Journal of Materials Engineering and Performance

Editorial
pp. 487-488(2)
Authors: Grummon, David; Mitchell, M.; Mertmann, Matthias

Design of a Telescopic Linear Actuator Based on Hollow Shape Memory Springs
pp. 489-496(8)
Authors: Spaggiari, Andrea; Spinella, Igor; Dragoni, Eugenio

Actuators and Drivers Based on CuAlNi Shape Memory Single Crystals
pp. 497-499(3)
Authors: Pulnev, S.; Nikolaev, V.; Priadko, A.; Rogov, A.; Vahhi, I.

Processing and Damping Properties of Sputtered NiTi Thin Films for Tools in Machining Processes
pp. 500-505(6)
Authors: Kahleyss, F.; Miranda, R.; Surmann, T.; Zamponi, C.; Machai, C.; Biermann, D.; Quandt, E.

Long-Time Stability of Ni-Ti-Shape Memory Alloys for Automotive Safety Systems
pp. 506-510(5)
Authors: Strittmatter, Joachim; Gümpel, Paul

Processing of NiTi Foams by Transient Liquid Phase Sintering
pp. 511-516(6)
Authors: Bansiddhi, Ampika; Dunand, David

Property of Amorphous/Nanocrystalline Hybrid Wires of TiNi-Base Shape Memory Alloys
pp. 517-521(5)
Authors: Tsuchiya, Koichi; Koike, Tadahiro

Mechanical Properties of Highly Porous NiTi Alloys
pp. 522-528(7)
Authors: Bram, Martin; Köhl, Manuel; Buchkremer, Hans; Stöver, Detlev

A Study of the Properties of a Room Temperature Martensitic Binary Nitinol Alloy Above and Below its Martensite to Austenite Transformation Temperature
pp. 529-534(6)
Author: Norwich, Dennis

Numerical Studies on the Seismic Retrofit of Bridges Using Shape Memory Alloys
pp. 535-543(9)
Authors: Cardone, Donatello; Perrone, Giuseppe; Sofia, Salvatore

Functional Characterization of Shape Memory CuZnAl Open-Cell Foams by Molten Metal Infiltration
pp. 544-550(7)
Authors: Arnaboldi, S.; Bassani, P.; Passaretti, F.; Redaelli, A.; Tuissi, A.

Simulated and Experimental Damping Properties of a SMA/Fiber Glass Laminated Composite
pp. 551-558(8)
Authors: Arnaboldi, S.; Bassani, P.; Biffi, C.; Tuissi, A.; Carnevale, M.; Lecis, N.; LoConte, A.; Previtali, B.

Smart Control Systems for Smart Materials
pp. 559-563(5)
Authors: Meier, Horst; Czechowicz, Alexander; Haberland, Christoph; Langbein, Sven

Strategies for Self-Repairing Shape Memory Alloy Actuators
pp. 564-569(6)
Authors: Langbein, Sven; Czechowicz, Alexander; Meier, Horst

Model and Simulation of an SMA Enhanced Lip Seal
pp. 570-578(9)
Authors: Qiao, Rui; Gao, Xiujie; Brinson, L.

Accelerated Fatigue Testing of Stent-Like Diamond Specimens
pp. 579-583(5)
Authors: Zipse, A.; Schlun, M.; Dreher, G.; Zum Gahr, J.; Rebelo, N.

Design, Analysis, and Simulated Testing of a Surrogate Nitinol Fatigue Specimen
pp. 584-590(7)
Author: Kari, Stuart

Nitinol Fatigue Investigation on Stent-Finish Specimens Using Tension-Tension Method
pp. 591-596(6)
Authors: Lin, Z.; Pike, K.; Zipse, A.; Schlun, M.

Stress-Induced Martensite in Front of Crack Tips in NiTi Shape Memory Alloys: Modeling Versus Experiments
pp. 597-604(8)
Authors: Maletta, C.; Young, M.

A Material Model for the Cyclic Behavior of Nitinol
pp. 605-612(8)
Authors: Rebelo, Nuno; Zipse, Achim; Schlun, Martin; Dreher, Gael

Nitinol Fatigue: A Review of Microstructures and Mechanisms
pp. 613-617(5)
Author: Pelton, A.

Effect of Aging on the Microstructure and Shape Memory Effect of a Hot-Rolled NiTiHf Alloy
pp. 618-622(5)
Authors: Javadi, Mahdi; Belbasi, Majid; Salehi, Mohammad; Afshar, M.

Patellar Shape-Memory Fixator for the Treatment of Comminuted Fractures of the Inferior Pole of the Patella
pp. 623-628(6)
Authors: Liu, Xin-Wei; Shang, Hui-Juan; Xu, Shuo-Gui; Wang, Zhi-Wei; Zhang, Chun-Cai; Fu, Qing-Ge

Treatment of Nonunion of Scaphoid Waist with Ni-Ti Shape-Memory Alloy Connector and Iliac Bone Graft
pp. 629-631(3)
Authors: Cao, Lie-Hu; Xu, Shuo-Gui; Wu, Ya-Le; Zhang, Chun-Cai

Treatment of Clavicular Nonunions with Shape Memory Ni-Ti Alloy Swan-Like Bone Connector
pp. 632-636(5)
Authors: Liu, Xin-wei; Xu, Shuo-gui; Wang, Pan-feng; Zhang, Chun-cai

Expression of TGF-β in Fractures Fixed by Nitinol Swan-like Memory Compressive Connectors
pp. 637-640(4)
Authors: Li, M.; Zhang, C.; Xu, S.; Fu, Q.

An Evaluation of a NiTiCo Alloy and its Suitability for Medical Device Applications
pp. 641-645(5)
Authors: Fasching, Audrey; Norwich, D.; Geiser, T.; Paul, Graeme

FE Analysis of Nitinol Leaf Springs Used in a Compression Anastomosis Device
pp. 646-652(7)
Authors: Weizman, Amir; Monassevitch, Leonid; Greenberg, Kobby; Millis, Shahar; Harari, Boaz; Dar, Idan

Characterization of Two Ti-Nb-Hf-Zr Alloys Under Different Cold Rolling Conditions
pp. 653-657(5)
Authors: González, M.; Gil, F.; Manero, J.; Peña, J.

Applicability of Shape Memory Alloy Wire for an Active, Soft Orthotic
pp. 658-662(5)
Authors: Stirling, Leia; Yu, Chih-Han; Miller, Jason; Hawkes, Elliot; Wood, Robert; Goldfield, Eugene; Nagpal, Radhika

Nitinol for Prosthetic and Orthotic Applications
pp. 663-665(3)
Authors: Henderson, Emma; Buis, Arjan

An EMG-Controlled SMA Device for the Rehabilitation of the Ankle Joint in Post-Acute Stroke
pp. 666-670(5)
Authors: Pittaccio, S.; Viscuso, S.

Biomechanical Study of Acetabular Tridimensional Memoryalloy Fixation System
pp. 671-678(8)
Authors: Liu, Xin-Wei; Xu, Shuo-Gui; Zhang, Yun-Tong; Zhang, Chun-Cai

Abrasive Wear of Fe-Mn-Si-Cr-Ni Shape Memory Stainless Steel: Preliminary Results
pp. 679-683(5)
Authors: Silva, Christian; Bernardi, Heide; Otubo, Jorge

Effects of Cyclic Loading on the Uniaxial Behavior of Nitinol
pp. 684-687(4)
Authors: Schlun, M.; Zipse, A.; Dreher, G.; Rebelo, N.

Analysis of Wire Position and Operating Conditions on Functioning of NiTi Wires for Shape Memory Actuators
pp. 688-696(9)
Authors: Zanotti, C.; Giuliani, P.; Arnaboldi, S.; Tuissi, A.

Nitinol Stent Fatigue in a Peripheral Human Artery Subjected to Pulsatile and Articulation Loading
pp. 697-705(9)
Author: Harvey, Sean

Theoretical and Experimental Investigation on SMA Superelastic Springs
pp. 706-711(6)
Authors: Attanasi, Gabriele; Auricchio, Ferdinando; Urbano, Marco

Theoretical and Experimental Study of the Shape Memory Effect of Beams in Bending Conditions
pp. 712-718(7)
Authors: Auricchio, Ferdinando; Morganti, Simone; Reali, Alessandro; Urbano, Marco

Finite-Element Simulation of the Anti-Buckling-Effect of a Shape Memory Alloy Bar
pp. 719-730(12)
Authors: Richter, Frank; Kastner, Oliver; Eggeler, Gunther

Modeling of Ultrasonic Initiation of Shape Memory Effect
pp. 731-736(6)
Authors: Rubanik, V.; Klubovich, V.; Shadursky, A.

A Comparison of Different Nitinol Material Data Sources for Finite Element Analysis
pp. 737-744(8)
Authors: Nagl, Frank; Siekmeyer, Gerd; Quellmalz, Michael; Schuessler, Andreas

A Study on Micro-Machining Technology for the Machining of NiTi: Five-Axis Micro-Milling and Micro Deep-Hole Drilling
pp. 745-751(7)
Authors: Biermann, D.; Kahleyss, F.; Krebs, E.; Upmeier, T.

Comparison of Inclusions in Cold Drawn Wire and Precursor Hot-Rolled Rod Coil in VIM-VAR Nickel-Titanium Alloy
pp. 752-756(5)
Authors: Sczerzenie, Frank; Paul, Graeme; Belden, Clarence

Production of Nitinol Wire from Elemental Nickel and Titanium Powders Through Spark Plasma Sintering and Extrusion
pp. 757-761(5)
Authors: Butler, J.; Tiernan, P.; Gandhi, A.; McNamara, K.; Tofail, S.

Effects of Sn and Zr on the Microstructure and Mechanical Properties of Ti-Ta-Based Shape Memory Alloys
pp. 762-766(5)
Authors: Tong, Y.; Guo, B.; Zheng, Y.; Chung, C.; Ma, L.

Effect of Ternary Addition of Iron on Shape Memory Characteristics of Cu-Al Alloys
pp. 767-770(4)
Authors: Raju, T.; Sampath, V.

Stability in Phase Transformation After Multiple Steps of Marforming in Ti-Rich Ni-Ti Shape Memory Alloy
pp. 771-775(5)
Authors: Santos Paula, Andersan; Mahesh, Karimbi; Braz Fernandes, Francisco

Achieving Small Structures in Thin NiTi Sheets for Medical Applications with Water Jet and Micro Machining: A Comparison
pp. 776-782(7)
Authors: Frotscher, M.; Kahleyss, F.; Simon, T.; Biermann, D.; Eggeler, G.

Properties of Porous TiNbZr Shape Memory Alloy Fabricated by Mechanical Alloying and Hot Isostatic Pressing
pp. 783-786(4)
Authors: Ma, L.; Chung, C.; Tong, Y.; Zheng, Y.

Study on Thermomechanical Treatment, Mechanical Properties and Fatigue of Nitinol Superelastic Thin Sheet
pp. 787-792(6)
Authors: Mertmann, Matthias; Oswald, Wolfgang; Steegmüller, Rainer; Schüssler, Andreas

Rapid Obtaining of Nano-Hydroxyapatite Bioactive Films on NiTi Shape Memory Alloy by Electrodeposition Process
pp. 793-797(5)
Authors: Lobo, A.; Otubo, J.; Matsushima, J.; Corat, E.

Determination of Ni Release in NiTi SMA with Surface Modification by Nitrogen Plasma Immersion Ion Implantation
pp. 798-801(4)
Authors: Camargo, Eliene; Oliveira Lobo, Anderson; Silva, Maria; Ueda, Mario; Garcia, Edivaldo; Pichon, Luc; Reuther, Helfried; Otubo, Jorge

The Effect of Material Removal on the Corrosion Resistance and Biocompatibility of Nitinol Laser-Cut and Wire-Form Products
pp. 802-806(5)
Authors: Decker, Jennifer; Trépanier, Christine; Vien, Lot; Pelton, Alan

Effect of Biodegradable Shape-Memory Polymers on Proliferation of 3T3 Cells
pp. 807-811(5)
Authors: Xu, Shuo-Gui; Zhang, Peng; Zhu, Guang-Ming; Jiang, Ying-Ming

Assessment of Corrosion Resistance and Metal Ion Leaching of Nitinol Alloys
pp. 812-815(4)
Authors: Haider, Waseem; Munroe, Norman

Cytotoxicity of Metal Ions Released from Nitinol Alloys on Endothelial Cells
pp. 816-818(3)
Authors: Haider, W.; Munroe, N.; Tek, V.; Gill, P.; Tang, Y.; McGoron, A.

Effect of Manufacturing Process on the Biocompatibility and Mechanical Properties of Ti-30Ta Alloy
pp. 819-823(5)
Authors: Gill, P.; Munroe, N.; Pulletikurthi, C.; Pandya, S.; Haider, W.

Cytotoxicity of Ni from Surface-Treated Porous Nitinol (PNT) on Osteoblast Cells
pp. 824-829(6)
Authors: Pulletikurthi, C.; Munroe, N.; Gill, P.; Pandya, S.; Persaud, D.; Haider, W.; Iyer, K.; McGoron, A.

Comparison of Optical and SEM-BEI Inclusion Analyses of VIM-VAR Nickel-Titanium Alloy
pp. 830-834(5)
Authors: Sczerzenie, Frank; Paul, Graeme; Belden, Clarence; Fasching, Audrey

Development of the Z Specimen for Tensile-Tensile, Tensile-Compression, Compression-Compression Wire Testing
pp. 835-837(3)
Authors: Pike, K.; Berg, B.; Adler, P.