Acta Materialia

Structural characterizations of 6H-barium niobium sulfide
pp. 5985-5992(8)
Authors: Yang G.Y.; Bando Y.; Saeki M.; Onoda M.

A liquid state least-squares procedure for obtaining solid state multicomponent diffusion coefficients from diffusion couples
pp. 5993-5999(7)
Author: Miller D.G.

Origin of superplastic elongation in aluminum alloys produced by mechanical milling
pp. 6001-6007(7)
Authors: Hasegawa T.; Yasuno T.; Nagai T.; Takahashi T.

Effects of addition of magnesium on interface structure and high-strain-rate superplasticity in Si₃N₄-reinforced Al-alloy composites
pp. 6009-6020(12)
Authors: Jeong H.-G.; Hiraga K.; Mabuchi M.; Higashi K.

Continuous recrystallization-related phenomena in a commercial Al-Fe-Si alloy
pp. 6021-6032(12)
Authors: Davies R.K.; Randle V.; Marshall G.J.

The kinetics of solid nucleation in zirconium
pp. 6033-6039(7)
Authors: Morton C.W.; Hofmeister W.H.; Bayuzick R.J.; Rulison A.J.; Watkins J.L.

Plastic anisotropy and cracking at hardness impressions in single crystal ammonium perchlorate
pp. 6041-6052(12)
Authors: Elban W.L.; Armstrong R.W.

Evolution of phase in an Al-Cu-Mg-Ag alloy-a three-dimensional atom probe study
pp. 6053-6062(10)
Authors: Reich L.; Murayama M.; Hono K.

Precipitation in 9Ni-12Cr-2Cu maraging steels
pp. 6063-6073(11)
Authors: Stiller K.; Hattestrand M.; Danoix F.

Finite element modelling of deformation in particulate reinforced metal matrix composites with random local microstructure variation
pp. 6075-6088(14)
Authors: Leggoe J.W.; Mammoli A.A.; Bush M.B.; Hu X.Z.

Mechanical properties of tungsten and steel fiber reinforced Zr_41.25Ti_13.75Cu_12.5Ni₁₀Be_22.5 metallic glass matrix composites
pp. 6089-6102(14)
Authors: Conner R.D.; Dandliker R.B.; Johnson W.L.

A theoretical approach to the thermal transient mechanical loss in Mg matrix composites
pp. 6103-6114(12)
Authors: Mayencourt C.; Schaller R.

SiC particle reinforced oxynitride glass: stress relaxation, creep and strain-rate imposed experiments
pp. 6115-6130(16)
Authors: Rouxel T.; Baron B.; Verdier P.; Sakuma T.

Modeling the generation, equilibrium, and emission of dislocations at elastically misfitted particles
pp. 6131-6144(14)
Authors: Xin X.J.; Daehn G.S.; Wagoner R.H.

Subnanometer scale study of segregation at grain boundaries in an Fe(Si) alloy
pp. 6145-6161(17)
Authors: Krakauer B.W.; Seidman D.N.

On the (Al)/'(Al₃Li) metastable solvus in aluminium-lithium alloys
pp. 6163-6171(9)
Authors: Noble B.; Bray S.E.

TEM investigation of non-crystallographic displacements near antiphase domain boundaries in D0₃ ordered Fe₃Al
pp. 6173-6182(10)
Authors: Liu W.; Gemperle A.; Gemperlova J.; Paidar V.; Nembach E.

Three-dimensional modeling of indent-induced plastic zone at a mesoscale
pp. 6183-6194(12)
Authors: Fivel M.C.; Robertson C.F.; Canova G.R.; Boulanger L.

Direct observation of diffusional creep via TEM in polycrystalline thin films of gold
pp. 6195-6203(9)
Authors: Harris K.E.; King A.H.

Electron microscopy of reaction layers between SiC and Ti-6Al-4V after laser embedding
pp. 6205-6217(13)
Authors: Kloosterman A.B.; Kooi B.J.; De Hosson J.T.M.

Grain growth of uniform boundaries with scaling
pp. 6219-6226(8)
Author: Mullins W.W.

Depth resolved conductive mode imaging of varistor grain boundaries
pp. 6227-6235(9)
Authors: Russell J.D.; Leach C.

Spectroscopic cathodoluminescence studies of additive free zinc oxide and varistor ceramics
pp. 6237-6243(7)
Authors: Halls D.C.; Leach C.

Room-temperature mechanical behavior of FeAl: effects of stoichiometry, environment, and boron addition
pp. 6245-6256(12)
Authors: Cohron J.W.; Lin Y.; Zee R.H.; George E.P.

Additivity and isokinetic behaviour in relation to particle dissolution
pp. 6257-6266(10)
Authors: BjOrneklett B.I.; Grong .; Myhr O.R.; Kluken A.O.

Effect of strain rate on plastic flow and failure in polycrystalline tungsten
pp. 6267-6290(24)
Authors: Dummer T.; Lasalvia J.C.; Ravichandran G.; Meyers M.A.

Competition between nucleation and early growth of ferrite from austenite-studies using cellular automaton simulations
pp. 6291-6303(13)
Authors: Kumar M.; Sasikumar R.; Kesavan Nair P.

Polycrystalline yielding-perspectives on its onset
pp. 6305-6309(5)
Author: Margolin H.