supercritical ammonia
pp. 1399-1407(9)
Authors: Callahan, M.; Wang, B.-G.; Rakes, K.; Bliss, D.; Bouthillette, L.; Suscavage, M.; Wang, S.-Q.

Modeling of ammonothermal growth of gallium nitride single crystals
pp. 1409-1414(6)
Authors: Chen, Q.-S.; Pendurti, S.; Prasad, V.

Crystal growth and morphology of Nd:YVO₄ under hydrothermal conditions
pp. 1415-1421(7)
Authors: Ramaningaiah, K.; Chandrashekar, C.; Lokanatharai, K.; Basavalingu, B.; Soga, K.

Hydrothermal synthesis and characterization of CsNiP and 2(LiZnHP₂O₇) crystals
pp. 1423-1427(5)
Authors: Gopalakrshna, G.; Mahesh, M.; Madhu, S.; Ashamanjari, K.; Shridhara, M.; Prasad, S.

Preparation and spectroscopy study of monodispersed metal oxide nanocrystals
pp. 1429-1431(3)
Authors: Pang, G.; Jin, H.; Li, Y.; Wan, Q.; Sun, Y.; Feng, S.; Gedanken, A.

Solvothermal synthesis of visible light responsive nitrogen-doped titania nanocrystals
pp. 1433-1438(6)
Authors: Sato, T.; Aita, Y.; Komatsu, M.; Yin, S.

Zinc oxide: hydrothermal growth of nano- and bulk crystals and their luminescent properties
pp. 1439-1444(6)
Authors: Dem'yanets, L.; Li, L.; Uvarova, T.

Supercritical hydrothermal synthesis of organic-inorganic hybrid nanoparticles
pp. 1445-1448(4)
Authors: Mousavand, T.; Takami, S.; Umetsu, M.; Ohara, S.; Adschiri, T.

Selectively hydrothermal and solvothermal growth of CdS nanospheres and nanorods: a facile way to tune finely optical properties
pp. 1449-1454(6)
Authors: Zhao, F.; Su, Q.; Xu, N.; Ding, C.; Wu, M.

Hydrothermal Synthesis of nanocrystalline powders of alkaline-earth hydroxyapatites, A₁₀(PO₄)₆(OH)₂ (A = Ca, Sr and Ba)
pp. 1455-1458(4)
Authors: Parhi, P.; Ramanan, A.; Ray, A.

Photoluminescence properties of nanocrystalline ZnS on nanoporous silicon
pp. 1459-1464(6)
Authors: Murugan, A.; Heng, Oh; Ravi, V.; Viswanath, Annamraju; Saaminathan, V.

Hydrothermal synthesis and characterization of micro to nano sized carbon particles
pp. 1465-1469(5)
Authors: Basavalingu, B.; Byrappa, K.; Yoshimura, M.; Madhusudan, P.; Dayananda, A.

Microwave hydrothermal synthesis of nanosize Ta₂O₅ added Mg-Cu-Zn ferrites
pp. 1471-1474(4)
Authors: Krishnaveni, T.; Murthy, S.; Gao, F.; Lu, Q.; Komarneni, S.

Microwave hydrothermal synthesis of nanosize PbO added Mg-Cu-Zn ferrites
pp. 1475-1479(5)
Authors: Raju, V.; Murthy, S.; Gao, F.; Lu, Q.; Komarneni, S.

Microwave-assisted hydrothermal synthesis of zeolite films on ceramic supports
pp. 1481-1487(7)
Authors: Madhusoodana, C.; Das, R.; Kameshima, Y.; Okada, K.

Solvothermal treatment of starch for the production of glucose and maltooligosaccharides
pp. 1489-1494(6)
Authors: Miyazawa, T.; Ohtsu, S.; Nakagawa, Y.; Funazukuri, T.

Hydrothermal conversion of biomass into acetic acid
pp. 1495-1500(6)
Authors: Jin, F.; Zhou, Z.; Kishita, A.; Enomoto, H.

A continuous flow reaction system for producing acetic acid by wet oxidation of biomass waste
pp. 1501-1507(7)
Authors: Zhou, Z.; Jin, F.; Enomoto, H.; Moriya, T.; Higashigima, H.

Reactions of polymers in supercritical fluids for chemical recycling of waste plastics
pp. 1509-1515(7)
Authors: Goto, M.; Sasaki, M.; Hirose, T.

Decomposition of acetamide and formamide in pressurized hot water
pp. 1517-1521(5)
Authors: Okazaki, M.; Funazukuri, T.

Iron at earth-core conditions
pp. 1523-1527(5)
Authors: Modak, P.; Verma, A.; Rao, R.; Godwal, B.; Jeanloz, R.

Chemical potential diagrams—a window to understand alkali metasomatism of natural rocks
pp. 1529-1530(2)
Authors: Sengupta, P.; Kale, G.

Hydrothermal treatment of effluent affected polluted soil of Nanjangud, Mysore district, India
pp. 1531-1534(4)
Authors: Byrappa, K.; Kousalya, S.; Kumar, B.; Tonthai, T.

Preparation of complex oxide thin films under hydrothermal and hydrothermal-electrochemical conditions
pp. 1535-1540(6)
Authors: Kajiyoshi, K.; Yanagisawa, K.; Feng, Q.; Yoshimura, M.

Solution synthesis of crystallized AMO₄ (A=Ba, Sr, Ca; M=W, Mo) film at room temperature
pp. 1541-1546(6)
Authors: Dinesh, R.; Fujiwara, T.; Watanabe, T.; Byrappa, K.; Yoshimura, M.

High-pressure phase equilibria in binary and ternary mixtures with one near- or supercritical and one high-molecular component. New insights for application and theory
pp. 1547-1556(10)
Authors: Kraska, T.; Tuma, D.

Forming conditions for Au-Sb and Ag-Sb ore according to thermodynamic modeling data
pp. 1557-1562(6)
Authors: Pavlova, G.; Gushchina, L.; Borovikov, A.; Borisenko, A.; Palyanova, G.

Cluster-precursors for structure formation of Alkali Zirconosilicates in the Systems AOH-ZrO₂-SiO₂-H₂O (A = Li-Cs): algorithm for their identification and self-assembling modeling
pp. 1563-1569(7)
Author: Ilyushin, G.

Effect of O₂ on copper-water vapor interaction near critical point
pp. 1571-1577(7)
Authors: Jin, Y.; Kato, H.; Korablova, I.; Ioku, K.; Yamasaki, N.

Solidification of coal fly ash using hydrothermal processing method
pp. 1579-1584(6)
Authors: Jing, Z.; Matsuoka, N.; Jin, F.; Yamasaki, N.; Suzuki, K.; Hashida, T.

CO₂ reduction using hydrothermal method for the selective formation of organic compounds
pp. 1585-1589(5)
Authors: Takahashi, H.; Liu, L.; Yashiro, Y.; Ioku, K.; Bignall, G.; Yamasaki, N.; Kori, T.

Wet oxidation of lignin model compounds and acetic acid production
pp. 1591-1597(7)
Authors: Suzuki, H.; Cao, J.; Jin, F.; Kishita, A.; Enomoto, H.; Moriya, T.

Hydrothermal dynamics on environmental problems using the aspect of earth science
pp. 1599-1604(6)
Authors: Yamasaki, N.; Yamasaki, Y.; Tohji, K.; Tsuchiya, N.; Hashida, T.; Ioku, K.

Patterning of fine particles by means of supercritical CO₂
pp. 1605-1610(6)
Authors: Huang, J.; Moriyoshi, T.; Manabe, H.

Towards a Green Synthesis of LAB's: Effect of Rare Earth Metal Ions on the Benzene Alkylation with 1-Dodecene over NaFAU-Y Zeolites
pp. 1611-1616(6)
Authors: Thomas, Bejoy; Despandey, U.; Sugunan, S.

Thermal characterization of materials at high pressures
pp. 1617-1621(5)
Authors: Ramesh, T.; Shubha, V.

X-ray and ion emission characteristics of plasmas ablated from solid materials using a high power Nd:Glass laser
pp. 1623-1630(8)
Authors: Dhareshwar, L.; Chaurasia, S.; Murali, C.; Gupta, N.; Godwal, B.

Effect of ZnO addition on the electrical resistance of 2.6 mol%-Y₂O₃ stabilized zirconia ceramic
pp. 1631-1633(3)
Authors: Nakayama, Susumu; Kakita, Shinichi; Masuda, Yasuo; Suzuki, Toshihisa

Nonlinear electrical properties and stability of Zn-Pr-Co-Er-M (M = Ni, Mg, Cr) oxide-based varistors
pp. 1635-1638(4)
Author: Nahm, Choon

Study on modification of epoxy resins with acrylate liquid rubber containing pendant epoxy groups
pp. 1639-1641(3)
Authors: Kong, Jie; Ning, Rongchang; Tang, Yusheng

Combined Rietveld refinement of CaMgSi₂O₆:Eu²⁺ using X-ray and neutron powder diffraction data
pp. 1643-1647(5)
Authors: Kim, Yong-Il; Im, Won; Jeon, Duk

Thermal stability and magnetic properties of FeSiB amorphous alloy
pp. 1649-1651(3)
Authors: Nunes, E.; Pereira, R.; Freitas, J.; Passamani, E.; Larica, C.; Fernandes, A.; Sanchez, F.

Visualization of polyethylene fibers surface restructuring induced by oxygen plasma
pp. 1653-1657(5)
Authors: Intrater, R.; Hoffman, A.; Lempert, G.; Gouzman, I.; Cohen, Y.; Grossman, E.

Elaboration and characterization of MOCVD (Bi_1-x Sb_x)₂ Te₃ thin films
pp. 1659-1662(4)
Authors: Mzerd, A.; Aboulfarah, B.; Giani, A.; Boyer, A.

Fabrication of TiC_p/Mg composites by powder metallurgy
pp. 1663-1666(4)
Authors: Xiu, K.; Jiang, Q.; Ma, B.; Wang, Y.; Sui, H.; Shang, E.

Electrical properties of some copper-containing phosphate glasses
pp. 1667-1669(3)
Authors: Ahmed, M.; Salman, F.; Morsi, M.; El-Badry, K.; Metwall, E.

Bioactive NiTi shape memory alloy fabricated by oxidizing in H₂O₂ solution and subsequent NaOH treatment
pp. 1671-1674(4)
Authors: Chu, C.; Chung, C.

Studies on reactivity in the solid state between some rare-earth metal oxides Ln₂O₃ where Ln=Y, La, Nd, Sm, Eu, Gd, Dy, Ho, Er, Lu and metal sulfates(VI) MSO₄ where M=Ni, Cu, Zn, Cd
pp. 1675-1680(6)
Author: Tomaszewicz, E.

List of Review Papers
pp. 1681-1682(2)