Triaxial tests on snow at low strain rate. Part I. Experimental device
Abstract:A deformation-controlled triaxial apparatus has been developed in order to investigate the mechanical behaviour of alpine snow. Cylindrical specimens (58 mm in diameter,126 mm in height) can be axially deformed by applying tensile or compressive strain rates between 2.4×10-7 s-1 and 2.4×10-2 s-1t. Compressed air is used to laterally load the snow specimens with pressures of up to 40 kPa.The volumetric deformation is found by carefully encapsulating the snow samples in an airtight Mylar foil and measuring the expelled pore air during sample deformation. The multidimensional stress-strain behaviour can therefore be determined, and constitutive theories of snow advanced. The device is located in the cold rooms of the Weissfluhjoch research station of the Swiss Federal Institute for Snow and Avalanche Research. Some 180 tests have been performed over the last four winters.The density of the snow specimens varied between 190 and 435 kg m-3. Part I of this two-part paper discusses the development of the apparatus and the applied testing methodology. Qualitative results are provided. In Part II, a detailed analysis of the results is presented and the viscoelastic properties of snow quantified.
Document Type: Research Article
Publication date: 2003-01-01
More about this publication?
- The Journal of Glaciology is published six times per year. It accepts submissions from any discipline related to the study of snow and ice. All articles are peer reviewed. The Journal is included in the ISI Science Citation Index.
Beginning in 2016, content will be available at https://www.cambridge.org/core/journals/journal-of-glaciology.
- Editorial Board
- Information for Authors
- Ingenta Connect is not responsible for the content or availability of external websites