Standardization of The Blow-off Charge Measurement Procedure and Standard Developer
Abstract:The Imaging Society of Japan (ISJ) Technical Committee part III meeting (The technical committee of toner-based material) standardized the blow-off toner charge measurement procedure, and released the standard twocomponent developer for the procedure. According to the standard procedure, the dispersion of the measured amount of toner charge (q/m) in the same two-component developer is minimized even when different operators measure the charge with different types of Faraday-cages. The obtained q/m according to the standardized procedure can be treated as a reproducible common value which can be obtained by everybody. The standard two-component developer can be used not only for calibrating Faraday-cages or blow-off measuring apparatuses, but also for carrying out quality control in the manufacturing of toner and carrier.
Document Type: Research Article
Publication date: January 1, 2002
For more than 25 years, NIP has been the leading forum for discussion of advances and new directions in non-impact and digital printing technologies. A comprehensive, industry-wide conference, this meeting includes all aspects of the hardware, materials, software, images, and applications associated with digital printing systems, including drop-on-demand ink jet, wide format ink jet, desktop and continuous ink jet, toner-based electrophotographic printers, production digital printing systems, and thermal printing systems, as well as the engineering capability, optimization, and science involved in these fields.
Since 2005, NIP has been held in conjunction with the Digital Fabrication Conference.
- Information for Authors
- Submit a Paper
- Subscribe to this Title
- Membership Information
- Terms & Conditions
- Ingenta Connect is not responsible for the content or availability of external websites