A multi-slot surface coil for MRI of dual-rat imaging at 4 T

Authors: Solis, S.E.; Wang, R.; Tomasi, D.; Rodriguez, A.O.

Source: Physics in Medicine and Biology, Volume 56, Number 12, 21 June 2011 , pp. 3551-3561(11)

Buy & download fulltext article:

Price: $44.11 plus tax (Refund Policy)

Abstract:

A slotted surface coil inspired by the hole-and-slot cavity magnetron was developed for magnetic resonance imaging of obese rats at 4 T. Full-wave analysis of the magnetic field was carried out at 170 MHz for both the slotted and circular-shaped coils. The noise figure values of two coils were investigated via the numerical calculation of the quality factors. Fat simulated phantoms to mimic overweight rats were included in the analysis with weights ranging from 300 to 900 g. The noise figures were 1.2 dB for the slotted coil and 2.4 dB for the circular coil when loaded with 600 g of simulated phantom. A slotted surface coil with eight circular slots and a circular coil with similar dimensions were built and operated in the transceiver mode, and their performances were experimentally compared. The imaging tests in phantoms demonstrated that the slotted surface coil has a deeper RF-sensitivity and better field uniformity than the single-loop RF-coil. High quality images of two overweight Zucker rats were acquired simultaneously with the slotted surface coil using standard spin-echo pulse sequences. Experimental results showed that the slotted surface coil outperformed the circular coil for imaging considerably overweight rats. Thus, the slotted surface coil can be a good tool for MRI experiments in rats on a human whole-body 4 T scanner.

Document Type: Research article

DOI: http://dx.doi.org/10.1088/0031-9155/56/12/007

Publication date: 2011-06-21