Experimental milling moment model in orthogonal cutting condition: to an accurate energy balance
Source: The International Journal of Advanced Manufacturing Technology, Volume 55, Numbers 9-12, August 2011 , pp. 843-854(12)
Abstract:The control of cutting energy parameters is essential to optimize the cutting condition during the milling process. Our previous works (Cahuc et al., Int J Adv Manuf Technol 18(9):648–656, 2001; Darnis et al. 2000) have shown the existence of the six components of the cutting mechanical actions. Thus, the influence of geometric and kinematic parameters on the six components must be quantified. Based on the experimental approach explained in our last works (Albert et al., 2008a, b), this study proposes an energetic criterion characterizing the cutting moment in orthogonal cutting condition. Then, the energy balance has to take into account the cutting moment, highlighting the utility of this criterion. Therefore, the cutting moment model proposed allows an accurate evaluation of the energy balance and the mechanical actions (forces and moments) applied to the workpiece. Consequently, the cutting parameters can be chosen in order to optimize the cutting power consumption.
Document Type: Research Article
Affiliations: 1: Université de Bordeaux, LMP—UMR CNRS 5469, 351 cours de la Libération, 33405, Talence-Cedex, France (UE), Email: firstname.lastname@example.org 2: Université de Bordeaux, LGM2B—EA 496, 15 rue Naudet, 33175, Gradignan Cedex, France (UE) 3: Université de Bordeaux, LMP—UMR CNRS 5469, 351 cours de la Libération, 33405, Talence-Cedex, France (UE)
Publication date: August 2011