Chemical and Petroleum Engineering

Analysis of the power of a rotary-press drive for the molding of multiple-component combined articles
pp. 161-166(6)
Authors: Arkhangelskii, V.; Teplishchev, S.

Optimization of components of molding rotors for automated production lines
pp. 167-172(6)
Authors: Teplishchev, S.; Arkhangelskii, V.

Modeling the vertical flow of a gaseous mixture with solid inclusions in a cylindrical pipe
pp. 173-183(11)
Authors: Berengarten, M.; Bogdanov, R.; Voronina, V.; Titov, V.

Cryogenic engineering, production and use of industrial gases, vacuum engineering: Low-temperature technologies for preventing accidental oil and gas blowouts during underwater recovery of crudes on submerged shelf
pp. 184-185(2)
Authors: Marinyuk, B.; Bazhinov, S.; Rudenko, M.

Influence of type of high-coercivity permanent magnet on characteristics of end magnetic clutch
pp. 186-192(7)
Author: Krasilnikov, A.

Detachable sealed joint having two successively placed sealing elements
pp. 193-197(5)
Author: Prodan, V.

Ecological problems of utilization of waste activated sludge of saratov refinery and ways to solve them
pp. 198-203(6)
Authors: Sobgaida, N.; Olshanskaya, L.; Solodkova, A.

Effective hardware for connection and repair of polyethylene pipelines using ultrasonic modification and heat shrinkage. Part 1. Aspects of connection and restoration of polymeric pipelines for gas transport
pp. 204-209(6)
Authors: Kolosov, A.; Sakharov, O.; Sivetskii, V.; Sidorov, D.; Pristailov, S.

Effective hardware for connection and repair of polyethylene pipelines using ultrasonic modification and heat shrinkage. Part 2. Production bases for molding of epoxy repair couplings with shape memory
pp. 210-215(6)
Authors: Kolosov, A.; Sakharov, O.; Sivetskii, V.; Sidorov, D.; Pristailov, S.

Effective hardware for connection and repair of polyethylene pipelines using ultrasonic modification and heat shrinkage. Part 3. Analysis of surface-treatment methods for polyethylene pipes connected by banding
pp. 216-222(7)
Authors: Kolosov, A.; Sakharov, O.; Sivetskii, V.; Sidorov, D.; Pristailov, S.

Limiting plastic load for a pressure vessel with a tangential branch pipe
pp. 225-230(6)
Authors: Skopinskii, V.; Berkov, N.; Vozhova, N.

Extrusion molding of polymers with allowance for near-wall slip
pp. 231-237(7)
Authors: Sakharov, A.; Sivetskii, V.; Sokolskii, A.

Method of analyzing heat exchange in a layer of disperse material purged by a gas flow
pp. 238-242(5)
Authors: Sufiyanov, R.; Khvan, A.; Maikov, I.

Determination of rolling time for thermoplastic compositions
pp. 243-249(7)
Author: Mikulenok, I.

Development and test of a new drop trap
pp. 250-255(6)
Authors: Petrashova, E.; Lagutkin, M.; Pushnov, A.; Shishov, V.

Criterion of analysis of the action of inertial force in medium- and high-speed milling units
pp. 256-260(5)
Author: Vaitekhovich, P.

Vacuum-crystallization units for the production of magnesium from serpentinite
pp. 261-265(5)
Authors: Tretyakov, D.; Ryabkov, V.; Trufanov, V.; Chemezov, V.; Bezkorovainyi, G.; Dydykina, L.; Vasiliev, S.; Shchelkonogov, A.; Kiselev, V.; Potekha, A.

Development of a neural network programming module for predicting the strength properties of solid fuel
pp. 266-269(4)
Authors: Mukhutdinov, A.; Okulin, M.

Use of a neural network approach to optimizing concrete composition with respect to strength
pp. 270-273(4)
Authors: Mukhutdinov, A.; Konstantinov, S.; Mukhutdinova, G.

Approval of a pyrolysis procedure in an experimental unit
pp. 274-279(6)
Authors: Sister, V.; Ivannikova, E.; Sulman, E.; Kosivtsov, Yu.; Lugovoi, Yu.

Effective hardware for connection and repair of polyethylene pipelines using ultrasonic modification and heat shrinkage. Part 4. Characteristics of practical implementation of production bases developed using epoxy-glue compositions and banding*
pp. 280-284(5)
Authors: Kolosov, A.; Sakharov, O.; Sivetskii, V.; Sidorov, D.; Pristailov, S.

Effective hardware for connection and repair of polyethylene pipelines using ultrasound modification and heat shrinking. Part 5. Aspects of thermistor couplings and components used in gas-pipeline repair
pp. 285-290(6)
Authors: Kolosov, A.; Sakharov, O.; Sivetskii, V.; Sidorov, D.; Pristailov, S.