Skip to main content

Study on Abrasion Resistance of UV Curing System

Buy Article:

$12.00 plus tax (Refund Policy)

UV curing technology, with high efficiency, energy saving, environmental protection and other advantages, has rapidly developed into a new technology in digital imaging area. In order to avoid the printing graphic damaged during the circulation of printing press, the requirement of the rub resistance of UV curing system is higher and higher. Aiming to explore the rub resistance of UV-curable systems, different samples were prepared by changing the types and content of the prepolymer, reactive monomer and anti-abrasion, using the principles of the mass loss method abrasion meter test samples after curing wearable, analyze the effect of the variety and the content of prepolymer, reactive monomer and the type of wear-resistant additives on the rub resistance of UV-curable systems. The best abrasion UV curing system was determined by formulations experimental method. The results show that:The prepolymer and wear-resisting additives have great influence on the abrasion resistance of UV-curable systems. The active monomer, which can improve the rub resistance of the UV contribute to varnish, has certain influence on the UV-curable systems. The result is suitable for all the UV-curable systems, and it will contribute to the improvement of wear resistance of UV curing system.
No Reference information available - sign in for access.
No Citation information available - sign in for access.
No Supplementary Data.
No Data/Media
No Metrics

Document Type: Research Article

Publication date: 2013-01-01

More about this publication?
  • For more than 30 years, IS&T's series of digital printing conferences have been the leading forum for discussion of advances and new directions in 2D and 3D printing technologies. A comprehensive, industry-wide conference that brings together industry and academia, this meeting includes all aspects of the hardware, materials, software, images, and applications associated with digital printing systems?particularly those involved with additive manufacturing and fabrication?including bio-printing, printed electronics, page-wide, drop-on-demand, desktop and continuous ink jet, toner-based systems, and production digital printing, as well as the engineering capability, optimization, and science involved in these fields. In 2016, the conference changed its name formally to Printing for Fabrication to better reflect the content of the meeting and the evolving technology of printing.

    Please note: For purposes of its Digital Library content, IS&T defines Open Access as papers that will be downloadable in their entirety for free in perpetuity. Copyright restrictions on papers vary; see individual paper for details.

  • Information for Authors
  • Submit a Paper
  • Subscribe to this Title
  • Membership Information
  • Terms & Conditions
  • Ingenta Connect is not responsible for the content or availability of external websites
  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more