Journal of Cleaner Production

An overview of the special issue
pp. i-iv(4)
Authors: Ashford N.A.; Cote R.P.

Industrial ecology: an historical view
pp. 1-10(10)
Authors: Dayal B.S.; MacGregor J.F.; Erkman S.

Development of an industrial ecology toolbox for the introduction of industrial ecology in enterprises--I
pp. 11-25(15)
Authors: Diamond S.; Assef J.Z.; Watters J.C.; Deshpande P.B.; Alatiqi I.M.; van Berkel R.; Willems E.; Lafleur M.

Application of an industrial ecology toolbox for the introduction of industrial ecology in enterprises--II
pp. 27-37(11)
Authors: Rutland C.A.; Wang M.L.; van Berkel R.; Lafleur M.

A perspective on industrial ecology and its application to a metals-industry ecosystem
pp. 39-45(7)
Authors: Boskovic J.D.; Sagar A.D.; Frosch R.A.

Implementing nature's lesson: the industrial recycling network enhancing regional development
pp. 47-56(10)
Authors: Schwarz E.J.; Steininger K.W.

Creating by-product resource exchanges: strategies for eco-industrial parks
pp. 57-65(9)
Authors: Ishibashi T.; Okamura H.; Kocijan J.; Lowe E.A.

Supporting pillars for industrial ecosystems
pp. 67-74(8)
Authors: Yoshimura M.; Frank P.M.; Ding X.; Cote R.P.; Smolenaars T.

Planning and designing industrial landscapes for eco-efficiency
pp. 75-78(4)
Author: Grant J.

Types of industrial ecology: the problem of coordination
pp. 79-86(8)
Authors: Duan J.; Grimble M.J.; Johnson M.A.; Boons F.A.A.; Baas L.W.

Industrial ecology: a framework for product and process design
pp. 87-95(9)
Authors: Sriniwas G.R.; Arkun Y.; Ehrenfeld J.R.

Design for the environment and Green Chemistry: the heart and soul of industrial ecology
pp. 97-102(6)
Authors: Shayan A.; Murad G.; Postlethwaite I.; Gu D.-W.; Anastas P.T.; Breen J.J.

Pollution prevention and...or industrial ecology?
pp. 103-108(6)
Authors: An X.; Shawky A.A.; Maekawa K.; Mohideen M.J.; Perkins J.D.; Pistikopoulos E.N.; Oldenburg K.U.; Geiser K.

Zero emissions: the ultimate goal of cleaner production
pp. 109-113(5)
Authors: Watanabe F.; Scali C.; Morretta M.; Semino D.; Pauli G.

Industrial safety: the neglected issue in industrial ecology
pp. 115-121(7)
Authors: Wigum B.J.; French W.J.; Howarth R.J.; Hills C.; Ashford N.A.

Commentary: source reduction, input management and dual capitalism
pp. 123-123(1)
Author: Odum E.P.

The relation between industrial and ecological systems
pp. 125-129(5)
Authors: Cao H.T.; Bucea L.; Ray A.; Yozghatlian S.; Kendi T.A.; Doyle F.J.; Commoner B.

Zero Pollution for Industry: Waste Minimization Through Industrial Complexes
pp. 131-132(2)
Authors: Hovarongkura D.; Lowe E.

Method for regulating plant growth
pp. 137-137(1)
Authors: Kinnersley A.M.; Scott T.C.; Yopp J.H.; Whitten G.

Primary tillage unit with reduced disturbance of surface soil and residue
pp. 137-137(1)
Author: Dietrich W.J.

Growth regulation of zebra mussels through magnetic water treatment
pp. 137-137(1)
Author: Sanderson C.

Degradable package for containment of liquids
pp. 137-137(1)
Author: Suskind S.P.

Reduced operator emission exposure antennas for safer hand-held radios and cellular telephones
pp. 137-138(2)
Authors: Stutzman W.; Nealy J.R.

Apparatus and method of preheating steel scrap for a twin shell electric arc furnace
pp. 138-138(1)
Authors: Genge U.F.; Burda R.J.; Brandon J.W.

Golf ball with clear cover
pp. 138-138(1)
Authors: Proudfit J.R.; Peterson R.

Direct iron and steelmaking
pp. 138-138(1)
Author: Sherwood W.

Process and installation for removing solvent vapor from exhaust air
pp. 138-139(2)
Authors: Straubinger W.; Pecher G.u.; Kohlmann R.

Helium recovery
pp. 139-139(1)
Authors: D'Amico J.S.; Reinhold H.E.; Knaebel K.

Process for cleaning metal surfaces with physical emulsion of terpene and water
pp. 139-139(1)
Authors: Hamilton C.R.; Gustafson R.M.

Method for cleaning the surfaces of a motor vehicle
pp. 139-139(1)
Authors: Gatt S.; Barenholz Y.; Bercovier H.; Eldar Z.

Method and apparatus for rendering medical materials safe
pp. 139-139(1)
Authors: Bridges J.; Sresty G.C.; Held J.S.; Sharp J.W.; Bajzek T.

Regeneration method for process waste containing sulfur and phosphorus
pp. 139-140(2)
Authors: Tuovinen H.; Saari J.; Roine A.; Holma H.; Kalliokoski M.

Non-cryogenic method and apparatus for producing pure nitrogen
pp. 140-140(1)
Author: Brahmbhatt S.R.

Microbial degradation of trichloroethylene dichloroethylenes and aromatic pollutants
pp. 140-140(1)
Authors: Shields M.S.; Francesconi S.C.

Process for the production of hydrocarbons
pp. 140-140(1)
Authors: Benham C.B.; Bohn M.S.; Yakobson D.

Process for the production of polyisoolefins
pp. 140-140(1)
Authors: Baade W.; Heinrich R.; Langstein G.; Mulder T.; Puskas J.

Water-dispersible adhesive composition and process
pp. 141-141(1)
Authors: Miller R.A.; George S.; Parsons T.E.; Montgomery M.A.

Process for the preparation of level-off DP cellulose
pp. 141-141(1)
Authors: Bergfeld M.; Seifert J.u.

Process for releasing acidic organic compounds from salts thereof by carbon dioxide
pp. 141-141(1)
Authors: Kulpe J.u.; Strutz H.; Ruml u.H.-M.; Rittner S.

Continuous oven for making baked ware
pp. 141-141(1)
Authors: Haas F.; Haas J.; Baum E.

Flotation of lead sulfides using rapeseed oil
pp. 141-142(2)
Authors: Benn F.; Dattilo M.; Cornell W.L.

Methods and compositions for recycling asphalt pavement
pp. 142-142(1)
Authors: Huege F.R.; Shields P.

Abrasive blasting system with waste water recycling
pp. 142-142(1)
Author: Jacobs P.

Kraft smelt solidification in a fluidized bed reactor
pp. 142-142(1)
Author: Empie H.J.

Combined aerobic & anaerobic treating method & facility for hog wastewater
pp. 142-142(1)
Authors: Hsu R.; Sun B.-L.

Process for treatment of waste stream using scytinostroma galactinum fungus ATCC 20966
pp. 142-143(2)
Authors: Blanchette R.A.; Brush T.; Farrell R.; Krisa K.; Mishra C.

Process for the alkylation of benzene-rich reformate using MCM-49
pp. 143-143(1)
Authors: Cheng J.C.; Huang T.J.

Optically-based chemical detection system
pp. 143-143(1)
Author: Jack M.

Dishwashing machine with integrated recycling system
pp. 143-143(1)
Author: Vilen E.O.

Marine fueling facility spill containment system
pp. 143-144(2)
Author: Holland H.W.

Method for adsorbing and separating argon and hydrogen gases in high concentration from waste ammonia purge gas, and apparatus therefor
pp. 144-144(1)
Authors: Cho S.-H.; Chue K.-T.; Kim J.-N.; Kim K.-I.; You Y.-J.; Lee S.-G.

Process for purification and recycle of solutions
pp. 144-144(1)
Author: Landfors J.

Apparatus for minimizing effluent discharges and recovering chemicals in a pulp mill
pp. 144-144(1)
Authors: Nykanen T.S.; Greenwood B.F.; Gullichsen J.; Kiiskila E.; Mattelmaki E.; Phillips J.R.; Richardsen J.; Ryham R.; Soderman J.; Wiklund K.

Extracts of cucurbita sp., process for their preparation and their use in medicaments and in cosmetics
pp. 144-145(2)
Author: Bombardelli E.

Low toxicity terpene drilling fluid and drilling fluid additive
pp. 145-145(1)
Author: Duncan W.M.

Virtual continuous emission monitoring system
pp. 145-145(1)
Authors: Keeler J.; Havener J.; Godbole D.; Ferguson R.

Vaporizing and concentration drying apparatus and method
pp. 145-145(1)
Authors: Lee D.S.; Shin H.K.; Nonhyun D.

Method and apparatus for clean cold starting of internal combustion engines
pp. 145-145(1)
Author: Feuling J.J.

General parts washer
pp. 146-146(1)
Author: Mansur P.

Recovery system for dissipated energy of an engine motor vehicle during its running conditions
pp. 146-146(1)
Author: Reis G.

Minimal effluents discharge pulp mill with chemical recovery
pp. 146-146(1)
Authors: Nykanen T.S.; Greenwood B.F.; Gullichsen J.; Kiiskila E.; Mattelmaki E.; Phillips J.R.; Richardsen J.T.; Ryham R.; Soderman J.; Wiklund K.

Membrane filtration system
pp. 146-147(2)
Author: Le M.S.

Vehicle coolant recycling
pp. 147-147(1)
Authors: Ische K.W.; Johnson M.; Dea W.; Chandler T.

Processes for the disposal and recovery of phossy water
pp. 147-147(1)
Author: Barber J.C.

Method for the preparation of pure carboxyethyl germanium sesquioxide
pp. 147-147(1)
Author: Arnold M.J.

Process for working up the liquid reaction products from the Cu-catalysed preparation of dimethyl carbonate
pp. 147-147(1)
Authors: Rechner J.; Wagner P.; Buysch H.-J.; Klausner A.

Environmentally safe cutting mechanism for stalks or stems of plants and/or grass like vegetation
pp. 147-148(2)
Authors: Suller A.; Tacu oth acu A.a.

Method and system for recycling sorbent in a fluidized bed combustor
pp. 148-148(1)
Authors: Wu S.; Probst S.G.; Edvardsson C.M.; Alliston M.

Produce washer
pp. 148-148(1)
Author: St Martin M.

Padded article
pp. 148-148(1)
Author: Lindberg K.M.

Medical air vacuum
pp. 148-148(1)
Author: Milam D.N.

Photofinishing effluent purifying process and apparatus
pp. 148-149(2)
Author: Arato G.J.

Method for treatment of waste water contaminated with cyanide ion
pp. 149-149(1)
Author: Stevenson S.M.

Free-flowing potassium bicarbonate composition
pp. 149-149(1)
Authors: Lajoie M.S.; Sargent R.C.

Selective catalytic reduction of nitrogen oxides
pp. 149-149(1)
Authors: Chang C.; Santiesteban J.G.; Shihabi D.; Stevenson S.; Vartuli J.C.

Process for the continuous preparation of nitrosyl chloride
pp. 149-149(1)
Authors: Kraus H.; Klausener A.

Multi-deck clamshell cooking and staging process
pp. 149-150(2)
Author: Liebermann B.E.

Recycling the recording layer of flexographic printing plates
pp. 150-150(1)
Authors: Kraska U.; Weikart U.; Simon R.

Method of foliar application of magnesium hydrogen carbonate
pp. 150-150(1)
Authors: Langelin H.-R.; Goffin R.

Rubbery blend having low permanent compression set
pp. 150-150(1)
Authors: Ngoc H.D.; Duval G.P.

Low profile additives for polyester resin systems based on asymmetric glycols and aromatic diacids
pp. 150-150(1)
Author: Fisher D.

Water-dispersible adhesive blend composition
pp. 151-151(1)
Authors: Miller R.A.; Parsons T.E.; Montgomery M.A.

Process for applying a water-dispersible adhesive composition
pp. 151-151(1)
Authors: Miller R.A.; George S.; Barrett A.E.; Parsons T.E.

Thermoplastic copolyesters having improved gas barrier properties
pp. 151-151(1)
Author: Sublett B.

Atomospheric pressure polyester process
pp. 151-151(1)
Author: Bhatia K.

Method and apparatus for building environmental compliance
pp. 151-151(1)
Author: Benda G.

Water recovery device for reclaiming and refiltering atmospheric water
pp. 151-152(2)
Author: Harrison L.G.

Refrigeration apparatus
pp. 152-152(1)
Authors: Kuzniarski J.N.; Goodall P.; King B.

Packaging for shipping spent fluorescent lamps
pp. 152-152(1)
Authors: Lawrence B.J.; Boyle J.; Schreffler S.A.

Process of recycling iron oxides and plastics in steelmaking
pp. 152-152(1)
Authors: Bogdan E.; Terchick A.A.

Electrolytic desilvering method
pp. 152-152(1)
Authors: Bernard P.E.Y.; Bertorelli C.R.; Marchand A.C.S.

Planar bicarbonate sensor
pp. 152-153(2)
Authors: Benco J.S.; Foos J.

Process of removing surfactant from uncured concrete by flotation
pp. 153-153(1)
Author: Tanii K.

Non-toxic animal repellent
pp. 153-153(1)
Author: Abraham C.J.

White-rot fungus and uses thereof
pp. 153-153(1)
Authors: Blanchette R.A.; Brush T.; Farrell R.; Krisa K.; Mishra C.

Insecticidal toxins from the parastic wasp, bracon hebetor
pp. 153-153(1)
Authors: Quistad G.B.; Leisy D.

Process for recycling mixed polymer containing polyethylene terephthalate
pp. 153-153(1)
Authors: Brownscombe T.F.; Fong H.L.; Diaz Z.; Chuah H.; June R.L.; Rollick K.L.; Semple T.C.; Tompkin M.R.

Closed cell, low density ethylenic polymer foam produced with inorganic halogen-free blowing agents
pp. 154-154(1)
Authors: Chaudhary B.; Eschenlauer G.; Marks B.S.

Image forming apparatus having toner recycling device with electrostatic conveyor
pp. 154-154(1)
Authors: Ishikawa F.; Oka S.; Kai T.

Low-maintenance system for maintaining a cargo in a refrigerated condition over an extended duration
pp. 154-154(1)
Authors: Claterbos J.K.; Fulton S.C.

Method for cullet preheating and pollution emission reduction in the glass manufacturing process
pp. 154-154(1)
Author: Alexander J.C.

Recovery of steel plant revert materials through cementitious agglomeration
pp. 154-154(1)
Authors: Terza R.R.; Bogdan E.A.

Filtration system for recycling water used in a car wash
pp. 155-155(1)
Author: Van Der E.N.

Process for contaminated oil reclamation
pp. 155-155(1)
Author: Mellen C.R.

Recycle process for regeneration of ammoniacal copper etchant
pp. 155-155(1)
Authors: Krulik G.A.; Mandich N.V.; Singh R.

Thermodynamic power generation system employing a three component working fluid
pp. 155-155(1)
Author: Drnevich R.

Method for micro-cleaning a support and apparatus for implementing same
pp. 155-156(2)
Author: Diat C.

Bituminous compositions
pp. 156-156(1)
Author: Bredael P.

Treatment of absorbent sanitary paper products
pp. 156-156(1)
Authors: Conway M.E.; Jooste F.; Smith M.D.

Process for enzymatically degumming vegetable oil
pp. 156-156(1)
Authors: Buchold H.; Boensch R.; Schroeppel J.

Recovery of water and solids in a paper mill
pp. 156-156(1)
Authors: Bleakley I.S.; Toivonen H.O.

Supercritical oxidation reactor
pp. 156-157(2)
Author: McGuinness T.

Process for high quality plasma arc and laser cutting of stainless steel and aluminum
pp. 157-157(1)
Authors: Couch R.W.; Sanders N.A.; Lu Z.; Luo L.; Stenfelt S.C.O.

Method and laser system for the thermal analysis of a substance
pp. 157-157(1)
Author: Nazarian A.

Method for maintaining a continuously-saturated level of ascorbic acid in a patient's body
pp. 157-157(1)
Author: Ordman A.B.

Process including depolymerization in polyester reactor for recycling polyester materials
pp. 157-158(2)
Authors: Sublett B.; Connell G.

Process for preparing poly(vinyl trifluoroacetate) and poly(vinyltrifluoroacetate/vinyl ester) copolymers in supercritical CO2
pp. 158-158(1)
Authors: Eian G.L.; Elsbernd C.L.S.

Methods for the destruction of ozone depleting substances
pp. 158-158(1)
Authors: Mouk R.W.; Abel A.E.

High efficiency, forced hot air heater which humidifies and cleans the air
pp. 158-158(1)
Author: Kim D.S.

Apparatus to remove inorganic scale from a supercritical water oxidation reactor
pp. 158-158(1)
Authors: Bond L.D.; Mills C.; Whiting P.; Koutz S.; Hazlebeck D.A.; Downey K.W.

Reversible flow supercritical reactor and method for operating same
pp. 159-159(1)
Author: Whiting P.

Method for detecting and evaluating plant emissions
pp. 159-159(1)
Authors: Rumez W.; Sumser S.

Integrated circuit packaging
pp. 159-159(1)
Authors: Livshits B.I.; Harpell K.E.

Area preserving transformation system for press forming blank development
pp. 159-159(1)
Authors: Oliver J.H.; Nair N.K.

Method and apparatus for enhancing the growth and quality of edible plants
pp. 159-160(2)
Authors: Ismail S.; Sacks B.

Sequential bleaching of de-inked paper pulp with sodium bisulfite, dithionite and borohydride
pp. 160-160(1)
Authors: Wang D.L.K.; Meyers P.

Method and apparatus for recovering acid and metal salts from pricklining liquors
pp. 160-160(1)
Authors: Olsen D.R.; Bailey D.E.

Process for clarifying milkhouse wastewater
pp. 160-160(1)
Authors: Malcolm I.; Weil C.; Kollaard W.

Reducing N2O emissions when burning nitrogen-containing fuels in fluidized bed reactors
pp. 160-161(2)
Authors: Oakes E.J.; Lee Y.Y.; Hiltunen M.

Method for the production of carbon dioxide hydrates
pp. 161-161(1)
Authors: Spencer D.; North W.

Production of hyaluronic acid
pp. 161-161(1)
Authors: Ellwood D.C.; Evans C.G.T.; Dunn G.M.; McInnes N.; Yeo R.; Smith K.

Thermal process for removal of contaminants from process streams
pp. 161-161(1)
Authors: McCain J.; Naumann A.W.; Wang W.-Y.

Integrated process for the simultaneous production of alkyl tert-butyl ethers and 1-butene
pp. 161-161(1)
Authors: Paludetto R.; Donati G.; Orsi A.; Pandolfi G.; Trotta R.; Brianti M.

Sequential reaction of TBA and isobutylene with methanol
pp. 161-162(2)
Authors: Preston K.; Tillotson L.E.; Hwan R.-Y.J.

Process for the catalytic dehydrogenation of alkanes to alkenes with simultaneous combustion of hydrogen
pp. 162-162(1)
Authors: Agaskar P.A.; Grasselli R.K.; Michaels J.; Reischman P.T.; Stern D.L.; Tsikoyiannis J.G.

Closed-loop multistage system for cleaning printed circuit boards
pp. 162-162(1)
Author: Treiber J.H.

Plant germinants produced from analogs of botanic seed
pp. 162-162(1)
Authors: Carlson W.C.; Hartle J.E.; Bower B.K.

Sound-barrier panel
pp. 162-162(1)
Authors: Ogorchock P.; McCousin S.

Dehumidifier for cryogenic refrigeration system
pp. 163-163(1)
Author: Martin P.S.

Recycling water cooler
pp. 163-163(1)
Author: Pugin D.

Method for controlling engine timing
pp. 163-163(1)
Authors: Houtz P.; Weller B.

Water conservation delivery system using temperature-controlled by-pass circuit
pp. 163-163(1)
Author: Storch P.

method and apparatus for separation and volume measurement of components for lightweight concrete
pp. 163-164(2)
Author: Holik K.

Alkali activated class C fly ash cement
pp. 164-164(1)
Authors: Roy A.; Schilling P.J.; Eaton H.C.

Energy conservation during plural stage distillation
pp. 164-164(1)
Authors: Parker S.J.; Sliger A.G.; Hwan R.-Y.J.

Process for decoking catalysts
pp. 164-164(1)
Authors: Ramachandran R.; Menon R.K.

Control of dissolved gases in liquids
pp. 164-164(1)
Authors: Page J.K.R.; Kalthod D.G.

Process for recycling multicomponent mixed polymer wastes
pp. 164-165(2)
Authors: Sullivan J.P.; Hoyt M.

Process for recycling amino-carboxylic acid waste materials into amido-carboxylic acids
pp. 165-165(1)
Authors: Zima G.C.; Lutz G.; McChesney G.; Williams T.H.

Process for manufacturing granular igniter
pp. 165-165(1)
Authors: Ochi K.; Asano N.; Sawada Y.

Power conservation circuit
pp. 165-165(1)
Author: Cunningham J.

Process for the preservation of products at low temperature in an insulated chamber, installation for practicing the process, insulated chamber and container for such a chamber
pp. 165-165(1)
Authors: Gibot C.; Bouguet P.

Vapor recovery system with refrigeration and regeneration cycles
pp. 166-166(1)
Author: Hewitt J.P.

Method and apparatus for clean cold starting of internal combustion engines
pp. 166-166(1)
Author: Feuling J.

Method for recovering methane from a solid carbonaceous subterranean formation
pp. 166-166(1)
Authors: Seidle J.P.; Yee D.; Puri R.

Lead-oxide preventing apparatus for automatic lead-soldering device
pp. 166-166(1)
Author: Hwang B.-g.

Method and an apparatus for recycling a resin component
pp. 166-167(2)
Author: Yamamoto H.

Process for production of recycled plastic products
pp. 167-167(1)
Author: Preiss J.

Process for recovering post-consumer waste plastics
pp. 167-167(1)
Author: Ricciardelli T.E.

Method for marking and fading textiles with lasers
pp. 167-167(1)
Authors: Lockman W.J.; Clayson F.

Combination plant food supplement and compost material and process
pp. 167-167(1)
Authors: Thorpe J.W.; Thorpe D.E.

Process for recycling silicone-coated paper
pp. 167-168(2)
Authors: Hentzschel P.; Kamutzki W.; Wolf D.

Process and apparatus for circulating backwater in a papermaking machine
pp. 168-168(1)
Author: Meinander P.

Apparatus for biologically treating lipid-containing waste water
pp. 168-168(1)
Authors: Chigusa K.; Nakai Y.

Thermophilic digestion of chitin-containing waste
pp. 168-168(1)
Authors: Townsley P.M.; Townsley P.

Detergent composition for precision parts or jigs
pp. 168-168(1)
Authors: Nozawa M.; Kashihara E.

Insulating foam of low thermal conductivity and method of preparation
pp. 168-168(1)
Author: Ward W.J.

Low specific gravity binder for magnets
pp. 169-169(1)
Author: Szczepanski T.R.

Method for recovering phenol and xanthene values from waste polycarbonate
pp. 169-169(1)
Authors: Caruso A.J.; Lee J.

Apparatus and method for controlling the air-fuel ratio of an internal combustion engine
pp. 169-169(1)
Author: Uchikawa A.

Thermal inter-cooler
pp. 169-169(1)
Author: Nivens J.W.

Method for reducing NOx emissions from a regenerative glass furnace
pp. 169-170(2)
Authors: Quirk R.; Bird D.A.; Shulver I.N.; McIntosh R.

Thermal stabilization of steelmaking slag
pp. 170-170(1)
Authors: Mikhail S.; Turcotte A.-M.

Food processing effluent rendering process and apparatus
pp. 170-170(1)
Authors: O'Carroll L.C.; O'Carroll C.D.; Jones A.; Matlock M.T.; McLeod R.D.

HVAC heat transfer fluid recycling
pp. 170-170(1)
Author: Hilgren W.L.

Ammonium bicarbonate/ammonium carbamate activated benzyl alcohol paint stripper
pp. 170-170(1)
Author: Distaso J.

Tin oxide based conductive powders and coatings
pp. 170-171(2)
Authors: Feist T.P.; Jacobson H.W.

Method and apparatus for recycling waste composite material
pp. 171-171(1)
Author: Amour W.

Removal of mercury and cadmium and their compounds from incinerator flue gases
pp. 171-171(1)
Author: Lerner B.J.

Apparatus for forming a recyclable lined container
pp. 171-171(1)
Author: Bright S.A.

Clamshell grill cooking and staging process
pp. 171-171(1)
Author: Liebermann B.

Aerogel-in-foam thermal insulation and its preparation
pp. 171-172(2)
Authors: Fidler C.; Simonton T.C.

Organic waste disposal system
pp. 172-172(1)
Authors: Teramachi M.; Kinoshita K.; Takakuwa Y.; Fukui E.; Kamiyanagita T.

Method and system for sampling and determining the presence of contaminants in recyclable plastic materials
pp. 172-172(1)
Authors: Fine D.H.; Fraim F.W.; MacDonald S.J.; Malaspina A.; Bayer F.; van Buren M.D.

Synthetic paraffinic hydrocarbon drilling fluid
pp. 172-172(1)
Author: Lin K.-F.

Blend composition containing recycled polycarbonate and recycled polymethylmethacrylate
pp. 172-173(2)
Author: Lieberman M.

Process for the production of ethyl tert.-alkyl ethers
pp. 173-173(1)
Authors: Rastelli H.; Yon C.M.; Frey S.

Multistage indirect propylene hydration process for the production of diisopropyl ether and isopropanol
pp. 173-173(1)
Authors: Bell W.; Brown S.; Trewella J.C.

Process for removal of nitriles from etherification feedstocks
pp. 173-173(1)
Authors: Frey S.; Cottrell P.R.; Hamm D.A.

Polymer conversion process
pp. 173-174(2)
Author: de Broqueville A.

Plant for urea production
pp. 174-174(1)
Author: Pagani G.

Ink composition for ink-jet printing
pp. 174-174(1)
Authors: Gino L.; Frera L.; Giordano N.

Method for producing feedstocks of high quality lube base oil from unconverted oil of fuels hydrocracker operating in recycle mode
pp. 174-174(1)
Authors: Kwon S.-h.; Min W.-s.; Lee Y.-k.

Screen, vortex apparatus for cleaning recycled pulp and related process
pp. 174-174(1)
Author: Markham L.D.

Environmentally friendly chewing gum compositions containing elastic protein-based polymers and method of making it
pp. 175-175(1)
Author: Hartman S.E.

Rattle jig
pp. 175-175(1)
Author: Wicht J.E.

Fishing weight
pp. 175-175(1)
Authors: Cornell T.W.; Reinbold J.

Hand injector gas fire extinguisher
pp. 175-175(1)
Author: Fujiki M.

Fire extinguishing methods and systems
pp. 175-176(2)
Authors: Spector Y.; Jacobson E.; Naishtut V.; Vittenberg M.; Beinert Z.

Electric hybrid vehicle
pp. 176-176(1)
Author: Kitada S.

Method of manufacture of polyester-chip products for casting artificial-stone articles
pp. 176-176(1)
Author: Novak J.P.

Process and apparatus for making crumb rubber from vehicle tires
pp. 176-176(1)
Authors: Perfido K.F.; Cialone A.M.

Process and apparatus for coloring glass
pp. 176-176(1)
Authors: Argent R.; Bolin J.A.

Anion-exchange membrane extractor for boric acid separation
pp. 176-177(2)
Authors: Lee K.-J.; Park J.-K.

Use of silicon containing polyelectrolytes in wastewater treatment
pp. 177-177(1)
Authors: Sivakumar A.; Collins J.H.; Ramesh M.

Methods and diagnostic kits for determining toxicity utilizing bacterial stress promoters fused to reporter genes
pp. 177-177(1)
Author: Farr S.B.

Process for recovering a pure carbon monoxide fraction
pp. 177-177(1)
Authors: Bauer H.; Fabian R.

Compact disc holder
pp. 178-178(1)
Author: Tell R.B.

Method for recovering fiber from effluent streams
pp. 178-178(1)
Authors: Wolfer E.; Willemsen B.; Maroju V.; Martiny A.

Method and apparatus for closed loop recycling of contaminated cleaning solution
pp. 178-178(1)
Authors: McGinness M.P.; Short W.

Method of desanding, desalting and concentrating organic wastes
pp. 178-178(1)
Author: Solomon W.E.

Enzymatic oxidation of alcohols to aldehydes in a continuous reaction system using Candida boidinii
pp. 178-179(2)
Authors: Gabelman A.; Luzio G.A.

Clostridium stain which produces acetic acid from waste gases
pp. 179-179(1)
Author: Gaddy J.L.

Production of pulp by the soda-anthraquinone process (SAP) with recovery of the cooking chemicals
pp. 179-179(1)
Authors: Gordon O.W.; Plattner E.; Doppenberg F.

Method for producing carbon fiber
pp. 179-179(1)
Authors: Arai Y.; Miura K.; Nishikawa T.; Matsumoto M.

Turf and soil drought stress treatment comprising a siloxane and a polyalkalene oxide surfactant
pp. 179-179(1)
Authors: Bowey K.G.; Baldwin N.A.

Biodegradable vegetable oil grease
pp. 180-180(1)
Author: Wiggins G.