Smart Materials and Structures

A finite element approach for modelling multilayer unimorph dielectric elastomer actuators with inhomogeneous layer geometry
pp. 32001-32011(11)
Authors: Araromi, Oluwaseun A.; Burgess, Stuart C.

Rate-dependent response of superelastic Cu-Al-Mn alloy rods to tensile cyclic loads
pp. 32002-32008(7)
Authors: Araki, Yoshikazu; Maekawa, Nao; Omori, Toshihiro; Sutou, Yuji; Kainuma, Ryosuke; Ishida, Kiyohito

Visible microactuation of a ferromagnetic shape memory alloy by focused laser beam
pp. 32003-32006(4)
Authors: Hu, Zhibin; Kanth, B Rajini; Tamang, Rajesh; Varghese, Binni; Sow, Chorng-Haur; Mukhopadhyay, P.K.

A novel porous magnetorheological elastomer: preparation and evaluation
pp. 35001-35010(10)
Authors: Ju, B.X.; Yu, M.; Fu, J.; Yang, Q.; Liu, X.Q.; Zheng, X.

Asymptotic multiphysics modeling of composite slender structures
pp. 35002-35012(11)
Authors: Wang, Qi; Yu, Wenbin

Design and test of a novel isolator with negative resistance electromagnetic shunt damping
pp. 35003-35011(9)
Authors: Yan, Bo; Zhang, Xinong; Niu, Hongpan

Shape memory composites based on glass-fibre-reinforced poly(ethylene)-like polymers
pp. 35004-35012(9)
Authors: Cuevas, J.M.; Rubio, R.; Laza, J.M.; Vilas, J.L.; Rodriguez, M.; León, L.M.

Investigation of a MEMS piezoelectric energy harvester system with a frequency-widened-bandwidth mechanism introduced by mechanical stoppers
pp. 35005-35016(12)
Authors: Liu, Huicong; Lee, Chengkuo; Kobayashi, Takeshi; Cho Jui Tay,; Quan, Chenggen

Systematic design of a magneto-rheological fluid embedded pneumatic vibration isolator subject to practical constraints
pp. 35006-35020(15)
Authors: Zhu, Xiaocong; Cheng, Li; Jing, Xingjian

A micro-mechanical resonator with programmable frequency capability
pp. 35007-35015(9)
Authors: Merced, Emmanuelle; Cabrera, Rafmag; Dávila, Noraica; Fernández, Félix E.; Sepúlveda, Nelson

Microstructure analysis and damage patterns of thermally cycled Ti-49.7Ni (at.%) wires
pp. 35008-35019(12)
Authors: Karhu, Marjaana; Lindroos, Tomi

A probabilistic framework for acoustic emission source localization in plate-like structures
pp. 35009-35024(16)
Authors: Niri, E Dehghan; Salamone, S.

Characterization and design of antagonistic shape memory alloy actuators
pp. 35010-35017(8)
Authors: Georges, T.; Brailovski, V.; Terriault, P.

Experimental and numerical studies on the sensitivity of carbon fibre/silicone rubber composite sensors
pp. 35011-35015(5)
Authors: Yang, Lili; Ge, Yong; Zhu, Qinghua; Zhang, Ce; Wang, Zongpeng; Liu, Penghuan

Towards holonomic electro-elastomer actuators with six degrees of freedom
pp. 35012-35020(9)
Authors: Conn, A.T.; Rossiter, J.

Electrical sensing properties of carbon fiber reinforced plastic strips for detecting low-level strains
pp. 35013-35019(7)
Authors: Huang, Huang; Yang, Caiqian; Wu, Zhishen

Autonomous healing materials based on epoxidized natural rubber and ethylene methacrylic acid ionomers
pp. 35014-35020(7)
Authors: Md Arifur Rahman,; Penco, Maurizio; Peroni, Isabella; Ramorino, Giorgio; Janszen, Gerardus; Luca Di Landro,

Waste heat energy harvesting using the Olsen cycle on 0.945Pb(Zn_1/3Nb_2/3)O₃- 0.055PbTiO₃ single crystals
pp. 35015-35024(10)
Authors: McKinley, Ian M.; Kandilian, Razmig; Pilon, Laurent

Concurrent attenuation of, and energy harvesting from, surface vibrations: experimental verification and model validation
pp. 35016-35027(12)
Author: Harne, Ryan L.

Disclosed dielectric and electromechanical properties of hydrogenated nitrile-butadiene dielectric elastomer
pp. 35017-35022(6)
Authors: Yang, Dan; Tian, Ming; Dong, Yingchao; Liu, Haoliang; Yu, Yingchun; Zhang, Liqun

Development of a PZT-based wireless digital monitor for composite impact monitoring
pp. 35018-35027(10)
Authors: Liu, Peipei; Yuan, Shenfang; Qiu, Lei

Frequency tuning of piezoelectric energy harvesters by magnetic force
pp. 35019-35026(8)
Authors: Al-Ashtari, Waleed; Hunstig, Matthias; Hemsel, Tobias; Sextro, Walter

Flutter of buckled shape memory alloy reinforced laminates
pp. 35020-35030(11)
Authors: Kuo, Shih-Yao; Shiau, Le-Chung; Lai, Chin-Hsin

Piezoelectric buckled beams for random vibration energy harvesting
pp. 35021-35031(11)
Authors: Cottone, F.; Gammaitoni, L.; Vocca, H.; Ferrari, M.; Ferrari, V.

Adhesion of nickel-titanium shape memory alloy wires to thermoplastic materials: theory and experiments
pp. 35022-35038(17)
Authors: Antico, F.C.; Zavattieri, P.D.; Hector, L.G.; Mance, A.; Rodgers, W.R.; Okonski, D.A.

Processing and formulation of inkjet printable conducting polyaniline based ink for low cost, flexible humidity sensors using untreated polymeric substrate
pp. 35023-35027(5)
Authors: Kulkarni, Milind V.; Apte, Sanjay K.; Naik, Sonali D.; Jalindar,; Kale, Bharat B.

Damage detection strategies based on propagation of guided elastic waves
pp. 35024-35041(18)
Authors: Żak, A.; Radzieński, M.; Krawczuk, M.; Ostachowicz, W.

Multiscale modeling for ferroelectric materials: identification of the phase-field model's free energy for PZT from atomistic simulations
pp. 35025-35038(14)
Authors: Völker, Benjamin; Landis, Chad M.; Kamlah, Marc

Energetic optimization of a piezo-based touch-operated button for man-machine interfaces
pp. 35026-35033(8)
Authors: Sun, Hao; J, Theo; Rene de Vries,; Harry van Dalen,

Characterization of hydrofoil damping due to fluid-structure interaction using piezocomposite actuators
pp. 35027-35035(9)
Authors: Seeley, Charles; Coutu, André; Monette, Christine; Nennemann, Bernd; Marmont, Hugues

Two-way actuation behavior of shape memory polymer/elastomer core/shell composites
pp. 35028-35034(7)
Authors: Kang, Tae-Hyung; Lee, Jeong-Min; Yu, Woong-Ryeol; Youk, Ho; Hee Wook Ryu,

Wireless guided wave and impedance measurement using laser and piezoelectric transducers
pp. 35029-35038(10)
Authors: Park, Hyun-Jun; Sohn, Hoon; Yun, Chung-Bang; Chung, Joseph; Lee, Michael M.S.

Corrigendum: Effect of notches on the behavior of superelastic round-bar NiTi-specimens
pp. 39501-79001(39501)
Authors: Olsen, J.S.; Zhang, Z.L.; Hals, J.K.; Lu, H.