Journal of Materials Science

Phase transformation in the Al2O3–ZrO2 system
pp. 1399-1403(5)
Authors: GAO L.; LIU Q.; HONG J.S.; MIYAMOTO H.; DE LA TORRE S.D.; KAKITSUJI A.; LIDDELL K.; THOMPSON D.P.

Fatigue propagation behaviour of polystyrene/polyethylene blends
pp. 1405-1419(15)
Authors: BUREAU M.N.; DICKSON J.I.; DENAULT J.

Laser-shock processing of aluminium-coated 55C1 steel in water-confinement regime, characterization and application to high-cycle fatigue behaviour
pp. 1421-1429(9)
Authors: PEYRE P.; BERTHE L.; SCHERPEREEL X.; FABBRO R.

Deformation characteristics of metal foams
pp. 1431-1440(10)
Authors: BANHART J.; BAUMEISTER J.

Preparation and optical properties of nanocrystalline (C6H5C2H4NH3)2PbI4-doped PMMA films
pp. 1441-1444(4)
Author: KITAZAWA N.

Mechanical properties and microstructures of rapidly solidified Al89.5Ni8Zr2.5 and Al88.5Ni8Ti3.5 alloys
pp. 1445-1449(5)
Authors: GUO J.Q.; KAZAMA N.S.; OHTERA K.

The effects of ageing condition on shear localization from the tip of a notch in maraging steel
pp. 1451-1460(10)
Authors: MASON J.J.; ZIMMERMAN J.A.; ROESSIG K.M.

Surface properties and adhesion of maleinized polyethylene films
pp. 1461-1464(4)
Authors: BONGIOVANNI R.; GAGNOR B.; MALUCELLI G.; PRIOLA A.; POLLICINO A.

Characterization of Nicalon fibres with varying diameters: Part I Strength and fracture studies
pp. 1465-1473(9)
Authors: TAYLOR S.T.; ZHU Y.T.; BLUMENTHAL W.R.; STOUT M.G.; BUTT D.P.; LOWE T.C.

Characterization of Nicalon fibres with varying diameters: Part II Modified Weibull distribution
pp. 1475-1480(6)
Authors: ZHU Y.T.; TAYLOR S.T.; STOUT M.G.; BUTT D.P.; BLUMENTHAL W.R.; LOWE T.C.

Effects of Mn on fracture behaviour of DO3 Fe3Al-based intermetallic alloy
pp. 1481-1486(6)
Authors: BAIYANG L.; ZHANG X.B.; MAOSEN L.; ZHANG Z.

Formation of nodular defects as revealed by simulation of a modified ballistic model of depositional growth
pp. 1487-1490(4)
Authors: LANG Z.; XIUQIN W.

Preparation and characterization of spinel-type Mn–Ni–Co–O negative temperature coefficient ceramic thermistors
pp. 1491-1496(6)
Authors: MARTIN DE VIDALES J.L.; GARCIA-CHAIN P.; ROJAS R.M.; VILA E.; GARCIA-MARTINEZ O.

Modelling the three-dimensional elastic constants of parallel-fibred and lamellar bone
pp. 1497-1509(13)
Authors: AKIVA U.; WAGNER H.D.; WEINER S.

Effect of silver on the formation of Bi2Sr2Ca2Cu3O10 (Bi-2 2 2 3) superconductors by sol–gel process
pp. 1511-1516(6)
Authors: RAMA RAO G.V.; SWAMINATHAN K.; SREEDHARAN O.M.; VENKADESAN S.; MANNAN S.L.; VARADARAJU U.V.

Rheological characterization of dry-formed networks of rayon fibres
pp. 1517-1527(11)
Authors: Askling C.; Wågberg L.; Rigdahl M.

Processing and characterization of an amorphous Si–N–(O) fibre
pp. 1529-1540(12)
Authors: Chollon G.; Vogt U.; Berroth K.

Observations related to the phosphating of aluminium alloy 7075-T6 using a spraying technique
pp. 1541-1547(7)
Authors: Fang J.; Wong P.C.; Mitchell K.A.R.; Foster T.

Fast Li+ ion conduction in Li2O–(Al2O3 Ga22O3)–TiO2–P2O5 glass–ceramics
pp. 1549-1553(5)
Author: Fu J.

Estimation of creep crack growth rate in IN-100 based on the Q* parameter concept
pp. 1555-1562(8)
Authors: Yokobori Jr A.T.; Uesugi T.; Yokobori T.; Fuji A.; Kitagawa M.; Yamaya I.; Tabuchi M.; Yagi K.

Formation of pseudobrookite through gaseous chlorides and by solid-state reaction
pp. 1563-1569(7)
Authors: Gennari F.C.; Andrade Gamboa J.J.; Pasquevich D.M.

Kinetics of the anatase–rutile transformation in TiO2 in the presence of Fe2O3
pp. 1571-1578(8)
Authors: Gennari F.C.; Pasquevich D.M.

Squeeze casting of magnesium alloys and their composites
pp. 1579-1589(11)
Author: Hu H.

Comparison of the fatigue propagation behaviour of polystyrene and 95/5 polystyrene/polyethylene blends
pp. 1591-1606(16)
Authors: Bureau M.N.; Dickson J.I.; Denault J.

Viscoelastic tensile and shear properties of the 62 wt% Sn–36 wt% Pb–2 wt% Ag solder alloy
pp. 1607-1610(4)
Author: Veidt M.

Improvement in the mechanical strength of asymmetric polyolefin model interfaces
pp. 1611-1618(8)
Authors: Plawky U.; Wenig W.

Inelastic response of confined aluminium oxide under dynamic loading conditions
pp. 1619-1625(7)
Authors: Lankford J.; Anderson Jr C.E.; Nagy A.J.; Walker J.D.; Nicholls A.E.; Page R.A.

Convection during the vertical Bridgman growth of Hg1-xCdxTe
pp. 1627-1632(6)
Authors: Fano V.; Ortalli I.; Pozela K.; Meletti G.

Dielectric anomaly and low frequency dispersion in ferroelectric materials at high temperatures
pp. 1633-1637(5)
Authors: M'Peko J.-C.; Portelles J.; Calderón F.; Rodríguez G.

Subsurface structure of alumina associated with single-point scratching
pp. 1639-1645(7)
Authors: Zarudi I.; Zhang L.C.; Cockayne D.

Mechanical properties Of Si3N4 cerarnics reinforced with SiC whiskers and SiC platelets
pp. 1647-1651(5)
Authors: Fukasawa T.; Goto Y.

Elevated temperature mechanical properties of MoSi2/Si3N4, MoSi2/SiC composites produced by self-propagating high temperature synthesis
pp. 1653-1660(8)
Authors: Bartlett A.H.; Castro R.G.

Processing, microstructure and fracture behaviour of a spray-atomized and deposited nickel aluminide intermetallic
pp. 1661-1675(15)
Authors: Lawrynowicz D.; Liang X.; Srivatsan T.S.; Lavernia E.J.