Journal of the European Ceramic Society

Biomorphic Cellular Silicon Carbide Ceramics from Wood: I. Processing and Microstructure
pp. 1961-1973(13)
Authors: Greil P.; Lifka T.; Kaindl A.

Biomorphic Cellular Silicon Carbide Ceramics from Wood: II. Mechanical Properties
pp. 1975-1983(9)
Authors: Greil P.; Lifka T.; Kaindl A.

Si₃N₄/SiCN Nanocomposites: tensile ductility and rupture behaviour
pp. 1985-1994(10)
Authors: Mayne M.; Rouxel T.; Bahloul-Hourlier D.; Besson J.-L.

Carbon nanotubes-Fe-alumina nanocomposites. Part I: influence of the Fe content on the synthesis of powders
pp. 1995-2004(10)
Authors: Peigney A.; Laurent C.; Dumortier O.; Rousset A.

Carbon nanotubes-Fe-Alumina nanocomposites. Part II: microstructure and mechanical properties of the hot-Pressed composites
pp. 2005-2013(9)
Authors: Laurent C.; Peigney A.; Dumortier O.; Rousset A.

Effect of Sedimentation and Flocculation Pre-treatment of Starting Si₃N₄ and Al₂O₃ Powders on Room Temperature Strength of -sialon (z=1)
pp. 2015-2018(4)
Authors: Kishi K.; Umebayashi S.; Tani E.; Shobu K.; Pompe R.; Kristffersson A.

Processing of an in-situ Layered and Graded Alumina/Calcium-Hexaluminate composite: Physical Characteristics
pp. 2019-2024(6)
Authors: Asmi D.; Low I.M.

Mechanical characterization of Al₂O₃/ZrO₂ hybrid laminates
pp. 2025-2034(10)
Authors: Cai P.Z.; Green D.J.; Messing G.L.

Boundary stress and its effect on toughness in thin boundary layered and particulate composites: model analysis and experimental test on Y-TZP-based ceramic composites
pp. 2035-2043(9)
Authors: Shi J.L.; Li L.; Guo J.K.

Enstatite Based Ceramics for Machinable Prosthesis Applications
pp. 2045-2056(12)
Authors: Goeuriot D.; Dubois J.C.; Merle D.; Thevenot F.; Exbrayat P.

Influence of environment on delayed failure of alumina ceramics
pp. 2057-2063(7)
Authors: Barinov S.M.; Ivanov N.V.; Orlov S.V.; Shevchenko V.J.

Thermal cycling of indented ceramic materials
pp. 2065-2071(7)
Authors: Andersson T.; Rowcliffe D.J.

Thermal fatigue resistance of open cell ceramic foams
pp. 2073-2080(8)
Authors: Vedula V.R.; Green D.J.; Hellmann J.R.

Synthesis and mechanical properties of mullite from beach sand sillimanite: effect of TiO₂
pp. 2081-2087(7)
Authors: Tripathi H.S.; Banerjee G.

Cold isostatic pressing of cement pastes to produce pore reduced cement (PRC)
pp. 2089-2093(5)
Authors: Pedersen J.; Macphee D.E.; Chandler H.W.

Fabrication process of spinel powder for plasma spraying
pp. 2095-2100(6)
Authors: Lallemand G.; Fayeulle S.; Treheux D.

Superplastic deep drawing of tetragonal zirconia ceramics at 1160^oC
pp. 2101-2106(6)
Authors: Winnubst A.J.A.; Boutz M.M.R.

Processing character of MgO-partially stabilized zirconia (PSZ) in size grading prepared by injection molding
pp. 2107-2116(10)
Authors: Wei W.-C.J.; Lin Y.-P.

Binder Distribution in Spray-Dried Alumina Agglomerates
pp. 2117-2121(5)
Authors: Baklouti S.; Chartier T.; Baumard J.F.

Comparison of different binders for water-based tape casting of alumina
pp. 2123-2131(9)
Authors: Kristoffersson A.; Roncari E.; Galassi C.

Study of interactions between polyelectrolyte dispersants, alumina and latex binders by rheological characterisation
pp. 2133-2140(8)
Authors: Kristoffersson A.; Lapasin R.; Galassi C.

Optimising the dispersion on an alumina suspension using commercial polyvalent electrolyte dispersants
pp. 2141-2147(7)
Authors: Briscoe B.J.; Khan A.U.; Luckham P.F.

slip casting of cordierite and cordierite- mullite materials
pp. 2149-2157(9)
Authors: Camerucci M.A.; Cavalieri A.L.; Moreno R.

From Long-Range Interaction to Solid-Body Contact Between Colloidal Surfaces During Forming
pp. 2159-2167(9)
Author: Hong C.-W.

Stabilising zirconia aqueous suspensions using commercial polyvalent electrolyte solutions
pp. 2169-2173(5)
Authors: Briscoe B.J.; Khan A.U.; Luckham P.F.

Preparation and characterization of colloidal solution derived crystallized titania powder
pp. 2175-2181(7)
Authors: Cot F.; Larbot A.; Nabias G.; Cot L.

Interaction of barium titanate powders with an aqueous suspending medium
pp. 2183-2192(10)
Authors: Lopez M.C.B.; Fourlaris G.; Riley F.L.

In-situ fabrication of ceramic/Metal nanocomposites by reduction reaction in barium titanate-Metal oxide systems
pp. 2193-2199(7)
Authors: Hwang H.J.; Toriyama M.; Sekino T.; Niihara K.

Relaxor properties of (Pb_0.75Ba_0.25)(Zr_0.70Ti_0.30)O₃ ceramics
pp. 2201-2207(7)
Authors: Ujma Z.; Adamczyk M.; Handerek J.

The Perovskite Oxide System Pr_1-xSr_xCo_1-yMn_yO_3-: Crystal Structure and Thermal Expansion
pp. 2209-2215(7)
Authors: Kostogloudis G.C.; Fertis P.; Ftikos C.

Semiconductor Properties of Thin and Thick Film Ga₂O₃ Ceramic Layers
pp. 2217-2226(10)
Authors: Feltz A.; Gamsjager E.

Sorption and gas sensitive properties of In₂O₃ based ceramics doped with Ga₂O₃
pp. 2227-2232(6)
Authors: Ratko A.; Babushkin O.; Baran A.; Baran S.

Characterization of SnO₂-varistors with different additives
pp. 2233-2239(7)
Authors: Castro M.S.; Aldao C.M.

Solid-State Synthesis, X-ray Powder Investigation and IR Study of -Mg₃[BPO₇]
pp. 2241-2246(6)
Authors: Gozel G.; Baykal A.; Kizilyalli M.; Kniep R.

Microstructure effects in the X-ray powder diffraction profile of 9mol% Mg-PSZ
pp. 2247-2252(6)
Authors: Cumbrera F.L.; Sanchez-Bajo F.; Fernandez R.; Llanes L.