Smart Materials and Structures

Electroactive polymer gels based on epoxy resin
pp. 237-242(6)
Authors: Samui, A.B.; Jayakumar, S.; Jayalakshmi, C.G.; Pandey, K.; Sivaraman, P.

Nonlinear differential ultrafast laser absorption spectroscopy observation of charge carrier dynamics of CdS_xSe_1-x nanocrystal doped glasses
pp. 243-248(6)
Authors: Zhang, F.J.; Zhang, L.M.; Claus, R.O.

Lamb wave propagation modelling for damage detection: I. Two-dimensional analysis
pp. 249-259(11)
Authors: Lee, B.C.; Staszewski, W.J.

Lamb wave propagation modelling for damage detection: II. Damage monitoring strategy
pp. 260-274(15)
Authors: Lee, B.C.; Staszewski, W.J.

Development of an electromechanical admittance approach for application in the vibration control of intelligent structures
pp. 275-281(7)
Authors: Providakis, C.P.; Kontoni, D-P N.; Voutetaki, M.E.

Steady-state analysis of a three-layered electro-magneto-elastic strip in a thermal environment
pp. 282-295(14)
Authors: Kumaravel, A.; Ganesan, N.; Sethuraman, Raju

Stress measurement in a cantilevered silicon beam undergoing coupled motion of torsion and bending
pp. 296-304(9)
Authors: Egretzberger, Markus; Kugi, Andreas; Günthner, Stefan; Hartmann, Bernhard

Active vibration control of a smart beam through piezoelectric actuation and laser vibrometer sensing: simulation, design and experimental implementation
pp. 305-316(12)
Authors: Vasques, C.M.A.; Rodrigues, J Dias

Integrated ultrasonic transducers made by the sol-gel spray technique for structural health monitoring
pp. 317-322(6)
Authors: Kobayashi, M.; Jen, C-K; Moisan, J-F; Mrad, N.; Nguyen, S.B.

Identification of electromechanical modal parameters of linear piezoelectric structures
pp. 323-331(9)
Authors: Porfiri, M.; Maurini, C.; Pouget, J.

Oleophilicity and the strong electrorheological effect of surface-modified titanium oxide nano-particles
pp. 332-339(8)
Authors: Qiao, Yinpo; Yin, Jianbo; Zhao, Xiaopeng

Wrinkling control of inflatable booms using shape memory alloy wires
pp. 340-348(9)
Authors: Yoo, Eun-Jung; Roh, Jin-Ho; Han, Jae-Hung

Effect of size on bulk and surface cohesion energy of metallic nano-particles
pp. 349-354(6)
Authors: Yaghmaee, S.; Shokri, B.

Guided-wave signal processing using chirplet matching pursuits and mode correlation for structural health monitoring
pp. 355-366(12)
Authors: Raghavan, Ajay; Cesnik, Carlos E.S.

Microfabrication of PDMS microchannels using SU-8/PMMA moldings and their sealing to polystyrene substrates
pp. 367-371(5)
Authors: Bubendorfer, Andrea; Liu, Xianming; Ellis, Amanda V.

Numerical simulation of a double SMA wire actuator using the two-way shape memory effect of SMA
pp. 372-381(10)
Authors: Kim, Sanghaun; Cho, Maenghyo

Mechanical reliability of optical fibre sensors and SmartRods for tunnel displacement monitoring
pp. 382-390(9)
Authors: Miao, P.; Kukureka, S.N.; Metje, N.; Chapman, D.N.; Rogers, C.D.F.; Henderson, P.

Measurements of temperature during fatigue of a thermoplastic polymer composite using FBG sensors
pp. 391-398(8)
Authors: Facchini, M.; Sorensen, L.; Botsis, J.

Sensor location studies for damage detection with Lamb waves
pp. 399-408(10)
Authors: Lee, B.C.; Staszewski, W.J.

Development of a multi-degree-of-freedom micropositioning, vibration isolation and vibration suppression system
pp. 409-417(9)
Authors: Jaensch, M.; Lampérth, M.U.

Control of electro-rheological fluid based resistive torque elements for use in active rehabilitation devices
pp. 418-428(11)
Authors: Nikitczuk, Jason; Weinberg, Brian; Mavroidis, Constantinos

Multifunctional layer-by-layer carbon nanotube-polyelectrolyte thin films for strain and corrosion sensing
pp. 429-438(10)
Authors: Loh, Kenneth J.; Kim, Junhee; Lynch, Jerome P.; Nadine Wong Shi Kam,; Kotov, Nicholas A.

Integral resonant control of collocated smart structures
pp. 439-446(8)
Authors: Aphale, Sumeet S.; Fleming, Andrew J.; Moheimani, S O Reza

Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation
pp. 447-454(8)
Authors: Ajitsaria, J.; Choe, S.Y.; Shen, D.; Kim, D.J.

A self-sensing method for switching vibration suppression with a piezoelectric actuator
pp. 455-461(7)
Authors: Makihara, Kanjuro; Onoda, Junjiro; Minesugi, Kenji

An overheight vehicle-bridge collision monitoring system using piezoelectric transducers
pp. 462-468(7)
Authors: Olmi, C.; Gu, H.; Song, G.

Radial vibration of the combination of a piezoelectric ceramic disk and a circular metal ring
pp. 469-476(8)
Author: Lin, Shuyu

Characterization of dielectric elastomer actuators based on a visco-hyperelastic film model
pp. 477-486(10)
Authors: Lochmatter, Patrick; Kovacs, Gabor; Wissler, Michael

Determination of the x-ray elastic constants of solid thin films
pp. 487-492(6)
Authors: Yu, Y.H.; Lai, M.O.; Lu, L.

Studies on electrical properties and the magnetoelectric effect on ferroelectric-rich (x)Ni_0.8Zn_0.2Fe₂O₄+(1-x) PZT ME composites
pp. 493-497(5)
Authors: Chougule, S.S.; Chougule, B.K.

On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages
pp. 498-505(8)
Authors: Guan, M.J.; Liao, W.H.

Dynamic compression testing of a tunable spring element consisting of a magnetorheological elastomer
pp. 506-514(9)
Authors: Kallio, M.; Lindroos, T.; Aalto, S.; Järvinen, E.; Kärnä, T.; Meinander, T.

Impact-induced damage characterization of composite plates using neural networks
pp. 515-524(10)
Authors: Watkins, Steve E.; Akhavan, Farhad; Dua, Rohit; Chandrashekhara, K.; Wunsch, Donald C.

A low power sensor signal processing circuit for implantable biosensor applications
pp. 525-530(6)
Authors: Zhang, Mo; Haider, Mohammad R.; Huque, Mohammad A.; Adeeb, Mohammad A.; Rahman, Shaela; Islam, Syed K.

Nonlinear analysis of cantilever shape memory alloy beams of variable cross section
pp. 531-540(10)
Authors: Muhammad Arefin Kowser,; Muhammad Ashiqur Rahman,