Acta Materialia

Calender
pp. I-VI(6)

Structure and properties of ultra-fine grain Cu-Cr-Zr alloy produced by equal-channel angular pressing
pp. 1639-1651(13)
Authors: Vinogradov A.; Patlan V.; Suzuki Y.; Kitagawa K.; Kopylov V.I.

On the development of stage IV hardening using a model based on the mechanical threshold
pp. 1653-1667(15)
Authors: Kok S.; Beaudoin A.J.; Tortorelli D.A.

Temperature dependence of Young's modulus in Si₃N₄-based ceramics: roles of sintering additives and of SiC-particle content
pp. 1669-1682(14)
Authors: Rouxel T.; Sangleboeuf J.-C.; Huger M.; Gault C.; Besson J.-L.; Testu S.

Mechanism of solid-state dissolution of WC in Co-based solutions
pp. 1683-1692(10)
Authors: Lavergne O.; Robaut F.; Hodaj F.; Allibert C.H.

Application of cellular automaton-finite element model to the grain refinement of directionally solidified Al-4.15 wt% Mg alloys
pp. 1693-1705(13)
Authors: Vandyoussefi M.; Greer A.L.

Theory of diffusion induced grain boundary migration: is mass transport along free surfaces important?
pp. 1707-1716(10)
Authors: Brener E.A.; Temkin D.E.

Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel
pp. 1717-1734(18)
Authors: Wang Y.D.; Lin Peng R.; Wang X.-L.; McGreevy R.L.

Determination of the habit plane characteristics in the -' phase transformation induced by stress in Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe
pp. 1735-1740(6)
Authors: Zimmermann F.; Humbert M.

Modelling of the variant selection mechanism in the phase transformation of HSLA steel produced by compact strip production
pp. 1741-1747(7)
Authors: Humbert M.; Gardiola B.; Esling C.; Flemming G.; Hensger K.E.

Mechanical behavior of a bulk Cu-Ti-Zr-Ni-Si-Sn metallic glass forming nano-crystal aggregate bands during deformation in the supercooled liquid region
pp. 1749-1759(11)
Authors: Bae D.H.; Lim H.K.; Kim S.H.; Kim D.H.; Kim W.T.

Direct observation of carbon-decorated defects in fatigued type 304 stainless steel using positron annihilation spectroscopy
pp. 1761-1770(10)
Authors: Asoka-Kumar P.; Hartley J.H.; Howell R.H.; Sterne P.A.; Akers D.; Shah V.; Denison A.

Strain tensor development in a single grain in the bulk of a polycrystal under loading
pp. 1771-1779(9)
Authors: Margulies L.; Lorentzen T.; Poulsen H.F.; Leffers T.

Microstructure of duplex-phase NbSi₂(C40)/MoSi₂(C11_b) crystals containing a single set of lamellae
pp. 1781-1795(15)
Authors: Nakano T.; Nakai Y.; Maeda S.; Umakoshi Y.

Solidification structure formation in undercooled Fe-Ni alloy
pp. 1797-1807(11)
Authors: Li J.F.; Jie W.Q.; Yang G.C.; Zhou Y.H.

Coherent phase equilibria in a bending film
pp. 1809-1824(16)
Authors: Roytburd A.; Slutsker J.

Influence of primary annealing condition on texture development in grain oriented electrical steels
pp. 1825-1834(10)
Authors: Park J.Y.; Han K.S.; Woo J.S.; Chang S.K.; Rajmohan N.; Szpunar J.A.

EBSD and TEM study of self-accommodating martensites in Cu_75.7Al_15.4Mn_8.9 shape memory alloy
pp. 1835-1847(13)
Authors: Wang R.; Gui J.; Chen X.; Tan S.

Application of the Lamel model for simulating cold rolling texture in molybdenum sheet
pp. 1849-1856(8)
Authors: Liu Y.S.; Delannay L.; Van Houtte P.

Oxidation mechanisms in Mo-reinforced Mo₅SiB₂(T2)-Mo₃Si alloys
pp. 1857-1868(12)
Authors: Parthasarathy T.A.; Mendiratta M.G.; Dimiduk D.M.

Hot tearing of nickel-based superalloys during directional solidification
pp. 1869-1879(11)
Authors: Zhang J.; Singer R.F.

Size effects on the mechanical properties of thin polycrystalline metal films on substrates
pp. 1881-1893(13)
Authors: Choi Y.; Suresh S.