Scripta Materialia

Ingot-processed iron carbide (Fe-4.3 wt% C)
pp. 299-303(5)
Authors: Kim W.J.; Sherby O.D.; Nieh T.G.; Frommeyer G.

Superplastic behaviour of a titanium alloy IMI685 under uniaxial compression
pp. 305-309(5)
Authors: Rajagopalachary T.; Kutumbarao V.V.

Intrinsic hot workability map for a titanium alloy IMI685
pp. 311-316(6)
Authors: Rajagopalachary T.; Kutumbarao V.V.

Tensile properties of cast and mechanically alloyed FeAl with high boron content
pp. 317-322(6)
Authors: Kim M.H.; Kwun S.I.

Ductility of sheet metal in the negative minor strain region of forming limit diagrams
pp. 323-326(4)
Authors: Ravishankar C.; Venkadesan S.

HREM study of 45^o [100] quasiperiodic grain boundary in aluminum
pp. 327-331(5)
Authors: Shamsuzzoha M.; Deymier P.A.; Smith D.J.

The structure and deformation behavior of hot-dip galvanized coatings
pp. 333-338(6)
Authors: Maeda C.; Shimomura J.; Fujisawa H.; Konishi M.

A simple test for randomness of the spatial distribution of particles during phase transformations
pp. 339-344(6)
Authors: Charbon C.; Rappaz M.

Two-way shape memory effect in a NiAl-Fe alloy
pp. 345-348(4)
Authors: C. Y.X.; L. W.S.; T. Y.H.

The two way memory effect in TiNi alloys
pp. 349-354(6)
Authors: Filip P.; Mazanec K.

Microstructure evolution in TiAl alloyed with Si
pp. 355-360(6)
Authors: Lanting Z.; Jiansheng W.

Orientational texture due to random anisotropic growth in one dimension
pp. 361-366(6)
Authors: Birnie D.P.; Weinberg M.C.

Microstructural evolution of near- TiAl alloys during long-time heat treatments
pp. 367-372(6)
Authors: Dudzinski D.; Zhao L.; Beddoes J.; Wallace W.

Particle denuded zones in alumina reinforced aluminum matrix composite weldments
pp. 373-378(6)
Authors: Chidambaram A.; Bhole S.D.

A phenomenological model for transient creep behaviors based on the steady state creep properties
pp. 379-384(6)
Authors: Bong S.L.; Soo W.N.; Jun H.H.

A study of twinning in nickel
pp. 385-390(6)
Authors: Thomson C.B.; Randle V.

Spatially varied interfaces
pp. 391-395(5)
Authors: Maruyama B.; Gundel D.B.

Orientation changes inside shear bands occurring in channel-die compressed (112)[111] copper single crystals
pp. 397-403(7)
Authors: Jasienski Z.; Baudin T.; Piatkowski A.; Penelle R.

Laser surface engineering of copper with chromium for enhanced wear resistance
pp. 405-410(6)
Authors: Manna I.; Majumdar J.D.; Chatterjee U.K.; Nath A.K.

Low-temperature tracer diffusion of chromium in Fe - Cr ferritic alloys
pp. 411-416(6)
Authors: Cermak J.; Ruzickova J.; Pokorna A.

The effect of strain path on microstructure and texture development in copper single crystals with (110)[001] and (110)[110] initial orientations
pp. 417-422(6)
Authors: Wrobel M.; Dymek S.; Blicharski M.

The shape memory behavior in 63.8Ni-Al alloy
pp. 423-427(5)
Authors: Potapov P.L.; Poliakova N.A.; Udovenko V.A.

Tensile properties and strain rate sensitivity of Ti-47Al-2Cr-0.2Si sheet material with different microstructures
pp. 429-434(6)
Authors: Clemens H.; Glatz W.; Appel F.

X-ray diffraction study of the reverse martensitic transformation in Cu-Al-Ni-Mn-Ti shape memory alloy
pp. 435-440(6)
Authors: J. G.; W. H.Z.; R. W.; D. Z.; C. H.T.; M. Z.X.; D. Z.Y.

Viscoelastic behavior over a wide range of time and frequency in tin alloys: SnCd and SnSb
pp. 441-447(7)
Authors: Quackenbush J.; Brodt M.; Lakes R.S.

Creep behaviour at high stresses of a Mg-Zn-Ca-Ce-La alloy processed by rapid solidification
pp. 449-454(6)
Authors: Sustek V.; Spigarelli S.; Cadek J.

The influence of deformation on snoek peak in Ta-O system
pp. 455-458(4)
Author: Fang Q.

An experimental model of the growth of neighboring voids during ductile fracture
pp. 459-463(5)
Authors: Goto D.M.; Koss D.A.