Journal of Materials Science

Particle fracture in metal-matrix composite friction joints
pp. 4739-4748(10)
Authors: MALDONADO C.; NORTH T.H.

Fracture mechanisms of poly(ethylene terephthalate) and blends with styrene-butadiene-styrene elastomers
pp. 4749-4758(10)
Authors: TANRATTANAKUL V.; PERKINS W.G.; MASSEY F.L.; MOET A.; HILTNER A.; BAER E.

A new method to normalize the effect of matrix properties on the value of interfacial shear strength obtained from the fragmentation test
pp. 4759-4765(7)
Authors: TRIPATHI D.; TURTON T.; CHEN F.; JONES F.R.

Fracture toughness of multiphase polypropylene composites containing rubbery and particulate inclusions
pp. 4767-4775(9)
Authors: HORNSBY P.R.; PREMPHET K.

Strength and fracture toughness of in situ-toughened silicon carbide
pp. 4777-4782(6)
Authors: CHO D-H.; KIM Y-W.; KIM W.

The austempering kinetics and mechanical properties of an austempered Cu–Ni–Mo–Mn alloyed ductile iron
pp. 4783-4791(9)
Authors: BAHMANI M.; ELLIOTT R.; VARAHRAM N.

The structure of the calcium silicate hydrate phases present in hardened pastes of white Portland cement/blast-furnace slag blends
pp. 4793-4802(10)
Authors: RICHARDSON I.G.; GROVES G.W.

Agglomeration parameter, aggregation number, and aggregate porosity
pp. 4803-4806(4)
Authors: SHIN H-S.; LEE B-K.

Low frequency dielectric spectroscopy characterization of microcrystalline cellulose, tablets and paper
pp. 4807-4814(8)
Authors: EK R.; HILL R.M.; NEWTON J.M.

Carbide precipitation in some secondary hardened steels
pp. 4815-4820(6)
Authors: GINGELL A.D.B.; BHADESHIA H.K.D.H.; JONES D.G.; MAWELLA K.J.A.

The hot compaction of SPECTRA gel-spun polyethylene fibre
pp. 4821-4832(12)
Authors: YAN R.J.; HINE P.J.; WARD I.M.; OLLEY R.H.; BASSETT D.C.

Preparation and properties of barium aluminosilicate glass-ceramics
pp. 4833-4836(4)
Authors: ZHOU W.; ZHANG L.; YANG J.

Structural transformation of dip coated CdS thin films during annealing
pp. 4837-4840(4)
Authors: NARAYANAN K.L.; VIJAYAKUMAR K.P.; NAIR K.G.M.; THAMPI N.S.; KRISHAN K.

Microstructural study of treated grade 702 zirconium. Scanning electron microscopy and transmission electron microscopy, complementarity of two observational scales
pp. 4841-4846(6)
Authors: CREPIN J.; BRETHEAU T.; CALDEMAISON D.; BARBU A.; JAZKIEROWITCZ G.

Massive transformation in an Fe–Cu alloy
pp. 4847-4855(9)
Authors: HWANG N.M.; YOON D.Y.

Mechanical alloying synthesis and structural characterization of ternary Ni-Al-Fe alloys
pp. 4857-4864(8)
Authors: LIU Z.G.; GUO J.T.; ZHOU L.Z.; HU Z.Q.; UMEMOTO M.

Transformation toughening in the -TiAl–-Ti–V system: Part I Finite element analysis of a crack touching the interface
pp. 4865-4874(10)
Authors: GRUJICIC M.; DANG P.

Transformation toughening in the -TiAl–-Ti–Vsystem: Part II A molecular dynamics study
pp. 4875-4887(13)
Authors: DANG P.; GRUJICIC M.

Shear properties of organic films adsorbed on silica fibres
pp. 4889-4893(5)
Author: LEE I.

Silicon oxide thin films prepared by a photo-chemical vapour deposition technique
pp. 4895-4900(6)
Authors: JANA T.; GHOSH S.; RAY S.

The use of X-ray line profile analysis in the tetragonal to monoclinic phase transformation of ball milled, as-sintered and thermally aged zirconia powders
pp. 4901-4908(8)
Authors: LIN J-D.; DUH J-G.

Anodic film formation on high strength aluminium alloy FVS0812
pp. 4909-4916(8)
Authors: SYKES J.; THOMPSON G.E.; MAYO D.; SKELDON P.

Gamma prime () precipitating and ageing behaviours in two newly developed nickel-base superalloys
pp. 4917-4923(7)
Authors: KIM H.T.; CHUN S.S.; YAO X.X.; FANG Y.; CHOI J.

Enhancing densification of zirconia-containing ceramic-matrix composites by microwave processing
pp. 4925-4930(6)
Authors: FANG Y.; CHENG J.; ROY R.; ROY D.M.; AGRAWAL D.K.

Wettability of NiAl by a liquid Ni–Si–B alloy
pp. 4931-4940(10)
Authors: GALE W.F.; FERGUS J.W.; INGRAM W.M.; KOOPMAN M.

Micromechanical analysis of the finite element calculation of a diffusional transformation
pp. 4941-4955(15)
Authors: GANGHOFFER J.F.; DENIS S.; GAUTIER E.; SJOSTROM S.

Synthesis and growth mechanism of ThO2–W–Mo alloy nanocomposite powder
pp. 4957-4965(9)
Authors: DEVAUX X.; THOMY A.; GHANBAJA J.

Adhesion strength of silver thick-film conductors by solder-free test
pp. 4967-4971(5)
Authors: ENOKIDO Y.; YAMAGUCHI T.

Mechanical properties and microstructure of reaction sintered -sialon ceramics prepared by a slip casting method
pp. 4973-4977(5)
Authors: HAYAMA S.; NASU T.; OZAWA M.; SUZUKI S.

Preparation, electrochemical, photoelectrochemical and solid-state characteristics of indium-incorporated TiO2 thin films for solar cell fabrication
pp. 4979-4984(6)
Author: BADAWY W.A.

Synthesis and properties of simultaneous interpenetrating networks based on poly(urethane-epoxy)/allyl novolac resin
pp. 4985-4990(6)
Authors: CHIANG W-Y.; CHANG D-M.

Structural effects of interaction between lanthanum cuprate and cerium dioxide
pp. 4991-4997(7)
Authors: MUKOVOZOV I.E.; EZERETS A.M.; VISHNIAKOV A.V.; FORNI L.; OLIVA C.

Fabrication of high aspect ratio silicon micro-tips for field emission devices
pp. 4999-5003(5)
Authors: CHUNG I.J.; MURFETT D.B.; HARIZ A.; HASKARD M.R.

Superhardening behaviour of titanium treated Cr–Mo steel
pp. 5005-5010(6)
Author: LIN H-R.

Interfacial morphologies between alumina and silver-copper-titanium alloy
pp. 5011-5015(5)
Authors: HAO H.; WANG Y.; JIN Z.; WANG X.

Synthesis characterization and hydrogen absorption studies of the composite materials La2Mg17–x wt% LaNi5
pp. 5177-5184(8)
Author: PAL K.