Skip to main content

Decontamination of Knives Used in the Meat Industry: Effect of Different Water Temperature and Treatment Time Combinations on the Reduction of Bacterial Numbers on Knife Surfaces

Buy Article:

$37.00 plus tax (Refund Policy)

Abstract:

Previous regulations in Australia and internationally required that knives used during the slaughter and dressing of carcasses be sanitized by brief submersion in water at 82°C. Many current international regulations allow science-based equivalent alternative procedures to be used. However, limited time-temperature data are available on the response of bacteria to hot-water treatment on knives. The present study was undertaken to determine the effect of combinations of time and temperature ranging from 1 to 60 s and 60 to 82°C on the disinfection of knives artificially contaminated with Escherichia coli and Listeria monocytogenes. In addition, the effect of a prerinse at 40°C on the disinfection of artificially contaminated knives treated under the same controlled conditions as above was established. The experiments, which were carried out with knives in a meat matrix at each of 42 time and temperature combinations, with and without the prerinse, were performed in a laboratory water bath. Bacterial reductions were established by plate counts from the knife blade before and after immersion. Mean log reductions were subjected to statistical analysis, and basic models were generated from the results. The results demonstrated that dipping knives in water for shorter times at higher temperatures, for example, 82°C for 1 s, or longer times at lower temperatures can produce equivalent inactivation of bacteria. Prerinsing knives at 40°C increases the performance of the subsequent dipping step. Models produced from the data in this study can be used to predict suitable combinations of time and temperature to achieve a desired bacterial reduction.

Document Type: Research Article

Affiliations: 1: Food Science Australia, Brisbane Laboratory, Cnr Wynnum and Creek Roads, Cannon Hill, Queensland 4170, Australia; School of Land, Crop and Food Sciences, University of Queensland, Brisbane, Queensland 4072, Australia 2: Food Science Australia, Brisbane Laboratory, Cnr Wynnum and Creek Roads, Cannon Hill, Queensland 4170, Australia

Publication date: 2008-07-01

More about this publication?
  • Access Key
  • Free ContentFree content
  • Partial Free ContentPartial Free content
  • New ContentNew content
  • Open Access ContentOpen access content
  • Partial Open Access ContentPartial Open access content
  • Subscribed ContentSubscribed content
  • Partial Subscribed ContentPartial Subscribed content
  • Free Trial ContentFree trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more