Effect of active interference on the performance of radio frequency identification systems
Source: International Journal of Radio Frequency Identification Technology and Applicat, Volume 1, Number 1, 19 August 2006 , pp. 4-23(20)
Publisher: Inderscience Publishers
Abstract:Recent advancements in wireless technology have resulted in an unprecedented demand for Radio Frequency (RF) spectral resources. Increasing frequency reuse also increases RF interference, which decreases a system's capacity and/or service quality. The primary focus of this research was the development of a test protocol for the characterisation of the performance of Radio Frequency Identification (RFID) systems when active interference was present. The test protocol was comprised of four different experiments: Jamming on Central Frequency of Operation, Apply Full Range of Frequencies in Sweeps, Modulating the Jamming Signal and Tag Pollution. The effectiveness of the test protocol was verified by fully characterising eight RFID systems operating at frequencies that ranged from 120 kHz to 2.45 GHz. The performance measure of read rate was utilised to assess whether or not the jamming signal had an effect on the performance of the RFID systems. The results obtained through actual experimentation, as well as the validation by experts in the RFID field, indicate that the approach described in this research is viable and useful for both manufacturers and users of RFID technology.
Document Type: Research Article
Affiliations: 1: Department of Industrial and Manufacturing Engineering, Oregon State University, 110 Covell Hall, Corvallis, OR 97331-2407, USA. 2: University of Texas at Arlington, P.O. Box 19019, 622 Nedderman Hall, Arlington, TX 76019-0019, USA. 3: University of Pittsburgh, 432 Benedum Hall, Pittsburgh, PA 15261, USA
Publication date: August 19, 2006