Acta Materialia

Keywords
pp. I-III(3)

Internal stress plasticity due to chemical stresses
pp. 3387-3400(14)
Authors: Schuh C.; Dunand D.C.

A phase field study of microstructural changes due to the Kirkendall effect in two-phase diffusion couples
pp. 3401-3408(8)
Authors: Wu K.; Morral J.E.; Wang Y.

Investigation of metal foam formation by microscopy and ultra small-angle neutron scattering
pp. 3409-3420(12)
Authors: Banhart J.; Bellmann D.; Clemens H.

Effect of grain boundary character on the martensitic transformation in Fe-32at.1075 bicrystals
pp. 3421-3432(12)
Authors: Ueda M.; Yasuda H.Y.; Umakoshi Y.

Micromechanical and macromechanical effects in grain scale polycrystal plasticity experimentation and simulation
pp. 3433-3441(9)
Authors: Raabe D.; Sachtleber M.; Zhao Z.; Roters F.; Zaefferer S.

GP-zones in Al-Zn-Mg alloys and their role in artificial aging
pp. 3443-3451(9)
Authors: Berg L.K.; Gjonnes J.; Hansen V.; Li X.Z.; Knutson-Wedel M.; Waterloo G.; Schryvers D.; Wallenberg L.R.

Nanoquasicrystalline phase formation in binary Zr-Pd and Zr-Pt alloys
pp. 3453-3462(10)
Authors: Murty B.S.; Ping D.H.; Ohnuma M.; Hono K.

Spinodal decomposition in a small radially stressed sphere
pp. 3463-3474(12)
Author: Johnson W.C.

Diffusion of ⁴⁴Ti and ⁶³Ni in TiAl single crystal
pp. 3475-3485(11)
Authors: Ikeda T.; Kadowaki H.; Nakajima H.

On misfit-compensating ledges/disconnections
pp. 3487-3492(6)
Authors: Hall M.G.; Furuhara T.; Aaronson H.I.; Hirth J.P.

Impurity controlled phase formation at platinum-sapphire interfaces
pp. 3493-3504(12)
Authors: Murtagh M.J.; Hulvat J.; Dieckmann R.; Sass S.L.

Micromechanical modelling of deformation and failure in Ti-6Al-4V/SiC composites
pp. 3505-3519(15)
Authors: Gonzalez C.; Llorca J.

Theory of diffusion-accommodated grain rotation in columnar polycrystalline microstructures
pp. 3521-3532(12)
Authors: Moldovan D.; Wolf D.; Phillpot S.R.

Wetting on rough surfaces
pp. 3533-3538(6)
Authors: Palasantzas G.; de Hosson J.T.M.

An analysis of load-penetration curves from instrumented indentation
pp. 3539-3551(13)
Authors: Zeng K.; Chiu C.-h.

Temperature dependence of crack wake bridging stresses in a SiC-whisker-reinforced alumina
pp. 3553-3563(11)
Authors: Sarrafi-Nour G.R.; Coyle T.W.

The effect of alpha platelet thickness on plastic flow during hot working of TI-6Al-4V with a transformed microstructure
pp. 3565-3573(9)
Authors: Semiatin S.L.; Bieler T.R.

A first-principles thermodynamic approach to ordering in Ni-Mo alloys
pp. 3575-3587(13)
Authors: Arya A.; Banerjee S.; Das G.P.; Dasgupta I.; Saha-Dasgupta T.; Mookerjee A.

Tensile behaviour of gas pressure sintered silicon nitride in the 1600-1700^oC temperature range
pp. 3589-3596(8)
Authors: Testu S.; Rouxel T.; Besson J.-L.

Effects of thickness on the characteristic length scale of dislocation plasticity in Ag thin films
pp. 3597-3607(11)
Authors: Kobrinsky M.J.; Dehm G.; Thompson C.V.; Arzt E.

Shape memory and pseudoelastic behavior of 51.51085-Ti single crystals in solutionized and overaged state
pp. 3609-3620(12)
Authors: Sehitoglu H.; Jun J.; Zhang X.; Karaman I.; Chumlyakov Y.; Maier H.J.; Gall K.

Strain-temperature behavior of NiTiCu shape memory single crystals
pp. 3621-3634(14)
Authors: Sehitoglu H.; Karaman I.; Zhang X.; Viswanath A.; Chumlyakov Y.; Maier H.J.

A discrete approach to grain growth based on pair interactions
pp. 3635-3643(9)
Author: Di Nunzio P.E.

The influence of coherent TiCu plate-like precipitates on the thermoelastic martensitic transformation in melt-spun Ti₅₀Ni₂₅Cu₂₅ shape memory alloys, by H. Rosner, P. Schloszmacher, A. V. Shelyakov and A. M. Glezer, originally published in Acta Materialia, Volume 49 (9), 2001, pp. 1541-1548
pp. 3645-3645(1)