Scripta Materialia

Creep properties of boron-doped dual-phase Ti-rich L1₂-based trialuminide intermetallics
pp. 1409-1414(6)
Authors: Heilmaier M.; Handtrack D.; Varin R.A.

Magnetic field-induced reversible actuation using ferromagnetic shape memory alloys
pp. 1415-1419(5)
Authors: Liang Y.; Sutou Y.; Wada T.; Lee C.-C.; Taya M.; Mori T.

Fatigue properties of 8090 Al-Li alloy processed by equal-channel angular pressing
pp. 1421-1426(6)
Authors: Liu S.M.; Wang Z.G.

Crystal structure and twinning in martensite of Ni_1.96Mn_1.18Ga_0.86 magnetic shape memory alloy
pp. 1427-1432(6)
Authors: Mogylnyy G.; Glavatskyy I.; Glavatska N.; Soderberg O.; Ge Y.; Lindroos V.K.

Synthesis and properties of barium aluminosilicate glass-ceramic composites reinforced with in situ grown Si₃N₄ whiskers
pp. 1433-1438(6)
Authors: Ye F.; Chen S.; Iwasa M.

Tensile properties of a refractory metal base in situ composite consisting of an Nb solid solution and hexagonal Nb₅Si₃
pp. 1439-1444(6)
Authors: Kim J.-H.; Tabaru T.; Hirai H.; Kitahara A.; Hanada S.

The influence of the enthalpy of mixing during the laser deposition of complex titanium alloys using elemental blends
pp. 1445-1450(6)
Authors: Collins P.C.; Banerjee R.; Fraser H.L.

Fine-grain evolution in friction-stir processed 7050 aluminum
pp. 1451-1455(5)
Authors: Rhodes C.G.; Mahoney M.W.; Bingel W.H.; Calabrese M.

Microtextural study of orientation change during nucleation and growth in a cold rolled ULC steel
pp. 1457-1462(6)
Authors: Verbeken K.; Kestens L.; Jonas J.J.

Annealing softening mechanisms operating in cold worked oxide-bearing steels
pp. 1463-1468(6)
Authors: Belyakov A.; Sakai Y.; Hara T.; Kimura Y.; Tsuzaki K.

Synthesis and optical characterization of CdTe nanocrystals prepared by ball milling process
pp. 1469-1474(6)
Authors: Tan G.L.; Hommerich U.; Temple D.; Wu N.Q.; Zheng J.G.; Loutts G.

Theory of nanoindentation creep controlled by interfacial diffusion
pp. 1475-1481(7)
Authors: Klinger L.; Rabkin E.

Deposition of multi-layered alumina-titania coatings by detonation waves
pp. 1483-1488(6)
Authors: Cetegen B.M.; Semenov S.Y.; Goberman D.

FeAl-TiN nanocomposite produced by reactive ball milling and hot-pressing consolidation
pp. 1489-1494(6)
Authors: Krasnowski M.; Kulik T.

A novel ternary eutectic in the Nb-Al-Ni system
pp. 1495-1500(6)
Authors: Triveno Rios C.; Milenkovic S.; Caram R.

Strain-rate effect on dynamic recrystallization at grain boundary in Cu alloy bicrystal
pp. 1501-1505(5)
Authors: Miura H.; Ozama M.; Mogawa R.; Sakai T.

Viscous and delayed-elastic deformation during primary creep-using strain relaxation and recovery test
pp. 1507-1512(6)
Author: Sinha N.K.