Acta Metallurgica Et Materialia

Point defect concentration relaxation and creep transients in binary oxides
pp. 3589-3604(16)
Authors: Jimenez-Melendo M.; Dominguez-Rodriguez A.; Castaing J.

Fiber damage during the consolidation of PVD Ti&unknown;6Al&unknown;4V coated nextel 610^TM alumina fibers
pp. 3605-3619(15)
Authors: Warren J.; Elzey D.M.; Wadley H.N.G.

Segregation to an (A₀/2)[110] edge dislocation in Cu_0.1Ni_0.9
pp. 3621-3632(12)
Authors: Smith R.W.; Najafabadi R.; Srolovitz D.J.

Dislocation configurations in metal-matrix composites correlated with numerical predictions
pp. 3633-3648(16)
Authors: Barlow C.Y.; Hansen N.

Residual stresses around Vickers indents
pp. 3649-3659(11)
Authors: Pajares A.; Guiberteau F.; Steinbrech R.W.; Dominguez-Rodriguez A.

The ductile-to-brittle transition and ductile failure envelopes of orthotropic ice under biaxial compression
pp. 3661-3668(8)
Authors: Schulson E.M.; Buck S.E.

A new model for the peak of activation area of titanium
pp. 3669-3678(10)
Authors: Farenc S.; Caillard D.; Couret A.

The core energy of dislocations
pp. 3679-3684(6)
Author: Schoeck G.

Weibull modelling of particle cracking in metal matrix composites
pp. 3685-3699(15)
Authors: Lewis C.A.; Withers P.J.

Cracks at mortar-stone interfaces
pp. 3701-3707(7)
Authors: Tan D.M.; Tschegg E.K.; Rotter H.; Kirchner H.O.K.

Plastic deformation mechanisms of treated zirconium
pp. 3709-3719(11)
Authors: Crepin J.; Bretheau T.; Caldemaison D.

The thermodynamics of vacancy formation in f.c.c. metals
pp. 3721-3725(5)
Authors: McLellan R.B.; Angel Y.C.

Hydrogen induced void nucleation of 310 stainless steel
pp. 3727-3732(6)
Authors: Jiang X.-G.; Chu W.-Y.; Xiao J.-M.

A microscopic investigation of the precipitation phenomena observed during the pearlite reaction in vanadium alloyed carbon steels
pp. 3733-3742(10)
Authors: Fourlaris G.; Baker A.J.; Papadimitriou G.D.

Effects of reinforcement geometry on the elastic and plastic behaviour of metal matrix composites
pp. 3743-3754(12)
Authors: Mammoli A.A.; Bush M.B.

Solid state reactions induced by mechanical alloying in metal-silicon (metal = Mo, Nb) systems
pp. 3755-3761(7)
Authors: Liu L.; Padella F.; Guo W.; Magini M.

A solute drag treatment of the effects of alloying elements on the rate of the proeutectoid ferrite transformation in steels
pp. 3763-3774(12)
Authors: Purdy G.R.; Brechet Y.J.M.

Stability of APB-dissociated <111> screw superdislocations in B2-ordered structures
pp. 3775-3782(8)
Author: Sun Y.Q.

Crack nucleation in columnar ice due to elastic anisotropu and grain boundary sliding
pp. 3783-3789(7)
Authors: Picu R.C.; Gupta V.

Observations of crack nucleation in columnar ice due to grain boundary sliding
pp. 3791-3797(7)
Authors: Picu R.C.; Gupta V.

Formation of Cu-type shear bands and their influence on deformation and texture of rolled f.c.c. {112}<111> single crystals
pp. 3799-3812(14)
Authors: Wagner P.; Engler O.; Lucke K.

Fatigue damage in aluminum single crystals-I. On the surface containing the slip burgers vector
pp. 3813-3825(13)
Authors: Zhai T.; Martin J.W.; Briggs G.A.D.

Fracture behavior of spheroidized hypereutectoid steels
pp. 3827-3835(9)
Authors: Lesuer D.R.; Syn C.K.; Sherby O.D.

Directional dependence of corrosion fatigue of iron-silicon bicrystals
pp. 3837-3849(13)
Authors: Wang J.-S.; Mesarovic S.D.

Trapping of point defects in real alloys by considering the effect of short range order
pp. 3851-3860(10)
Author: Yu G.

Rolling textures of pure nickel, nickel-iron and nickel-cobalt alloys
pp. 3861-3872(12)
Author: Ray R.K.

On the representation of random packings of spheres for sintering simulations
pp. 3873-3884(12)
Authors: Aparicio N.D.; Cocks A.C.F.

Effects of early transition metal solutes on the D0₃-B2 critical temperature of Fe₃Al
pp. 3885-3891(7)
Authors: Anthony L.; Fultz B.

Electron back scattering study of domain structure in monoclinic phase of a rare-earth orthoniobate LaNbO₄
pp. 3893-3901(9)
Authors: Jian L.; Wayman C.M.

Finite-difference modelling of self-propagating high-temperature synthesis of materials
pp. 3903-3913(11)
Authors: Bowen C.R.; Derby B.