Journal of the European Ceramic Society

The hydrothermal synthesis of BaTiO₃ fine particles from hydroxide-Alkoxide precursors
pp. 279-286(8)
Authors: Urek S.; Drofenik M.

Ultrafine titania by flame spray pyrolysis of a titanatrane complex
pp. 287-297(11)
Authors: Bickmore C.R.; Waldner K.F.; Baranwal R.; Hinklin T.; Treadwell D.R.; Laine R.M.

Twinning in Alumina Investigated with High Resolution Transmission Electron Microscopy
pp. 299-304(6)
Authors: Wang Y.G.; Bronsveld P.M.; De Hosson J.T.M.; Djuric&unknown;ic B.; McGarry D.; Pickering S.

An FT-IR Study of the Chlorination of -Alumina Surfaces
pp. 305-309(5)
Authors: Vigue H.; Quintard P.; Merle-Mejean T.; Lorenzelli V.

Processing of aqueous tape-casting of alumina with acrylic emulsion binders
pp. 311-321(11)
Authors: Doreau F.; Tar G.; Pagnoux C.; Chartier T.; Ferreira J.M.F.

The effect of binders on the strength and Young's modulus of dry pressed alumina
pp. 323-328(6)
Authors: Baklouti S.; Chartier T.; Gault C.; Baumard J.F.

Strength predictions for notched alumina specimens
pp. 329-338(10)
Authors: Hertel D.; Fett T.; Munz D.

Residual carbon evolution in BaTiO₃ ceramics studied by XPS after ion etching
pp. 339-343(5)
Authors: Miot C.; Husson E.; Proust C.; Erre R.; Coutures J.P.

Densification and coarsening of SnO₂-based materials containing manganese oxide
pp. 345-351(7)
Authors: Gouvea D.; Smith A.; Bonnet J.P.; Varela J.A.

Elastic modulus versus bond length in lanthanum chromite ceramics
pp. 353-358(6)
Author: Montross C.S.

Glass transition temperature and crystallisation of glasses in the Li₂O.4GeO₂-K₂O.4GeO₂ composition range
pp. 359-362(4)
Authors: Laudisio G.; Catauro M.

Sintering and plasma spray deposition of bioactive glass-Matrix composites for medical applications
pp. 363-372(10)
Authors: Verne E.; Ferraris M.; Ventrella A.; Paracchini L.; Krajewski A.; Ravaglioli A.

Manufacture and properties of Al₂O₃-TiN particulate composites
pp. 373-380(8)
Authors: Rak Z.S.; Czechowski J.

Mechanical properties of toughened Al₂O₃-ZrO₂-TiN ceramics
pp. 381-388(8)
Authors: Ostrovoy D.; Orlovskaya N.; Kovylyaev V.; Firstov S.

Microstructure and Hardness of cBN-Zr Composite
pp. 389-393(5)
Authors: Benko E.; Morgiel J.; Czeppe T.; Barr T.

Properties of Ni₃Al-bonded Titanium Carbide Ceramics
pp. 395-400(6)
Authors: Becher P.F.; Plucknett K.P.

Comparative study of fabrication of Si₃N₄/SiC composites by spark plasma sintering and hot isostatic pressing
pp. 401-404(4)
Authors: Perera D.S.; Tokita M.; Moricca S.

Colloidal filtration of silicon nitride aqueous slips. Part I: optimization of the slip parameters
pp. 405-416(12)
Authors: Moreno R.; Salomoni A.; Mello Castanho S.

Thermal Stability of Calcium -sialon Ceramics
pp. 417-427(11)
Authors: Hewett C.L.; Cheng Y.-B.; Muddle B.C.; Trigg M.B.