Journal of Materials Science

Contents by Keyword
pp. iv-iv(1)

Foreword: Mechanical behaviour of cellular solids
pp. 5791-5791(1)
Authors: Ganghoffer, Jean-Francois; Onck, Patrick

Potential applications for steel and titanium metal foams
pp. 5793-5799(7)
Authors: Salimon, A.; Bréchet, Y.; Ashby, M.; Greer, A.

Investigation on the influence of cell shape anisotropy on the mechanical performance of closed cell aluminium foams using micro-computed tomography
pp. 5801-5811(11)
Authors: Benouali, A.-H.; Froyen, L.; Dillard, T.; Forest, S.; N’guyen, F.

Fracture and microstructure of open cell aluminum foam
pp. 5813-5819(7)
Authors: Amsterdam, E.; Onck, P. R.; De Hosson, J. Th. M.

Fracture of open- and closed-cell metal foams
pp. 5821-5828(8)
Authors: Onck, P.; Merkerk, R.; Raaijmakers, A.; Hosson, J.

Polymeric foam behavior under dynamic compressive loading
pp. 5829-5837(9)
Authors: Viot, P.; Beani, F.; Lataillade, J.-L.

Strain-energy based homogenisation of two- and three-dimensional hyperelastic solid foams
pp. 5839-5844(6)
Authors: Demiray, Serkan; Becker, Wilfried; Hohe, JÖrg

The wet Kelvin model for air flow through open-cell polyurethane foams
pp. 5845-5851(7)
Author: Mills, N. J.

On interactions between imperfections in cellular solids
pp. 5853-5857(5)
Author: Grenestedt, J.

Finite element modeling concepts and linear analyses of 3D regular open cell structures
pp. 5859-5866(8)
Authors: Luxner, Mathias; Stampfl, Juergen; Pettermann, Heinz

Mechanical properties of bread crumbs from tomography based Finite Element simulations
pp. 5867-5873(7)
Authors: Babin, P.; Valle, G.; Dendievel, R.; Lassoued, N.; Salvo, L.

Numerical prediction of the foam structure of polymeric materials by direct 3D simulation of their expansion by chemical reaction based on a multidomain method
pp. 5875-5881(7)
Authors: Bikard, J.; Bruchon, J.; Coupez, T.; Vergnes, B.

Overall ultimate yield surface of periodic tetrakaidecahedral lattice with non-symmetric material distribution
pp. 5883-5892(10)
Authors: Florence, Céline; Sab, Karam

Effect of structure on the creep of open-cell nickel foams
pp. 5893-5901(9)
Authors: ZUROB, H.; Bréchet, Y.

Continuum modeling of strain localization phenomena in metallic foams
pp. 5903-5910(8)
Authors: Forest, S.; Blazy, J.-S.; Chastel, Y.; Moussy, F.

Size effects in the mechanical behavior of cellular materials
pp. 5911-5917(7)
Authors: Tekoglu, C.; Onck, P.

An anisotropic damage model of foams on the basis of a micromechanical description
pp. 5919-5924(6)
Authors: Diebels, Stefan; Ebinger, Tobias; Steeb, Holger

Mesoscopic fabric models using a discrete mass-spring approach: Yarn-yarn interactions analysis
pp. 5925-5932(8)
Authors: Boubaker, Bilel; Haussy, Bernard; Ganghoffer, Jean-Francois

Finite element modelling of rubber-like materials — a comparison between simulation and experiment
pp. 5933-5939(7)
Authors: Böl, M.; Reese, S.

Numerical simulation of entangled materials mechanical properties
pp. 5941-5948(8)
Author: Durville, Damien

Strain heterogeneities and local anisotropy in crimped glass wool
pp. 5949-5954(6)
Authors: Bergonnier, Sandra; Hild, François; Rieunier, Jean-Baptiste; Roux, Stéphane

Analysis of the mechanical behavior of woven fibrous material using virtual tests at the unit cell level
pp. 5955-5962(8)
Authors: Boisse, Philippe; Gasser, Alain; Hagege, Benjamin; Billoet, Jean-Louis

Experimental data about mechanical behaviour during compression tests for various matted fibres
pp. 5963-5970(8)
Authors: Poquillon, D.; Viguier, B.; Andrieu, E.

Sputtering power and deposition pressure effects on the electrical and structural properties of copper thin films
pp. 5971-5981(11)
Authors: Chan, Kah-Yoong; Teo, Bee-San

On the inherent fracture mode of iridium at room temperature
pp. 5983-5987(5)
Author: Panfilov, Peter

Synthesis-microstructure-mechanical properties-wear and corrosion behavior of an Al-Si (12%)—Flyash metal matrix composite
pp. 5989-5997(9)
Authors: Ramachandra, M.; Radhakrishna, K.

The effect of grain size on the flow stress determined from spherical microindentation of die-cast magnesium AM60B alloy
pp. 5999-6005(7)
Authors: Weiler, J. P.; Wood, J. T.; Klassen, R. J.; Berkmortel, R.; Wang, G.

A novel approach for preparation of Zn₂SiO₄:Tb nanoparticles by sol-gel-microwave heating
pp. 6007-6010(4)
Authors: Yang, Hongmei; Shi, Jianxin; Gong, Menglian

Morphology and structure of airborne β-SiC fibres produced during the industrial production of non-fibrous silicon carbide
pp. 6011-6017(7)
Authors: Gunnæs, A.; Olsen, A.; Skogstad, A.; Bye, E.

Experimental investigation of the Nb-Ni phase diagram
pp. 6019-6022(4)
Authors: Chen, Hailin; Du, Yong; Xu, Honghui; Liu, Yong; Schuster, J.

The magnetic properties of martensitic phase in Fe-Ni-Mn alloys: Mössbauer spectroscopy observation
pp. 6023-6026(4)
Authors: Akturk, S.; Durlu, T.

Empirical equation about open circuit voltage in SOFC
pp. 6027-6027(1)
Author: Miyashita, T.

Cation vacancies in doped zirconolite (CaZrTi₂O₇)
pp. 6029-6032(4)
Authors: Hadley, J.; Hsu, F.; Vance, E.; Colella, M.; Smith, K.; Lumpkin, G.; Carter, M.; Begg, B.

Preparation of Si–C–O–N ceramic fibers from polycarbosilane
pp. 6033-6036(4)
Authors: Xiaolin, Fan; Wei, Liu; Xiuguo, Lu; Chunxiang, Feng; Yongcai, Song

Unidirectional alignment of Carbon nano-sized fiber using drawing process
pp. 6037-6039(3)
Authors: Baik, Youngmin; Lee, Sangkwan; Jang, Younghwan; Kim, Sangshik

Effect of the ceramic mould composition on the surface quality of As-cast titanium alloy
pp. 6041-6043(3)
Authors: Cruz, R.; Sayeg, I.; Mutarelli, P.; Pinedo, C.

Mechanical working of 2124 Al alloy—SiC_p cast composites
pp. 6045-6048(4)
Authors: Sinha, I.; De, P.; Srivastava, V.

Thermo-mechanical fatigue behavior of Ti-6-22-22 alloy
pp. 6049-6052(4)
Authors: Yu, Z.; Li, S.; Liu, Y.; Lei, J.

Review papers in Journal of Materials Science Volumes 39 and 40
pp. 6053-6053(1)