Journal of the European Ceramic Society

Editorial Board
pp. CO2-CO2(1)

Extrusion freeforming of ceramics through fine nozzles
pp. 629-635(7)
Authors: Grida I.; Evans J.R.G.

Stress relaxation in the extrusion of pastes
pp. 637-646(10)
Authors: Chou S.; Sydow K.; Martin P.J.; Bridgwater J.; Wilson D.I.

Uniaxial plastic deformation in the zirconia-based nanocrystalline ceramics containing a silicate glass
pp. 647-657(11)
Authors: Chaim R.; Ramamoorthy R.; Goldstein A.; Eldror I.; Gurman A.

A critical role of pH in the colloidal synthesis and phase transformation of nano size -Al₂O₃ with high surface area
pp. 659-666(8)
Authors: Sharma P.K.; Varadan V.V.; Varadan V.K.V.

Detection of tetragonal zirconia in alumina-zirconia powders by thermoluminescence
pp. 667-673(7)
Authors: Salle C.; Grosseau P.; Guilhot B.; Iacconi P.; Benabdesselam M.; Fantozzi G.

Viscous flow sintering of bioactive glass-ceramic composites toughened by zirconia particles
pp. 675-683(9)
Authors: Verne E.; Defilippi R.; Carl G.; Vitale Brovarone C.; Appendino P.

Thermodynamic calculation of M_s in ZrO₂-CeO₂-Y₂O₃ system
pp. 685-690(6)
Authors: Zhang Y.L.; Jin X.J.; HsuXu Zuyao T.Y.

Effect of brookite phase on the anatase-rutile transition in titania nanoparticles
pp. 691-696(6)
Authors: Hu Y.; Tsai H.-L.; Huang C.-L.

Crystallization of -Na₂Si₂O₅-rich layered silicates from sodium silicate solutions: seeding and temperature programmed -phase embryo creation
pp. 697-705(9)
Author: Falamaki C.

Microstructural and morphological analysis of pure and Ce-doped tin dioxide nanoparticles
pp. 707-713(7)
Authors: Maciel A.P.; Lisboa-Filho P.N.; Leite E.R.; Paiva-Santos C.O.; Schreiner W.H.; Maniette Y.; Longo E.

Low-temperature sintering and high frequency properties of Cu-modified Co₂Z hexaferrite
pp. 715-720(6)
Authors: Wang X.; Li L.; Su S.; Gui Z.; Yue Z.; Zhou J.

Electrical properties of Sb and Cr-doped PbZrO₃-PbTiO₃-PbMg_1/3Nb_2/3O₃ ceramics
pp. 721-728(8)
Authors: Whatmore R.W.; Molter O.; Shaw C.P.

Synthesis, sintering and electrical properties of YNi_0.33Mn_0.67O₃ perovskite prepared by a polymerized method
pp. 729-736(8)
Authors: Moure C.; Gutierrez D.; Tartaj J.; Duran P.

New spinel-containing refractory cements
pp. 737-744(8)
Authors: De Aza A.H.; Pena P.; Rodriguez M.A.; Torrecillas R.; De Aza S.

Effect of moisture and porosity on the thermal properties of a conventional refractory concrete
pp. 745-755(11)
Author: dos Santos W.N.

Characterization investigations of glass-ceramics developed from Seyitomer thermal power plant fly ash
pp. 757-763(7)
Authors: Erol M.; Demirler U.; Kucukbayrak S.; Ersoy-Mericboyu A.; Ovecoglu M.L.

Processing of mullite-molybdenum graded hollow cylinders by centrifugal molding technique
pp. 765-772(8)
Authors: Sivakumar R.; Nishikawa T.; Honda S.; Awaji H.; Gnanam F.D.

Mechanical properties and microstructure for 3 mol% yttria doped zirconia/silicon carbide nanocomposites
pp. 773-780(8)
Authors: Bamba N.; Choa Y.-H.; Sekino T.; Niihara K.

Electrical properties of amorphous SiC_xN_yH_z-ceramics derived from polyvinylsilazane
pp. 781-789(9)
Authors: Trassl S.; Puchinger M.; Rossler E.; Ziegler G.

Microwave reaction bonding of silicon nitride using an inverse temperature gradient and ZrO₂ and Al₂O₃ sintering additives
pp. 791-799(9)
Authors: Fisher J.G.; Woo S.K.; Bai K.; Han I.S.; Lee K.S.; Hong K.S.; Seo D.W.

Ambient and elevated temperature mechanical properties of hot-pressed fused silica matrix composite
pp. 801-808(8)
Authors: Jia D.C.; Zhou Y.; Lei T.C.

High-temperature mechanical properties of sinter-forged silicon nitride with ytterbia additive
pp. 809-815(7)
Authors: Kondo N.; Suzuki Y.; Miyajima T.; Ohji T.