Polymer International

Polymers in the Third Millennium
pp. 823-823(1)
Authors: Schue F.; Cooney S.

Supramolecular polymer chemistry—scope and perspectives
pp. 825-839(15)
Author: Lehn J-M.

Degradable polymers in a living environment: where do you end up?
pp. 840-844(5)
Authors: Vert M.; Santos I.D.; Ponsart S.; Alauzet N.; Morgat J-L.; Coudane J.; Garreau H.

Improvement of the mechanical properties of poly(D,L-lactide) by orientation
pp. 845-851(7)
Authors: Grijpma D.W.; Altpeter H.; Bevis M.J.; Feijen J.

Morphology and enzymatic degradation of poly(-caprolactone) single crystals: does a polymer single crystal consist of micro-crystals?
pp. 852-858(7)
Authors: Iwata T.; Doi Y.

Ring-opening copolymerization of racemic -butyrolactone with -caprolactone and -valerolactone by distannoxane derivative catalysts: study of the enzymatic degradation in aerobic media of obtained copolymers
pp. 859-866(8)
Authors: Arcana M.; Giani-Beaune O.; Schue R.; Schue F.; Amass W.; Amass A.

Novel hydrogels based on methacrylate-modified agarose
pp. 867-870(4)
Authors: Paepe I.D.; Declercq H.; Cornelissen M.; Schacht E.

Tissue engineering matrixes by emulsion templating
pp. 871-881(11)
Authors: Busby W.; Cameron N.R.; Jahoda C.A.B.

Bulk and surface modification of silicone rubber for biomedical applications
pp. 882-888(7)
Authors: Abbasi F.; Mirzadeh H.; Katbab A-A.

Preparation of N,N-dilauryl chitosan Langmuir–Blodgett film
pp. 889-891(3)
Authors: Li M.; Xin M.; Miyashita T.

Hepatic targeting of macromolecular MRI contrast agents
pp. 892-898(7)
Authors: Yan G-P.; Zhuo R-X.; Xu M-Y.; Zhang X.; Li L-Y.; Liu M-L.; Ye C-H.

Biosynthesis of biodegradable polyesters from renewable carbon sources by recombinant bacteria
pp. 899-906(8)
Authors: Taguchi S.; Matsusaki H.; Matsumoto K.; Takase K.; Taguchi K.; Doi Y.

Effect of photo-initiators on melt degradation of polypropylene and starch-filled polymer
pp. 907-911(5)
Authors: Bagheri R.; Naimian F.

Structured degradable poly(ether) hydrogels based on linear bifunctional macromonomers
pp. 912-922(11)
Authors: Naraghi K.; Sahli N.; Belbachir M.; Franta E.; J Lutz P.

New advances in poly(ethylene terephthalate) polymerization and degradation
pp. 923-930(8)
Author: MacDonald W.A.

Direct visualization of microstructures in hydrophobically modified polyacrylamide aqueous solution by environmental scanning electron microscopy
pp. 931-938(8)
Authors: Feng Y.; Luo P.; Luo C.; Yan Q.

Effects of NaCl on steady rheological behaviour in aqueous solutions of hydrophobically modified polyacrylamide and its partially hydrolyzed analogues prepared by post-modification
pp. 939-947(9)
Authors: Feng Y.; Grassl B.; Billon L.; Khoukh A.; François J.

Synthetic polyamines as vectors for gene delivery
pp. 948-957(10)
Authors: Dubruel P.; De Strycker J.; Westbroek P.; Bracke K.; Temmerman E.; Vandervoort J.; Ludwig A.; Schacht E.

Study of sodium dodecyl sulfate/poly(propylene oxide) methacrylate mixed micelles for the synthesis of thermo-associative polymers by micellar polymerization
pp. 958-965(8)
Authors: Bastiat G.; Grassl B.; François J.

Membrane with incorporated hydrophobic ligand for hydrophobic interaction with proteins: application to lipase adsorption
pp. 966-972(7)
Authors: Bayramolu G.; Denizli A.; Arca M.Y.

Elementary mechanisms of metallocene activation by methylaluminoxane cocatalysts for olefin polymerization
pp. 973-977(5)
Authors: Pédeutour J-N.; Radhakrishnan K.; Cramail H.; Deffieux A.

-OH polystyrene and -OH poly(n-butyl acrylate) as reactive stabilizers for the preparation of uniform polyurethane particles in a dispersed medium
pp. 978-985(8)
Authors: Cloutet E.; Radhakrishnan B.; Cramail H.

Diene/olefin/polar monomer copolymerisation: unprecedented functional polymers from a rare earth catalyst
pp. 986-993(8)
Authors: Bonnet F.; Barbier-Baudry D.; Dormond A.; Visseaux M.

Ethylene polymerization by iron complexes with symmetrical and unsymmetrical ligands
pp. 994-997(4)
Authors: Ma Z.; Sun W-H.; Li Z-L.; Shao C-X.; Hu Y-L.; Li X-H.

Hyperbranched macromolecules through donor-acceptor type copolymerization of allyl–vinylene bifunctional monomers
pp. 998-1012(15)
Author: Rzaev Z.M.O.

Preparation and properties of acrylic polymers/titania hybrid materials prepared by the in situ sol–gel process
pp. 1013-1022(10)
Authors: Perrin F.X.; Nguyen V.N.; Vernet J.L.

Synthesis of poly{[(2-oxo-1,3-dioxolan-4-yl)-methyl vinyl ether]-co-acrylonitrile} and its miscibility with SAN
pp. 1023-1030(8)
Authors: Ha C-S.; Yoo G.; Park D-W.; Jo N-J.; Lee J-K.; Cho W-J.

Preliminary study of the non-emissive thermal rearrangement of novel N-cyanates to rigid rod polymers
pp. 1031-1036(6)
Authors: Hay J.N.; Martin P.S.; Bird C.W.; Hormozi N.

From prebiotic macromolecules to synthetic polypeptides: a new, efficient synthesis of -amino acid N-carboxyanhydrides (NCAs)
pp. 1037-1040(4)
Authors: Boiteau L.; Collet H.; Lagrille O.; Taillades J.; Vayaboury W.; Giani O.; Schué F.; Commeyras A.

Production of polyether polyols using caesium as catalyst
pp. 1041-1046(6)
Authors: de Lucas A.; Rodríguez L.; Pérez-Collado M.; Sánchez P.

Carbene polymerization: characterization of poly(carballyloxycarbene)
pp. 1047-1049(3)
Authors: Liu L.; Song Y.; Li H.

Modification of poly(styrene-co-divinylbenzene) resin by grafting on an aluminium selective ligand
pp. 1050-1057(8)
Authors: Boudenne J-L.; Boussetta S.; Brach-Papa C.; Branger C.; Margaillan A.; Théraulaz F.

Monomers reactivity ratios of fluorinated acrylates–styrene copolymers
pp. 1058-1062(5)
Authors: Saïdi S.; Guittard F.; Géribaldi S.

Surface modification of polyimide film by ion implantation
pp. 1063-1065(3)
Authors: Kim J-T.; Park J-K.; Lee D-C.

Synthesis of polyols by anionic polymerization: determination of kinetic parameters of propylene oxide polymerization using caesium and potassium alcoholates
pp. 1066-1071(6)
Authors: de Lucas A.; Rodríguez L.; Pérez-Collado M.; Sánchez P.; Rodríguez J.F.

A kinetic study of the copolymerization of substituted anilines by ¹H NMR
pp. 1072-1078(7)
Authors: Mav I.; igon M.

Thermally stable and high molecular weight poly(propylene carbonate)s from carbon dioxide and propylene oxide
pp. 1079-1085(7)
Authors: Zhu Q.; Meng Y.Z.; Tjong S.C.; Zhao X.S.; Chen Y.L.

Polymers with benzofuro-benzofuran structures
pp. 1086-1099(14)
Authors: Pourabas B.; Banihashemi A.

Dynamic mechanical analysis of an epoxy/thermoplastic blend: polymerization-induced phase separation
pp. 1100-1106(7)
Authors: López J.; Ramírez C.; Abad M.J.; Barral L.; Cano J.; Díez F.

Grafting on polysilanes using atom transfer radical polymerisation
pp. 1107-1110(4)
Authors: dos Santos C.G.; Parker J.; Jones R.G.; Holder S.J.

Formation of polyacrylate brushes on silica surfaces
pp. 1111-1116(6)
Authors: Parvole J.; Billon L.; Montfort J.P.

Reversible addition-fragmentation chain-transfer (RAFT) copolymerization of vinylidene chloride and methyl acrylate
pp. 1117-1122(6)
Authors: Severac R.; Lacroix-Desmazes P.; Boutevin B.

Synthesis and properties of biodegradable chitin-graft-poly(L-lactide) copolymers
pp. 1123-1128(6)
Authors: Kim J.Y.; Ha C.S.; Jo N.J.

Synthesis and characterization of a polymer–metal complex from bisphenol A polyhydroxy ether with sulfur-bearing side-groups
pp. 1129-1134(6)
Authors: Zhang H.; Ma H.; Li H.; Wang J.

Calendar of meetings
pp. 1135-1138(4)