The International Journal of Advanced Manufacturing Technology

Computational modeling and control system of continuous casting process
pp. 1-6(6)
Authors: Wang, Ying-chun; Li, Da-yong; Peng, Ying-hong; Zhu, Li-guang

A parametric study on residual stresses and forging load in cold radial forging process
pp. 7-17(11)
Authors: Ameli, A.; Movahhedy, M.

Magnetic polishing of three dimensional die and mold surfaces
pp. 18-23(6)
Authors: Kim, Jeong-du; Noh, Ill-hwan

Deadlock control of flexible manufacturing systems via invariant-controlled elementary siphons of petri nets
pp. 24-35(12)
Authors: Li, Zhiwu; Wei, Na

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/E_r/1 queuing model
pp. 36-41(6)
Authors: Ohta, Hiroshi; Hirota, Tomoyuki; Rahim, Abdur

Optimal management for a finite M/M/R queueing system with two arrival modes
pp. 42-47(6)
Authors: Wang, Kuo-Hsiung; Ke, Jyh-Bin; Pearn, W.

Computer aided geometric feasible assembly sequence planning and optimizing
pp. 48-57(10)
Author: Su, Qiang

Computer aided geometric feasible assembly sequence planning and optimizing
pp. 58-58(1)
Author: Su, Qiang

A distributed product development architecture for engineering collaborations across ubiquitous virtual enterprises
pp. 59-70(12)
Authors: Lee, Jae; Kim, Kwangsoo

Editorial for the special issue of IJAMT on multi material microsystem manufacturing
pp. 73-74(2)
Authors: Menz, W.; Dimov, S.

The manufacturing of micro molds by conventional and energy-assisted processes
pp. 75-85(11)
Authors: Fleischer, J.; Kotschenreuther, J.

Patterned crack-free PZT thick films for micro-electromechanical system applications
pp. 86-94(9)
Authors: Dauchy, F.; Dorey, R.

Micro-machining of metals, ceramics and polymers using nanosecond lasers
pp. 95-102(8)
Authors: Knowles, M.; Rutterford, G.; Karnakis, D.; Ferguson, A.

An investigation of tube and rod electrode wear in micro EDM drilling
pp. 103-109(7)
Authors: Pham, D.; Ivanov, A.; Bigot, S.; Popov, K.; Dimov, S.

Comparison of optical and stylus methods for measurement of surface texture
pp. 110-118(9)
Authors: Vorburger, T.; Rhee, H.-G.; Renegar, T.; Song, J.-F.; Zheng, A.

Microforming at elevated temperature - forming and material behaviour
pp. 119-124(6)
Authors: Eichenhueller, Bernd; Egerer, Emil; Engel, Ulf

A friction model for microforming
pp. 125-129(5)
Authors: Jeon, J.; Bramley, A.

Surface characterisation in forming processes by functional 3D parameters
pp. 130-136(7)
Authors: Weidel, S.; Engel, U.

Micro-extrusion of ultra-fine grained aluminium
pp. 137-146(10)
Authors: Rosochowski, Andrzej; Presz, Wojciech; Olejnik, Lech; Richert, Maria

Micro-injection moulding: Factors affecting the achievable aspect ratios
pp. 147-156(10)
Authors: Sha, Baichuan; Dimov, Stefan; Griffiths, Christian; Packianather, Michael

Surface microstructure replication in injection molding
pp. 157-166(10)
Authors: Theilade, Uffe; Hansen, Hans

Process chain development for the rapid prototyping of microstructured polymer, ceramic and metal parts: composite flow behaviour optimisation, replication via reaction moulding and thermal postprocessing
pp. 167-175(9)
Authors: Hanemann, Thomas; Honnef, Kirsten; Hausselt, Juergen

Manufacturing of multi-functional micro parts by two-component metal injection moulding
pp. 176-186(11)
Authors: Imgrund, P.; Rota, A.; Petzoldt, F.; Simchi, A.

Packaging using hot-embossing with a polymeric intermediate mould
pp. 187-190(4)
Authors: Khan Malek, Chantal; Duffait, Roland

Comparison of bonding procedures for 3D-structured polyimide films on silicon substrates applied to ink-jet cartridges
pp. 191-197(7)
Authors: Goettsche, T.; Ruddy, C.; Heller, U.; Stehr, M.; Ashauer, H.; Lindemann, T.; Koltay, P.; Yu, Y.; Peters, R.-P.; Soriani, P.; Bellone, A.

Micro laser welding of polymer microstructures using low power laser diodes
pp. 198-205(8)
Authors: Ussing, T.; Petersen, L.; Nielsen, C.; Helbo, B.; Højslet, L.

Advances in micro assembly injection moulding for use in medical systems
pp. 206-211(6)
Authors: Michaeli, Walter; Opfermann, Dirk; Kamps, Thomas