Smart Materials and Structures

A generic approach for producing various protrusive shapes on different size scales using shape-memory polymer
pp. N47-N50(4)
Authors: Liu, N.; Phee, S.J.; Fan, H.; Chew, K.L.; Huang, W.M.

Robust control of a shape memory alloy wire actuated flap
pp. N51-N57(7)
Authors: Ning,; Song, Gangbing

Review of modeling electrostatically actuated microelectromechanical systems
pp. R23-R31(9)
Authors: Batra, R.C.; Porfiri, M.; Spinello, D.

Temperature- and load-sensing via acoustic emission of shape memory alloy particles
pp. 1989-1996(8)
Authors: Kato, Hiroyuki; Sasaki, Kazuaki; Nakao, Shuichi

Curvature effects on buckling of double-walled carbon nanotubes under combined axial compression and lateral pressure
pp. 1997-2005(9)
Authors: Qian, H.; Xu, K.Y.

Acoustic transmission control using active panels: an experimental study of its limitations and possibilities
pp. 2006-2014(9)
Authors: Yu, Xun; Zhu, Hong; Rajamani, Rajesh; Stelson, Kim A.

The dynamic coupling and power flow in asymmetric piezoelectric bending actuators
pp. 2015-2025(11)
Authors: Wolf, K.; Stoeber, B.; Sattel, T.

A piezoelectric higher-order plate element for the analysis of multi-layer smart composite laminates
pp. 2026-2039(14)
Authors: Balamurugan, V.; Narayanan, S.

A frequency agile stacked annular ring microstrip antenna using a Gunn diode
pp. 2040-2045(6)
Authors: Ansari, J.A.; Ram Brij Ram,; Satya Kesh Dubey,; Singh, Prabhakar

A modal actuator-based single-layer piezoelectric transformer for coilless soft switching inverters
pp. 2046-2055(10)
Authors: Yao Tien Huang,; Wen Jong Wu,; Yu Yuan Chen,; Chih Kung Lee,

Effect of CFRC layers on the electrical properties and failure mode of RC beams strengthened with CFRC composites
pp. 2056-2062(7)
Authors: Wu, Sigang; Dai, Hongzhe; Wang, Wei

Development of a magnetostrictive drive rotary motor driven by circular parallel movement
pp. 2063-2066(4)
Authors: Zhou, Jianjun; Huang, Min; Wang, Xiaojian; Song, Wenjie

A hierarchical data fusion scheme for identifying multi-damage in composite structures with a built-in sensor network
pp. 2067-2079(13)
Authors: Su, Zhongqing; Wang, Xiaoming; Chen, Zhiping; Ye, Lin

Development of a numerical model for high-temperature shape memory alloys
pp. 2080-2090(11)
Authors: DeCastro, J.A.; Melcher, K.J.; Noebe, R.D.; Gaydosh, D.J.

Modeling of the cyclic thermomechanical response of SMA wires at different strain rates
pp. 2091-2101(11)
Authors: Kadkhodaei, M.; Rajapakse, R.K.N.D.; Mahzoon, M.; Salimi, M.

Phase diagram kinetics for shape memory alloys: a robust finite element implementation
pp. 2102-2115(14)
Authors: Gao, Xiujie; Qiao, Rui; Brinson, L Catherine

Frequency-wavenumber domain filtering for improved damage visualization
pp. 2116-2129(14)
Author: Ruzzene, M.

Maximum mechanical energy harvesting strategy for a piezoelement
pp. 2130-2136(7)
Authors: Liu, W.Q.; Feng, Z.H.; He, J.; Liu, R.B.

Development of an impedance-based wireless sensor node for structural health monitoring
pp. 2137-2145(9)
Authors: Mascarenas, David L.; Todd, Michael D.; Park, Gyuhae; Farrar, Charles R.

Adaptive landing gear concept—feedback control validation
pp. 2146-2158(13)
Authors: Mikulowski, Grzegorz M.; Holnicki-Szulc, Jan

Optimization of active-passive damping treatments using piezoelectric and viscoelastic materials
pp. 2159-2168(10)
Author: Trindade, M.A.

Synthesis and characterization of stimuli-responsive poly(acrylic acid) grafted silica nanoparticles
pp. 2169-2174(6)
Authors: Jiang, Lizhong; Gao, Qiushuang; Yu, Yun; Wu, Zhanpeng; Wang, Wencai; Yang, Wantai; Jin, Riguang; Wu, Dezhen

A flap-type hydrogel actuator with fast responses to temperature
pp. 2175-2182(8)
Authors: Kato, Shinji; Zhang, Yaopeng; Anazawa, Takanori

Dynamic response analysis and vibration control of a cantilever beam with a squeeze-mode electrorheological damper
pp. 2183-2189(7)
Authors: Pahlavan, L.; Rezaeepazhand, J.

Active vibration suppression of smart laminated beams using layerwise theory and an optimal control strategy
pp. 2190-2201(12)
Authors: Zabihollah, A.; Sedagahti, R.; Ganesan, R.

Investigation of vibration mitigation of stay cables incorporated with superelastic shape memory alloy dampers
pp. 2202-2213(12)
Authors: Liu, Min; Li, Hui; Song, Gangbing; Ou, Jinping

New biosensors made of specially designed transparent chips with nano-optical tags
pp. 2214-2221(8)
Authors: Liu, Shaomin; Zhi Ping Xu,; Yu, Aimin; Su, Haibin; Liu, Lihong

Electro-induced protein deposition on low-fouling surfaces
pp. 2222-2228(7)
Authors: Cole, M.A.; Voelcker, N.H.; Thissen, H.

Enhanced lower-order shear deformation theory for fully coupled electro-thermo-mechanical smart laminated plates
pp. 2229-2241(13)
Authors: Oh, Jinho; Cho, Maenghyo; Kim, Jun-Sik

Geometry optimization of MR valves constrained in a specific volume using the finite element method
pp. 2242-2252(11)
Authors: Nguyen, Quoc-Hung; Han, Young-Min; Choi, Seung-Bok; Wereley, Norman M.

An improved analysis of the SSHI interface in piezoelectric energy harvesting
pp. 2253-2264(12)
Authors: Shu, Y.C.; Lien, I.C.; Wu, W.J.

Geometrically nonlinear finite element simulation of smart piezolaminated plates and shells
pp. 2265-2274(10)
Authors: Lentzen, S.; Klosowski, P.; Schmidt, R.

Development of a resonant trailing-edge flap actuation system for helicopter rotor vibration control
pp. 2275-2285(11)
Authors: Wang, K.W.; Smith, E.C.; Kim, J-S

An electrode model for ionic polymer-metal composites
pp. 2286-2295(10)
Authors: Seong Jun Kim,; Kim, Sang-Mun; Kim, Kwang J.; Yong Hyup Kim,

Nonlinear bending characteristics and sound pressure level of functionally graded piezoelectric actuators under AC electric fields: simulation and experiment
pp. 2296-2301(6)
Authors: Shindo, Yasuhide; Narita, Fumio; Nakagawa, Jun

Fabrication and testing of a poly(vinylidene fluoride) (PVDF) microvalve for gas flow control
pp. 2302-2307(6)
Authors: Wiederkehr, Rodrigo S.; Salvadori, Maria C.; Brugger, Juergen; Degasperi, Francisco T.; Cattani, Mauro

A 2-DOF convective micro accelerometer with a low thermal stress sensing element
pp. 2308-2314(7)
Authors: Van Thanh Dau,; Dzung Viet Dao,; Sugiyama, Susumu

Active control of thermally induced distortion in composite structures using Macro Fiber Composite actuators
pp. 2315-2322(8)
Authors: Jullière, B.; Dano, M-L

Feasibility study of an MR damper-based smart passive control system employing an electromagnetic induction device
pp. 2323-2329(7)
Authors: Choi, Kang-Min; Jung, Hyung-Jo; Lee, Heon-Jae; Cho, Sang-Won

Thermo-mechanical behavior of epoxy shape memory polymer foams
pp. 2330-2340(11)
Authors: Prima, M A Di; Lesniewski, M.; Gall, K.; McDowell, D.L.; Sanderson, T.; Campbell, D.

Parameter estimation of the Bouc-Wen hysteresis model using particle swarm optimization
pp. 2341-2349(9)
Authors: Ye, Meiying; Wang, Xiaodong

Synthesis of Se nanospheres and PbSe nanoshells in solution under refluxing and stirring
pp. 2350-2353(4)
Authors: Gao, Shiyong; Liu, Donghua; Xu, Dan; Li, Dongmei; Hong, Youliang; Chen, Haiyong; Dai, Quanqin; Kan, Shihai; Li, Hongdong; Zou, Guangtian

Development of a piezoelectric multi-axis stage based on stick-and-clamping actuation technology
pp. 2354-2367(14)
Authors: Sang Won Lee,; Ahn, Kyoung-Gee; Ni, Jun

Design, manufacture and testing of self-sensing carbon fibre-glass fibre reinforced polymer rods
pp. 2368-2374(7)
Authors: Nanni, F.; Ruscito, G.; Forte, G.; Gusmano, G.

Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials
pp. 2375-2387(13)
Authors: Seung Bum Kim,; Sohn, Hoon

Magnetic shape memory alloys for forced vibration control of beam-like structures
pp. 2388-2397(10)
Authors: Majewska, K.; Zak, A.; Ostachowicz, W.

LQR control and judicious sensor placement derived from functional gain analysis for a 1D active membrane
pp. 2398-2407(10)
Author: Ruggiero, Eric J.

On graded elements for multiphysics applications
pp. 2408-2428(21)
Authors: Silva, Emílio C.N.; Carbonari, Ronny C.; Paulino, Glaucio H.

Magnetorheological landing gear: 1. A design methodology
pp. 2429-2440(12)
Authors: Batterbee, D.C.; Sims, N.D.; Stanway, R.; Wolejsza, Zbigniew

Magnetorheological landing gear: 2. Validation using experimental data
pp. 2441-2452(12)
Authors: Batterbee, D.C.; Stanway, R.; Rennison, M.; Sims, N.D.

Self-assembly method for the preparation of near-infrared fluorescent spider silk coated with CdTe nanocrystals
pp. 2453-2456(4)
Authors: Chu, Maoquan; Sun, Ye

Robust control of ionic polymer-metal composites
pp. 2457-2463(7)
Authors: Kang, Sunhyuk; Shin, Jongho; Seong Jun Kim,; Kim, H Jin; Yong Hyup Kim,

Material characteristics of TRIP steel with self-diagnosis and application to structural systems
pp. 2464-2476(13)
Authors: Kaneko, Y.; Kirikoshi, K.; Onishi, K.; Suzuki, T.; Miyamoto, N.; Sumitro, S.

Analysis of the magnetomechanical behavior of MRFs based on micromechanics incorporating a statistical approach
pp. 2477-2485(9)
Authors: Peng, X.; Li, H.

Shape memory effects of molded flexible polyurethane foam
pp. 2486-2491(6)
Authors: Sung Ho Lee,; Moon Kyoung Jang,; Sung Hee Kim,; Byung Kyu Kim,

Thermal protection for a self-sensing piezoelectric control system
pp. 2492-2500(9)
Authors: Simmers, Garnett E.; Sodano, Henry A.; Park, Gyuhae; Inman, Daniel J.

Magnetoelectric coupling and the hydrogen effect on Ni-PZT-Ni trilayers made by electrodeposition
pp. 2501-2504(4)
Authors: Pan, D.A.; Bai, Y.; Chu, W.Y.; Qiao, L.J.

SHM of pipes using torsional waves generated by in situ magnetostrictive tapes
pp. 2505-2515(11)
Authors: Kannan, E.; Maxfield, B.W.; Balasubramaniam, Krishnan

Analytical modeling and active vibration suppression of adaptive composite panels with optimal actuator configurations
pp. 2516-2525(10)
Authors: Yan, Su; Ghasemi-Nejhad, Mehrdad N.

Favorable locations for piezo actuators in plates with good control effectiveness and minimal change in system dynamics
pp. 2526-2542(17)
Authors: Dhuri, K.D.; Seshu, P.

A comparison of methods for the training of NiTi two-way shape memory alloy
pp. 2543-2549(7)
Authors: Luo, H.Y.; Abel, E.W.

Study on reinforced concrete beams strengthened using shape memory alloy wires in combination with carbon-fiber-reinforced polymer plates
pp. 2550-2559(10)
Authors: Li, Hui; Liu, Zhi-qiang; Ou, Jin-ping

Transformation fatigue and stress relaxation of shape memory alloy wires
pp. 2560-2570(11)
Authors: Pappas, P.; Bollas, D.; Parthenios, J.; Dracopoulos, V.; Galiotis, C.

A piezopaint-based sensor for monitoring structure dynamics
pp. 2571-2576(6)
Authors: Lahtinen, R.; Muukkonen, T.; Koskinen, J.; Hannula, S-P; Heczko, O.

Active control of wave propagation in multi-span beams using distributed piezoelectric actuators and sensors
pp. 2577-2594(18)
Authors: Rao, M Seshagiri; Narayanan, S.

A new estimation of direction of arrival algorithm with a special antenna shape
pp. 2595-2599(5)
Authors: Harabi, F.; Changuel, H.; Gharsallah, Ali

Properties of Tb(III) and the copolymer microgel complex
pp. 2600-2604(5)
Authors: Zhao, Haifeng; Huang, Xiaohua; Chen, Mingqing

Topology optimization design of functionally graded bimorph-type piezoelectric actuators
pp. 2605-2620(16)
Authors: Carbonari, Ronny C.; Silva, Emílio C.N.; Paulino, Glaucio H.

Optoelectrochemical properties of poly(5,12-dihydrothieno[3^',4^':2,3][1,4] dioxocino[6,7-b]quinoxaline-co-2,2^' bithiophene) and its electrochromic device application
pp. 2621-2626(6)
Authors: Ak, Metin; Mine Sulak Ak,; Güllü, Mustafa; Toppare, Levent

Structural health monitoring using fiber optic distributed sensors for vacuum-assisted resin transfer molding
pp. 2627-2635(9)
Authors: Eum, S.H.; Kageyama, K.; Murayama, H.; Uzawa, K.; Ohsawa, I.; Kanai, M.; Kobayashi, S.; Igawa, H.; Shirai, T.

A piezoelectric dome-shaped-diaphragm transducer for microgenerator applications
pp. 2636-2644(9)
Author: Feng, Guo-Hua

Microstructures and viscoelastic properties of anisotropic magnetorheological elastomers
pp. 2645-2650(6)
Authors: Chen, L.; Gong, X.L.; Li, W.H.

Microactuators of free-standing TiNiCu films
pp. 2651-2657(7)
Authors: Fu, Y.Q.; Luo, J.K.; Flewitt, A.J.; Ong, S.E.; Zhang, S.; Du, H.J.; Milne, W.I.

Optimal placement of sensors for structural system identification and health monitoring using a hybrid swarm intelligence technique
pp. 2658-2672(15)
Authors: A Rama Mohan Rao,; Anandakumar, Ganesh

A self-assembly mechanism for sol-gel derived ZnO thin films
pp. 2673-2679(7)
Authors: Wang, Jiaheng; Qi, Yang; Zhi, Zhuangzhi; Guo, Jing; Li, Maolin; Zhang, Ying

The optimal location of piezoelectric actuators and sensors for vibration control of plates
pp. 2680-2691(12)
Authors: Kumar, K Ramesh; Narayanan, S.

Author index with titles
pp. 2693-2705(13)