Journal of Materials Science

Contents By Keyword
pp. iv-v(2)

Mechanical properties of aerogel composites for casting purposes
pp. 1019-1024(6)
Authors: Ratke, Lorenz; Brück, Sabine

Investigation of the size effect on optical properties of polycrystalline Ge deposition by pulse laser deposition
pp. 1025-1028(4)
Authors: Ma, Xiying; Shi, Weilin

Synthesis and characterization of coprecipitation-derived ferrimagnetic glass-ceramic
pp. 1029-1037(9)
Authors: Bretcanu, O.; Spriano, S.; Vitale, C.; Verné, E.

A study of precipitation and recrystallization behaviour of aluminium alloy AA1235
pp. 1039-1045(7)
Authors: Roy, R.; Kar, S.; Das, K.; Das, S.

Cracking in and around the thermally grown oxide in thermal barrier coatings: A comparison of isothermal and cyclic oxidation
pp. 1047-1058(12)
Authors: Echsler, H.; Shemet, V.; Schütze, M.; Singheiser, L.; Quadakkers, W.

Study of artificial aging in AlMgSi (6061) and AlMgSiCu (6013) alloys by Positron Annihilation
pp. 1059-1066(8)
Authors: Staab, T.; Krause-Rehberg, R.; Hornauer, U.; Zschech, E.

Electrical properties of vacuum evaporated PbSnS₃ thin films
pp. 1067-1071(5)
Authors: Kuku, T.; Azi, S.; Osasona, O.

Spray processing and wear characteristics of Al-Cu-Al₂O₃-Pb based composites
pp. 1073-1080(8)
Authors: Anil, M.; Ojha, S.

Evaluation of material degradation of 1Cr-1Mo-0.25V steel by ball indentation and resistivity
pp. 1081-1087(7)
Authors: Seok, Chang-Sung; Koo, Jae-Mean

Electrical mixing laws for composites with conducting and insulating discs by impedance spectroscopy
pp. 1089-1096(8)
Authors: Wansom, S.; Woo, L.; Hoke, S.; Mason, T.

Mechanical strength and electrical conductivity of Ni-YSZ cermets fabricated by viscous processing
pp. 1097-1107(11)
Authors: Grahl-Madsen, Laila; Larsen, Peter; Bonanos, Nikolaos; Engell, John; Linderoth, Søren

Structural characteristics and mechanical behaviour of beard hair
pp. 1109-1121(13)
Authors: Thozhur, S.; Crocombe, A.; Smith, P.; Cowley, K.; Mullier, N.

Oxidation behavior of the TiNi shape memory alloy with a laser surface melted layer
pp. 1123-1129(7)
Authors: Xu, C.; Shi, S.; Man, H.; Woo, C.; Surya, C.

Sol-gel synthesis and characterization of the photocatalyst BaCo_1/3Nb_2/3O₃
pp. 1131-1135(5)
Authors: Yin, Jiang; Zou, Zhigang; Ye, Jinhua

The electric behavior of a lithium-niobate-phosphate glass and glass-ceramics
pp. 1137-1144(8)
Authors: Graça, M.; Valente, M.; Ferreira Da Silva, M.

Substantiating the role of phase bicontinuity and interfacial bonding in epoxy-silica nanocomposites
pp. 1145-1155(11)
Authors: Mascia, Leno; Prezzi, Luca; Haworth, Barry

Comparison of microwave-induced combustion and solid-state reaction method for synthesis of LiMn_2−xCo_xO₄ powders and their electrochemical properties
pp. 1157-1164(8)
Authors: Fu, Yen-Pei; Su, Yu-Hsiu; Lin, Cheng-Hsiung; Wu, She-Huang

Effect of prior cold work on age hardening of Cu-4Ti-1Cd alloy
pp. 1165-1174(10)
Authors: Markandeya, R.; Nagarjuna, S.; Sarma, D.

Solid state joining of steel-Cu P/M preform tubes: use of interlayer and post joining heat treatments
pp. 1175-1185(11)
Authors: Krishna, B.; Venugopal, P.; Prasad Rao, K.

Molten salt syntheses of alkali metal titanates
pp. 1187-1195(9)
Author: Afanasiev, P.

A study of copper stoichiometry and phase relationships in the copper-zirconium phosphate system: CuZr₂(PO₄)₃ – Cu_0.5Zr₂(PO₄)₃
pp. 1197-1205(9)
Authors: Christiansen, R.; Warner, T.

Novel basalt fibre reinforced glass matrix composites
pp. 1207-1211(5)
Authors: Bernardo, E.; Stoll, E.; Boccaccini, A.

Dispersion and rheology of nickel nanoparticle inks
pp. 1213-1219(7)
Authors: Tseng, Wenjea; Chen, Chun-Nan

Thermo-elastic properties of dense YSZ and porous Ni-ZrO₂ monolithic and isotropic materials
pp. 1221-1232(12)
Authors: Gadag, Shiva; Subbarayan, Ganesh; Barker, William

Thermal cycles effects on interlaminar shear strength (ILSS) and impact behaviour of carbon/PEI composites
pp. 1233-1241(9)
Authors: Sinmazçelİk, Tamer; Armağan Arici, A.

Effect of solvents on adsorption of phenolic resin onto γ-aminopropyl-triethoxysilane treated silica fiber during resin transfer molding
pp. 1243-1246(4)
Authors: Wang, Baichen; Huang, Yudong; Liu, Li

Correlation between Poisson's ratio and porosity in porous materials
pp. 1247-1249(3)
Authors: Kováčik, J.

Novel test to evaluate the bond strength of a luting cement
pp. 1251-1253(3)
Authors: Rushe, N.; Towler, M.

Post-impact flexural tests on jute/polyester laminates monitored by acoustic emission
pp. 1255-1259(5)
Author: Santulli, Carlo

Adhesion of glass to steel using a geopolymer
pp. 1261-1264(4)
Authors: Latella, B.; Perera, D.; Escott, T.; Cassidy, D.

Reactive extrusion and high-temperature oxidation of Ni₃Al
pp. 1265-1268(4)
Authors: Morsi, K.; Moussa, S.; Wall, James

Chemical preparation and photoluminescence of partially MgO-substituted ZnO powders
pp. 1269-1271(3)
Authors: Inoue, K.; Shoyama, M.; Murayama, M.; Torii, Y.

Microstructure and nonlinear electrical characteristics of SnO₂·CuO·Nb₂O₅ system
pp. 1273-1275(3)
Authors: Wang, Chun-Ming; Wang, Jin-Feng; Su, Wen-Bin; Zang, Guo-Zhong; Qi, Peng

Impact test deformations of polypropylene foam samples followed by microtomography
pp. 1277-1279(3)
Authors: Viot, Philippe; Bernard, Dominique

Preparation and microwave dielectric properties of a new A₄B₃O₁₂-type cation-deficient perovskite BaLa₃Ti₂NbO₁₂
pp. 1281-1284(4)
Authors: Fang, L.; Liu, Hong-Fei; Zhang, Hui; Liu, Zai-Quan

PLuminescence properties of Er³⁺ doped SiO₂-ZrO₂ prepared using Er–Zr double alkoxide
pp. 1285-1287(3)
Authors: Lim, Mi; Athar, Taimur; Seok, Sang; Chung, Woon; Ju, Jung-Jin; Lee, Myung-Hyun; Hong, Seok

Improvement of chemical stability of polymer electrolyte fuel cell membranes by grafting of new substituted styrene monomers into ETFE films
pp. 1289-1292(4)
Authors: Chen, Jinhua; Asano, Masaharu; Yamaki, Tetsuya; Yoshida, Masaru

The effect of silica nano particles and rubber particles on the toughness of multiphase thermosetting epoxy polymers
pp. 1293-1293(1)
Authors: Kinloch, A.; Mohammed, R.; Taylor, A.; Eger, C.; Sprenger, S.; Egan, D.

List of Review Papers
pp. 1295-1296(2)