Journal of Materials Science

Contents by Keyword
pp. iv

Introduction to a special issue of the journal of materials science dedicated to Robert W. Cahn
pp. 3861-3861(1)
Author: Chan, Helen M.

R. W. Cahn—Historian
pp. 3863-3864(2)
Author: Westbrook, J. H.

Dynamical recovery
pp. 3865-3870(6)
Author: Cottrell, A.

The influence of crystal anisotropy on mechanical behaviour
pp. 3871-3875(5)
Author: Greenwood, G. W.

Looking into details of atom kinetics in intermetallics
pp. 3877-3887(11)
Authors: Pfeiler, W.; Püschl, W.; Podloucky, R.

Influence of residual stresses in the performance of cold-drawn pearlitic wires
pp. 3889-3899(11)
Author: Elices, M.

Fission tracks in solids—production mechanisms and natural origins
pp. 3901-3911(11)
Author: Fleischer, Robert L.

Reliability of the diffusion-multiple approach for phase diagram mapping
pp. 3913-3925(13)
Author: Zhao, J.-C.

Devitrification of Al-Ni-Rare earth amorphous alloys
pp. 3927-3934(8)
Authors: Battezzati, L.; Kusy', M.; Rizzi, P.; Ronto', V.

Alloy and process development of TiAl
pp. 3935-3940(6)
Authors: Wu, Xinhua; Hu, D.; Loretto, M. H.

Magnetic properties and thermal stability of CoFeNi-based amorphous films
pp. 3941-3947(7)
Authors: Käufler, A.; Luo, Y.; Samwer, K.

Carbon–carbon interactions in iron
pp. 3949-3955(7)
Author: Bhadeshia, H. K. D. H.

First principles study of effect of lattice misfit on the bonding strength of Ni/Ni₃Al interface
pp. 3957-3963(7)
Authors: Peng, P.; Jin, Z. H.; Yang, R.; Hu, Z. Q.

Role of minor alloying additions in formation of bulk metallic glasses: A Review
pp. 3965-3974(10)
Authors: Lu, Z. P.; Liu, C. T.

A review of directionally solidified intermetallic composites for high-temperature structural applications
pp. 3975-3984(10)
Authors: Bei, H.; Pharr, G. M.; George, E. P.

Metastable microstructures in rapidly solidified zirconium alloys
pp. 3985-3998(14)
Authors: Banerjee, S.; Dey, G. K.

Announcement
pp. 3999-3999(1)

Novel battery using conducting polymers: Polyindole and polyaniline as active materials
pp. 4001-4003(3)
Authors: Cai, Zhijiang; Geng, Mingming; Tang, Zhiyuan

Electrical properties of Bi_3.15Sm_0.85Ti₃O₁₂ thin films on Si for a metal-ferroelectric-semiconductor-metal structure
pp. 4005-4007(3)
Authors: Liu, W. L.; Xia, H. R.; Han, H.; Wang, X. Q.

Grain-size dependent austenite–ferrite phase transformation behavior in pure iron
pp. 4009-4011(3)
Author: Liu, Y. C.

Plate model to evaluate interfacial adhesion of anisotropy thin film in CSN test
pp. 4013-4016(4)
Authors: Zheng, Xuejun; Deng, S. F.; Zhou, Yichun; Tan, Xin; Jiang, Peng

Optical properties of Rh6G:C337 dye mixture in the sol-gel silica matrix
pp. 4017-4019(3)
Authors: Choi, Dae Wook; Lim, Chun Woo; Sohn, Sang Ho

Geothermal waste: An alternative replacement material of portland cement
pp. 4021-4025(5)
Authors: Gómez-Zamorano, L. Y.; Escalante-García, J. I.; Mendoza-Suárez, G.

Influence of Zn doping on the optical properties of KLN single crystal
pp. 4027-4029(3)
Authors: Guo, Y. J.; Xu, Y. H.; Yang, C. H.

Novel coating technique for preparation of hydroxyapatite/Ti composite
pp. 4031-4034(4)
Authors: Liu, Yong; Dan, Xiaohong; Du, Yong; Liu, Fang

Effect of aging temperature on CeO₂ formation in homogeneous precipitation
pp. 4035-4036(2)
Author: Ozawa, M.

Phase diagram on the system SnO₂–V₂O₅–MoO₃
pp. 4037-4038(2)
Authors: Ivanova, Y.; Gattef, E.

New zirconium hydroxide
pp. 4039-4043(5)
Authors: Guo, G. Y.; Chen, Y. L.

Effect of drying rate on mesoporous silica morphology templated from PEO-PPO-PEO block copolymer assemblies
pp. 4045-4047(3)
Authors: Pei, L.; Kurumada, K.-I.; Tanigaki, M.; Hiro, M.; Susa, K.

Influence of heat treatment on toughening of polyehtylene-octene copolymer (POE)/poly(ethylene terephthalate) (PET) blends
pp. 4049-4051(3)
Authors: Jun, Chen; wei, Yang; Zhengying, Liu; Rui, Huang

High photoconductivity properties of perylene polyimide containing triarylamine unit
pp. 4053-4056(4)
Authors: Niu, Haijun; Wang, Cheng; Bai, Xu Duo; Huang, Yudong

Preparation and characterization of YBa₂Cu₃O_7-x superconductor by means of a novel method combining sol–gel and combustion synthesis techniques
pp. 4057-4061(5)
Authors: Peng, Cheng-Hsiung; Hwang, Chyi-Ching; Hong, Ching-Kai; Chen, San-Yuan

Electrodeposition and mechanical properties of Ni–La₂O₃ nanocomposites
pp. 4063-4066(4)
Authors: Xue, Yu-Jun; Zhu, Di; Zhao, Fei

Electrostatic assisted formation of porous ceramic film
pp. 4067-4068(2)
Authors: Li, G.; Takashima, K.; Katsura, S.; Mizuno, A.

Role of templating agents on the growth morphology of AIPO₄
pp. 4069-4071(3)
Authors: Pathak, L. C.; Singh, T. B.; Das, S. K.

Creep behavior of MoSi₂ and MoSi₂ + SiC composite
pp. 4073-4077(5)
Authors: Hvizdo, P.; Dusza, J.; Steinkellner, W.; Kromp, K.

Review papers in Journal of Materials Science Volumes 37, 38 and 39
pp. 4079-4080(2)