Journal of the European Ceramic Society

Editorial Board
pp. CO2-CO2(1)

Effect of additives on the crystallization of cordierite-based glass-ceramics as glazes for floor tiles
pp. 817-826(10)
Authors: Torres F.J.; Alarcon J.

Sintered glass-ceramics from Municipal Solid Waste-incinerator fly ashes-part I: the influence of the heating rate on the sinter-crystallisation
pp. 827-832(6)
Authors: Karamanov A.; Pelino M.; Hreglich A.

Comparison of particle size and standard deviation of TiO₂ particles prepared by batch, semi-batch and continuous reaction method
pp. 833-838(6)
Authors: Kim K.D.; Kim H.T.

Synthesis and dielectric characteristics of the layered structure Bi_4-xR_xTi₃O₁₂ (R_x=Pr, Nd, Gd, Dy)
pp. 839-850(12)
Authors: Pineda-Flores J.L.; Chavira E.; Reyes-Gasga J.; Gonzalez A.M.; Huanosta-Tera A.

A misunderstood member of the nagelschmidtite family unveiled: structure of Ca₅Na₂(PO₄)₄ from X-ray powder diffraction data
pp. 851-858(8)
Authors: Celotti G.; Landi E.

Synthesis and thermoelectric properties of (Na_xCa_1-x)₃Co₄O₉ ceramics
pp. 859-863(5)
Authors: Nan J.; Wu J.; Deng Y.; Nan C.W.

Effects of cobalt-ion doping on the electrochemical properties of spinel lithium manganese oxide prepared via a reverse-micelle route
pp. 865-871(7)
Authors: Lu C.-H.; Wang H.-C.

Phase transformation, reaction kinetics and microwave characteristics of Bi₂O₃-ZnO-Nb₂O₅ ceramics
pp. 873-881(9)
Authors: Chen S.-Y.; Lee S.-Y.; Lin Y.-J.

Complex semiconducting ceramic
pp. 883-886(4)
Authors: Leonovici M.; Steflea M.; Popescu M.A.

Sintering and mass transport features of (Sn,Ti)O₂ polycrystalline ceramics
pp. 887-896(10)
Authors: Bueno P.R.; Leite E.R.; Bulhoes L.O.S.; Longo E.; Paiva-Santos C.O.

The influence of the Chitosan adsorption on the stability of SnO₂ suspensions
pp. 897-903(7)
Authors: Castro R.H.R.; Gouvea D.

Effect of copolymer dispersant structure on the properties of alumina suspensions
pp. 905-911(7)
Authors: Baklouti S.; Romdhane M.R.B.; Boufi S.; Pagnoux C.; Chartier T.; Baumard J.F.

The role of organic dispersants in aqueous alumina suspensions
pp. 913-919(7)
Authors: Tomasik P.; Schilling C.H.; Jankowiak R.; Kim J.-C.

Solid freeform fabrication of alumina ceramic parts through a lost mould method
pp. 921-925(5)
Authors: Cai K.; Guo D.; Huang Y.; Yang J.

Oxidation resistance of Ni-toughened Al₂O₃
pp. 927-934(8)
Authors: Wang T.C.; Chen R.Z.; Tuan W.H.

Co-extrusion of Al₂O₃/ZrO₂ bi-phase high temperature ceramics with fine scale aligned microstructures
pp. 935-942(8)
Authors: Kaya C.; Butler E.G.; Lewis M.H.

R-curve evaluation and bridging stress determination in alumina by compliance analysis
pp. 943-949(7)
Authors: Ebrahimi M.E.; Chevalier J.; Fantozzi G.

Effect of grain boundary microcracking on the light transmittance of sintered transparent MgAl₂O₄
pp. 951-959(9)
Authors: Dericioglu A.F.; Kagawa Y.

Low pressure plasma-sprayed Al₂O₃ and Al₂O₃/SiC nanocomposite coatings from different feedstock powders
pp. 961-976(16)
Authors: Jiansirisomboon S.; MacKenzie K.J.D.; Roberts S.G.; Grant P.S.

Effect of crack-healing and proof-testing procedures on fatigue strength and reliability of Si₃N₄/SiC composites
pp. 977-984(8)
Authors: Ando K.; Chu M.C.; Matsushita S.; Sato S.

Effects of liquid medium and ball-milling on the surface group and aqueous dispersibility of Si₃N₄ powder
pp. 985-990(6)
Authors: Huang Y.; Dai J.-Q.; Xie Z.-P.; Ma T.; Yang J.-L.; Ma J.-T.

Material transport in (Ti_0.3W_0.5Cr_0.2)B₂ ceramics - simultaneous diffusion of ion implanted ⁴⁹Ti and ⁵⁴Cr
pp. 991-995(5)
Authors: Schmidt H.; Borchardt G.; Schmalzried C.; Telle R.; Baumann H.; Weber S.; Scherrer H.