Journal of Materials Science

Keyword contents
pp. iii-iii(1)

Author Index and Subject Index of Journal of Materials Science Vol. 38 and Journal of Materials Science Letters Vol. 22
pp. A1-S9(9)

Nanococoon seeds for BN nanotube growth
pp. 4805-4810(6)
Authors: Altoe, M. V. P.; Sprunck, J. P.; Gabriel, J.-C. P.; Bradley, K.

The mechanical properties of tubular solid oxide fuel cells
pp. 4811-4816(6)
Authors: Sammes, N. M.; Du, Yanhai

Microstructural characterization of porous manganese thin films for electrochemical supercapacitor applications
pp. 4817-4830(14)
Authors: Djurfors, B.; Broughton, J. N.; Brett, M. J.; Ivey, D. G.

The use of silane coupling agents in the design of electrically stable interfaces of 6061 T6 aluminum alloy surfaces and epoxy-based electrically conductive adhesives
pp. 4831-4842(12)
Authors: Matienzo, L. J.; Egitto, F. D.; Logan, P. E.

Comparison of indium purification between vacuum refining and electrowinning
pp. 4843-4848(6)
Authors: Lee, Man-Seung; Sohn, Keun-Yong

Mechano-electrochemical effect between erosion and corrosion
pp. 4849-4856(8)
Authors: Xie, Jianhui; Alpas, A. T.; Northwood, D. O.

Preformed sol-gel synthesis and characterization of YAlO₃
pp. 4857-4861(5)
Authors: Tanner, P. A.; Law, Po-Tak; Wong, Ka-Leung; Fu, Lianshe

Polyethylene/palygorskite nanocomposites with macromolecular comb structure via in situ polymerization
pp. 4863-4868(6)
Authors: Du, Zhongjie; Rong, Junfeng; Zhang, Wei; Jing, Zhenhua; Li, Hangquan

Defect-free sintering of two material powder injection molded components Part I Experimental investigations
pp. 4869-4874(6)
Authors: Heaney, D. F.; Suri, P.; German, R. M.

Defect-free sintering of two material powder injection molded components Part II Model
pp. 4875-4881(7)
Authors: Suri, P.; Heaney, D. F.; German, R. M.

The influence of interfacial dislocation arrangements in a fourth generation single crystal TMS-138 superalloy on creep properties
pp. 4883-4888(6)
Authors: Zhang, J. X.; Murakumo, T.; Koizumi, Y.; Harada, H.

Direct observation of the deformation of isolated huge spherulites in isotactic polypropylene
pp. 4889-4894(6)
Authors: Nitta, K.-H.; Takayanagi, M.

Grain orientation and anisotropy in the physical properties of SrBi₂(Nb_{1 - x}V_x)₂O₉ (0 x 0.3) ceramics
pp. 4895-4903(9)
Authors: Venkataraman, B. H.; Varma, K. B. R.

Influence of magnetic circuit production for their magnetic properties
pp. 4905-4910(6)
Author: Wilczynski, W.

Preparation of PS/TiO₂ core-shell microspheres and TiO₂ hollow shells
pp. 4911-4916(6)
Authors: Yin, Jiliang; Chen, Hongjin; Li, Zhongkai; Qian, Xuefeng; Yin, Jie; Shi, Meiwu; Zhou, Guotai

Structure and properties of fibrillar silicate/SBR composites by direct blend process
pp. 4917-4924(8)
Authors: Tian, Ming; Qu, Chengdong; Feng, Yuxing; Zhang, Liqun

Polymer/filler derived NbC composite ceramics
pp. 4925-4931(7)
Authors: Scheffler, M.; Dernovsek, O.; Schwarze, D.; Bressiani, A. H. A.; Bressiani, J. C.; Acchar, W.; Greil, P.

Pretreatment of stainless steel substrate surface for the growth of carbon nanotubes by PECVD
pp. 4933-4939(7)
Authors: Park, Dalkeun; Kim, Young Hoon; Lee, Joong Kee

Investigations of stiffness and fatigue properties of asphalt mixtures
pp. 4941-4949(9)
Authors: Lundström, R.; Isacsson, U.; Ekblad, J.

An investigation about thin films of poly[2-methoxy-5-(2-ethyl-hexyloxy) phenylene vinylene] (MEH-PPV) prepared by Langmuir-Schaefer technique
pp. 4951-4956(6)
Authors: Ram, M. K.; Bertoncello, P.; Nicolini, C.

The use of compacts for durability investigation of cement-based materials
pp. 4957-4964(8)
Authors: Beaudoin, J. J.; Raki, L.; Marchand, J.

Adhesion and friction behavior between fluorinated carbon fibers and poly (vinylidene fluoride)
pp. 4965-4972(8)
Authors: Bismarck, A.; Schulz, E.

Effect of reduced pressure on oxidation and thermal stability of polycarbosilane-derived SiC fibers
pp. 4973-4979(7)
Authors: Shimoo, T.; Okamura, K.; Takeuchi, H.

Review papers in Journal of Materials Science Volumes 37 and 38
pp. 4981-4981(1)