Journal of the European Ceramic Society

Editorial Board
pp. CO2-CO2(1)

Acoustic emission characterisation of calcium aluminate cement hydration at an early stage
pp. 387-398(12)
Authors: Chotard T.J.; Smith A.; Rotureau D.; Fargeot D.; Gault C.

Investigation of fibre modified ceramic moulds for investment casting
pp. 399-407(9)
Authors: Yuan C.; Jones S.

Universal hardness and elastic recovery in Vickers nanoindentation of copper phosphate and silicate glasses
pp. 409-416(8)
Authors: Miura T.; Benino Y.; Sato R.; Komatsu T.

Sol-gel processing of spirosilicates
pp. 417-427(11)
Authors: Thitinun S.; Thanabodeekij N.; Jamieson A.M.; Wongkasemjit S.

Influence of crystallinity on chromatic parameters of enamels coloured with malayaite pink pigments
pp. 429-435(7)
Authors: Harisanov V.; Pavlov R.S.; Marinova I.T.; Kozhukharov V.; Carda J.B.

Morphology and microstructure in the sintering of -spodumene precursor powders with TiO₂ additive
pp. 437-443(7)
Authors: Wang M.-C.; Wu N.-C.; Yang S.; Wen S.-B.

Development of a gastight sealing material for ceramic components
pp. 445-454(10)
Authors: Menzler N.H.; Bram M.; Buchkremer H.P.; Stover D.

Thermal shock resistance and thermal-mechanical processing of sapphire
pp. 455-468(14)
Authors: Lanin A.G.; Muravin E.L.; Popov V.P.; Turchin V.N.

Fractal analysis of cracks in alumina-zirconia composites
pp. 469-479(11)
Authors: Celli A.; Tucci A.; Esposito L.; Palmonari C.

Transformation-induced damping behaviour of Y-TZP zirconia ceramics
pp. 481-489(9)
Authors: Roebben G.; Basu B.; Vleugels J.; Van der Biest O.

Microstructural characterization of plasma-sprayed nanostructured zirconia powders and coatings
pp. 491-497(7)
Authors: Chen H.; Zeng Y.; Ding C.

Liquid-phase redistribution during sintering of 8 mol% yttria-stabilized zirconia
pp. 499-503(5)
Authors: Jung Y.-S.; Lee J.-H.; Lee J.H.; Kim D.-Y.

Synthesis of BaTiO₃ by applying the sample controlled reaction temperature (SCRT) method to the thermal decomposition of barium titanyl oxalate
pp. 505-513(9)
Authors: Gotor F.J.; Perez-Maqueda L.A.; Criado J.M.

Dielectric and pyroelectric properties of barium strontium calcium titanate ceramics
pp. 515-518(4)
Authors: Kang D.-S.; Han M.-S.; Lee S.-G.; Song S.-H.

Room temperature electrochemical growth of polycrystalline BaMoO₄ films
pp. 519-525(7)
Authors: Xia C.-T.; Fuenzalida V.M.

Solid-state formation of lithium ferrites from mechanicallyactivated Li₂CO₃-Fe₂O₃ mixtures
pp. 527-536(10)
Authors: Berbenni V.; Marini A.; Matteazzi P.; Ricceri R.; Welham N.J.

Hot-pressed silicon nitride ceramics with Lu₂O₃ additives: elastic moduli and fracture toughness
pp. 537-545(9)
Authors: Guo S.; Hirosaki N.; Yamamoto Y.; Nishimura T.; Mitomo M.

Joining mechanism in Si₃N₄ bonded with a Ni-Cr-B interlayer
pp. 547-553(7)
Authors: Liang Y.N.; Osendi M.I.; Miranzo P.

Two cores in one grain in the microstructure of silicon nitride prepared with aligned whisker seeds
pp. 555-560(6)
Authors: Park D.-S.; Roh T.-W.; Hockey B.J.; Takigawa Y.; Han B.-D.; Kim H.-D.; Yasutomi Y.

B₄C-CrB₂ composites with improved mechanical properties
pp. 561-565(5)
Authors: Yamada S.; Hirao K.; Yamauchi Y.; Kanzaki S.

Combustion synthesis of ternary carbide Ti₃AlC₂ in Ti-Al-C system
pp. 567-574(8)
Authors: Ge Z.; Chen K.; Guo J.; Zhou H.; Ferreira J.M.F.