Performance improvement of TiO2 supported on adsorbents for photocatalytic degradation of MEK in air
Source: International Journal of Environmental Technology and Management, Volume 9, Number 1, 20 April 2008 , pp. 105-124(20)
Publisher: Inderscience Publishers
Abstract:Photocatalytic degradation of Methyl Ethyl Ketone (MEK) was carried out in gas phase using TiO2 supported on different adsorbents. Based on size and surface area, three different adsorbents, montmorillonite, β‐zeolite and MCM‐41 were tested. A fluidised bed annular photoreactor fitted with either 254 or 365 nm lamps was used for the photodegradation studies. The removal rates of MEK were higher for the catalysts supported on the adsorbent as compared to bare TiO2 (Degussa P25 and sol‐gel TiO2) due to both improved adsorption and photocatalytic degradation. The photocatalytic activity of the supported TiO2 was maximum around 50 wt.% loading of TiO2. Among all the adsorbents tested, montmorillonite showed better removal rate than MCM‐41 and β‐zeolite. Some limited experiments were conducted with Trichloroethylene (TCE) to evaluate the effect of polarity of the organic compound on overall degradation using the supported catalysts.
Document Type: Research Article
Affiliations: 1: Department of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, 117576 Singapore. 2: Department of Chemical and Biochemical Engineering, Thompson Engineering Building, Room 443, The University of Western Ontario, London, ON N6A 5B9, Canada
Publication date: 2008-04-20
- The objectives of the International Journal of Environmental Technology and Management are to establish an effective channel of communication between policy-makers, government agencies, academics and research institutions, and professionals working in the field, and to provide a forum for them to disseminate information and to learn from each other's work. The international dimension is emphasised in order to overcome cultural and national barriers and to meet the needs of accelerating technological change and changes in the global economy.
- Information for Authors
- Submit a Paper
- Subscribe to this Title
- Terms & Conditions
- ingentaconnect is not responsible for the content or availability of external websites