Polymer International

Comprehensive study of polymer fiber surface modifications Part 1: high-fluence UV-excimer-laser-induced structures
pp. 627-633(7)
Authors: Yip J.; Chan K.; Sin K.M.; Lau K.S.

Comprehensive study of polymer fiber surface modifications Part 2: low-temperature oxygen-plasma treatment
pp. 634-639(6)
Authors: Yip J.; Chan K.; Sin K.M.; Lau K.S.

Chemorheological studies on a dicyanate resin modified with polyethersulfone
pp. 640-645(6)
Authors: Hong B.T.; Roh S.S.; Kim D.S.

Influence of the cure level on the monomeric friction coefficient of natural rubber vulcanizates
pp. 646-655(10)
Authors: Marzocca A.J.; Steren C.A.; Raimondo R.B.; Cerveny S.

In-depth characterization of granular starch-graft-polyester compositions as obtained by in situ polymerization of lactones from the starch surface
pp. 656-663(8)
Authors: Rutot-Houzé D.; Degée P.; Gouttebaron R.; Hecq M.; Narayan R.; Dubois P.

Crystallization and solid-state polymerization of poly(aryl ester)s
pp. 664-669(6)
Authors: James N.R.; Ramesh C.; Sivaram S.

Aluminum-borate-whiskers-reinforced bismaleimide composites. 1: preparation and properties
pp. 670-674(5)
Authors: Liang G.; Hu X.

A novel pH-sensitive gelatin–DNA semi-interpenetrating polymer network hydrogel
pp. 675-680(6)
Authors: Liu W.G.; Li X.W.; Ye G.X.; Sun S.J.; Zhu D.; Yao K.D.

Electroless recovery of gold chloride using inherently conducting polymers
pp. 681-687(7)
Authors: Ding J.; Price W.E.; Ralph S.F.; Wallace G.G.

Synthesis and characterization of novel polyimides starting from 1,2-bis(p-dimethylaminobenzylideneimino)alkane homologues and various dianhydrides
pp. 688-697(10)
Authors: Koytepe S.; Gök Y.; Alici B.; Seçkin T.; Çetinkaya E.

Effect of hydrotalcite on the thermal stability, mechanical properties, rheology and flame retardance of poly(vinyl chloride)
pp. 698-707(10)
Authors: Wang X.; Zhang Q.

Synthesis and photoconductive characteristics of biphenylporphyrin-containing poly(amic acid)s and polyimides
pp. 708-715(8)
Authors: Zhu B.K.; Xu Y.Y.; Wei X.Z.; Xu Z.K.

Mechanical properties and crystallization behavior of poly(lactic acid) blended with dendritic hyperbranched polymer
pp. 716-722(7)
Authors: Zhang J-F.; Sun X.

Plausible guard effect on the active sites of heterogeneous Ziegler–Natta catalyst by coordinating monomers and growing polymer chains in the initial stage of propene polymerization
pp. 723-727(5)
Authors: Murayama N.; Liu B.; Nakatani H.; Terano M.

Recycling PET beverage bottles and improving properties
pp. 728-732(5)
Authors: Oromiehie A.; Mamizadeh A.

Ozonation of unstretched natural rubber film from Hevea brasiliensis studied by ozone consumption and ¹³C NMR
pp. 733-739(7)
Authors: Rodrigues F.; Santos E.; Feitosa J.; Ricardo N.; Heatley F.

Apparent activation energy of degradation of poly[acrylonitrile-co-(N-vinylpyrrolidone)]
pp. 740-743(4)
Authors: Chen H.; Wang C-g.; Cai H-s.; Cui C-s.

Dielectric behaviour and relaxation in poly(propylene glycol)–water mixtures studied by time domain reflectometry
pp. 744-748(5)
Author: Sengwa R.

Preparation and structural study of polypropylene–talc gradient materials
pp. 749-755(7)
Authors: Wu G.; Wen B.; Hou S.

Preparation of vinyl polymers bearing photo-labile diethylthiocarbamoylthiyl (S₂CNEt₂) groups via ATRP
pp. 756-765(10)
Authors: Li P.; Qin S-H.; Qin D-Q.; Qiu K-Y.

Solvent-specific swelling behavior of poly(allylamine) gel
pp. 766-771(6)
Authors: Yasumoto N.; Hata Y.; Satoh M.

Reaction of poly(vinyl butyral) with tetraethyl orthosilicate: grafting of siloxane chains and new composites
pp. 772-776(5)
Authors: Annenkov V.V.; Danilovtseva E.N.; Filina E.A.; Mikhaleva A.I.; Skotheim T.A.; Trofimov B.A.

DC electrical conductivity of some oligoazomethines
pp. 777-788(12)
Authors: El-Shekeil A.; Al-Aghbari S.

Synthesis of poly(arylene disulfide)–vermiculite nanocomposites via in situ ring-opening polymerization of macrocyclic oligomers
pp. 789-793(5)
Authors: Du X.; Xiao M.; Meng Y.; Hay A.S.

Equilibrium swelling and solvation studies on crosslinked polyacrylamides
pp. 794-801(8)
Authors: Joseph M.; Mathew T.; S D.; Chen Y.; Kuriakose S.

Infrared study on in situ polymerization of zinc dimethacrylate in poly(-octylene-co-ethylene) elastomer
pp. 802-808(7)
Authors: Lu Y.; Liu L.; Shen D.; Yang C.; Zhang L.

Influence of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) on miscibility and properties of atactic poly(methyl methacrylate)
pp. 809-814(6)
Authors: Cimmino S.; D'Alma E.; Di Lorenzo M.; Silvestre C.

Self-assembled ultra-thin films fabricated from diazoresin and phenol–formaldehyde resin via H-bonding interaction
pp. 815-819(5)
Authors: Yang Z.; Chen J.; Cao W.

Introduction to plastic recycling. Vannessa Goodship. Rapra Technology Limited (www.rapra.net), Shrewsbury, Shropshire, UK, 2001. pp 110, ISBN 1-85957-293-6
pp. 820-820(1)
Author: Hiorns R.C.