Journal of Materials Science

Synthesis of silicon carbide foams from polymeric precursors and their blends
pp. 2495-2505(11)
Authors: Bao X.; Nangrejo M.R.; Edirisinghe M.J.

Directional solidification of monocrystal superalloy by electron beam floating zone-melting
pp. 2507-2511(5)
Authors: Jun Z.; Yanhong L.; Jianguo L.; Hengzhi F.

Stress dependence on stress relaxation creep rate during tensile holding under creep-fatigue interaction in 1Cr-Mo-V steel
pp. 2513-2517(5)
Authors: Jeong C.Y.; Nam S.W.; Ginsztler J.

The equivalent elastic crack procedure as applied to internally pressurised crack problems
pp. 2519-2521(3)
Author: Smith E.

Effect of the structure of chain extenders on the dynamic mechanical behaviour of polyurethane
pp. 2523-2527(5)
Authors: Bae J.Y.; Chung D.J.; An J.H.; Shin D.H.

Properties and catalytic activity of NOx reduction of alumina-titania catalysts prepared by sol-gel method
pp. 2529-2534(6)
Authors: Kawabata K.; Yoshimatsu H.; Fujiwara K.; Yabuki T.; Osaka A.; Miura Y.

Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics
pp. 2535-2546(12)
Authors: Gamstedt E.K.; Talreja R.

Effect of raw materials on carbothermal reduction synthesis of -aluminum oxynitride spinel powder
pp. 2547-2552(6)
Authors: Yawei L.; Nan L.; Runzhang Y.

Thermoplastic elastomers based on ionomeric polyblends of zinc salts of poly(propylene-co-acrylic acid) and carboxylated nitrile rubber
pp. 2553-2560(8)
Authors: Antony P.; Bandyopadhyay S.; De S.K.

Study of overgrowth heterostructure InSb/GaAs by scanning electron acoustic microscopy
pp. 2561-2564(4)
Authors: Li S.; Kubalek E.; Jin Y.; Jiang F.; Yin Q.

Phase transition and electrical conductivity in the system YMnO3-CaMnO3
pp. 2565-2568(4)
Authors: Moure C.; Villegas M.; Fernandez J.F.; Tartaj J.; Duran P.

The effect of SiO2 addition in super-hydrophilic property of TiO2 photocatalyst
pp. 2569-2574(6)
Authors: Machida M.; Norimoto K.; Watanabe T.; Hashimoto K.; Fujishima A.

Textures and structures of vapor deposits
pp. 2575-2582(8)
Author: Lee D.N.

Niobium segregation in Inconel 718
pp. 2583-2586(4)
Authors: Liu W.C.; Yao M.; Chen Z.L.; Wang S.G.

Tensile behaviour of as deposited and heat-treated electroless Ni-P deposits
pp. 2587-2600(14)
Authors: Panagopoulos C.N.; Papachristos V.D.; Sigalas C.

Acid-assisted consolidation of powder compacts: cold-welding or cold sintering
pp. 2601-2607(7)
Authors: Dariel M.P.; Ratzker M.; Eichmiller F.C.

Thermal evolution crystal structure and cation valence of Mn in substituted Ba--Al2O3 prepared via coprecipitation in aqueous medium
pp. 2609-2620(12)
Authors: Groppi G.; Bellotto M.; Cristiani C.; Forzatti P.; Villa P.

Suspension properties of hexagonal BN powders: effect of pH and oxygen content
pp. 2621-2625(5)
Authors: Crimp M.J.; Oppermann D.A.; Krehbiel K.

A study of the degradation of uncured DGEBA/PVP blends by thermogravimetry and their miscibility state*
pp. 2627-2633(7)
Authors: Remiro P.M.; Cortazar M.M.; Calahorra M.E.

Varistor characteristics in PTCR-type (Ba,Sr)TiO3 ceramics prepared by single-step firing in air
pp. 2635-2639(5)
Authors: Kuwabara M.; Matsuda H.; Ohba Y.

Processing and thermomechanical evaluation of fibre-reinforced alumina filters
pp. 2641-2649(9)
Authors: Paiva A.E.M.; Sepulveda P.; Pandolfelli V.C.

Irradiation effect on (Bi-Pb) 2223superconductor
pp. 2651-2654(4)
Author: Al-Hawery A.S.

Hydrogen storage characteristics of ball-milled magnesium-nickel and magnesium-iron alloys
pp. 2655-2663(9)
Authors: Holtz R.L.; Imam M.A.

Formation process of mixed silicon and tungsten carbide from copyrolysis of polysilane and metallic tungsten: Part I
pp. 2665-2670(6)
Authors: Martin H.-P.; Müller E.; Dachselt U.

Formation process of mixed silicon and titanium carbide from copyrolysis of polysilane and metallic titanium: Part II
pp. 2671-2678(8)
Authors: Martin H.-P.; Müller E.

A study on composition and crystal structure of dispersoids in AlMgSi alloys
pp. 2679-2683(5)
Authors: Yoo J.E.; Shan A.; Moon I.G.; Maeng S.J.

Preparation and properties of alumina-baria nano-composites
pp. 2685-2694(10)
Authors: Djurii B.; Pickering S.; Mcgarry D.

Cavitation behaviour in fine grain 3Y-TZP during tensile and compressive superplastic flow
pp. 2695-2702(8)
Authors: Wang Z.C.; Ridley N.; Davies T.J.

Sensing damage in carbon fiber and its polymer-matrix and carbon-matrix composites by electrical resistance measurement
pp. 2703-2713(11)
Authors: Wang X.; Wang S.; Chung D.D.L.

Temperature dependence of the electrical conductivity in 4, 4 bis(2-thenylideneamino)biphenyl and 4, 4 bis(thenyldiphenyl-phosphinylmethyleneamino)biphenyl compounds
pp. 2715-2718(4)
Authors: El-Sayed B.A.; El-Nawawy M.A.; Abd Ellah E.M.; Farag R.S.

Proposal for a torsion shear fixture for bonded joints
pp. 2719-2727(9)
Authors: Ouddane M.; Boukhili R.

Exchange couplings between two Fe layers in Fe/Al/Fe/Ni-Fe/NiO sandwiches
pp. 2729-2732(4)
Authors: Nakatani R.; Hoshino K.; Hoshiya H.; Sugita Y.

Characterization of polyaniline by cyclic voltammetry and UV-Vis absorption spectroscopy
pp. 2733-2739(7)
Authors: Pruneanu S.; Veress E.; Marian I.; Oniciu L.

The synthesis of polyetheretherketones and investigations of their properties
pp. 2741-2744(4)
Authors: Ozden S.; Charayev A.M.; Shaov A.H.

A structure model and growth mechanism for novel carbon nanotubes
pp. 2745-2749(5)
Authors: Li W.; Xie S.; Liu W.; Zhao R.; Zhang Y.; Zhou W.; Wang G.; Qian L.

Experimental and theoretical aspects of the stabilization of zirconia.
pp. 2751-2756(6)
Authors: Bechepeche A.P.; Treu Jr O.; Longo E.; Paiva-Santos C.O.; Varela J.A.