Scripta Materialia

Suppression of high temperature embrittlement of Al-5%Mg alloys containing a trace of sodium caused by antimony addition
pp. 1105-1110(6)
Authors: Ueda K.; Horikawa K.; Kanno M.

Atomic jump model for migration of curved grain boundary
pp. 1111-1116(6)
Author: Kim B.-N.

Effect of reinforcements on precipitation behaviour in Al 7075/TiCp composite
pp. 1117-1121(5)
Authors: Sahin A.; Sarioglu F.

Coherent solubility limits of '-type phases in Ni-Al, Ni-Ga and Ni-Ti alloys
pp. 1123-1128(6)
Authors: Li F.; Ardell A.J.

873 K isothermal section of phase diagram for Y-Fe-Ti ternary system
pp. 1129-1134(6)
Authors: Zhongyi L.; Zhanpeng J.; Changqing X.

The effects of oxide additions on the microstructure and r-curve behavior of in-situ reinforced silicon nitride
pp. 1135-1141(7)
Authors: Yang J.; Hirano T.; Sekino T.; Niihara K.

On microstructure at the weldline in injection moulded particulate composites
pp. 1143-1149(7)
Authors: Ogadhoh S.O.; Papathanasiou T.D.

A reaction forming method for joining of silicon carbide-based ceramics
pp. 1151-1154(4)
Author: Singh M.

Ensembles of gliding grain boundary dislocations in ultrafine grained materials produced by severe plastic deformation
pp. 1155-1161(7)
Author: Nazarov A.A.

Effect of nitrogen partial pressure on the surface morphology and properties of reactive DC magnetron sputtered (Ti,Al)N coatings
pp. 1163-1169(7)
Authors: Wuhrer R.; Kim S.; Yeung W.Y.

Hydrogen diffusion in nanocrystalline nickel indicating a structural change within the grain boundaries after annealing
pp. 1171-1175(5)
Authors: Marte C.; Kirchheim R.

An x-ray reflectivity study of -NiAl oxidation
pp. 1177-1183(7)
Authors: Muralidharan G.; Wu X.Z.; You H.; Paulikas A.P.; Veal B.W.

Nucleation of acicular ferrite enhanced by the precipitation of CuS on MnS particles
pp. 1185-1192(8)
Authors: Madariaga I.; Gutierrez I.

Acoustic emission studies on welded and thermally treated AISI 304 stainless steel during tensile deformation
pp. 1193-1198(6)
Authors: Mukherjee P.; Barat P.; Jayakumar T.; Kalyanasundaram P.; Rajagopalan C.; Raj B.

High energy x-ray diffraction measurement of the superstructure reflection (100) for a creep deformed AM1 single crystal superalloy specimen
pp. 1199-1205(7)
Authors: Royer A.; Bastie P.; Veron M.

Motion of planar grain boundaries in bismuth-bicrystals driven by a magnetic field
pp. 1207-1213(7)
Authors: Molodov D.A.; Gottstein G.; Heringhaus F.; Shvindlerman L.S.

Microstructure of incoloy MA956 after low and high temperature deformation
pp. 1215-1220(6)
Authors: Dubiel B.; Wrobel M.; Ennis P.J.; Czyrska-Filemonowicz A.

APFIM and TEM studies of drawn pearlitic wire
pp. 1221-1230(10)
Authors: Read H.G.; Reynolds W.T.; Hono K.; Tarui T.

A role of -ferrite in edge-crack formation during hot-rolling of austenitic stainless steels
pp. 1231-1235(5)
Authors: Czerwinski F.; Brodtka A.; Cho J.Y.; Zielinska-Lipiec A.; Sunwoo J.H.; Szpunar J.A.

On the influence of non-steady state velocity on interlamellae concentration profiles in discontinuous precipitation
pp. 1237-1242(6)
Authors: Klinger L.; Brechet Y.; Duly D.

Strain rate sensitivity of ductility in a Fe-28Al alloy under tensile impact
pp. 1243-1248(6)
Authors: Mingwei C.; Donglian L.; Yuanming X.; Liu C.T.

Fracture resistance of ZrSiO₄/SiC composites between 20^oC and 1450^oC
pp. 1249-1254(6)
Authors: Celemin J.A.; Pastor J.Y.; Llorca J.; Anandakumar U.; Singh R.N.

Characteristics of acoustic emission during stress corrosion cracking of inconel 600 alloy
pp. 1255-1262(8)
Authors: Key Y.S.; In S.K.; Young K.Y.

Wettability and phase formation in the TiC_x/Al system
pp. 1263-1267(5)
Authors: Frumin N.; Frage N.; Polak M.; Dariel M.P.

The semithickness-to-radius ratio of martensitic plates in iron base alloys
pp. 1269-1269(1)
Author: Raghavan V.