Journal of Materials Processing Technology

A study on the prediction of fatigue life in an axi-symmetric extrusion die
pp. 343-349(7)
Authors: Ahn S.H.; Kim T.H.; Kim B.M.; Choi J.C.

Mechanism of material removal in electrochemical discharge machining: a theoretical model and experimental verification
pp. 350-359(10)
Authors: Basak I.; Ghosh A.

Development of a combined-type tool dynamometer with a piezo-film accelerometer for an ultra-precision lathe
pp. 360-366(7)
Authors: Kim J.-D.; Kim D.-S.

Built-up edge analysis of orthogonal cutting by the visco-plastic finite-element method
pp. 367-372(6)
Authors: Kim J.-D.; Marinov V.R.; Kim D.-S.

A combined electrical machining process for the production of a flexure hinge
pp. 373-376(4)
Authors: Li X.; Jia Z.; Zhao J.; Liu J.

Processing map for the hot working of near- titanium alloy 685
pp. 377-383(7)
Authors: Krishna V.G.; Prasad Y.V.R.K.; Birla N.C.; Rao G.S.

Development of a magnetic abrasive jet machining system for precision internal polishing of circular tubes
pp. 384-393(10)
Authors: Kim J.-D.; Kang Y.-H.; Bae Y.-H.; Lee S.-W.

Investigations into the high-speed forging of sintered copper powder strips
pp. 394-401(8)
Authors: Jha A.K.; Kumar S.

Numerical simulation of flow and temperature evolution during the initial phase of steady-state solidification
pp. 402-413(12)
Author: Li B.Q.

A new model for calculating the maximum blow force of a die-forging hammer
pp. 414-417(4)
Authors: Yunri L.; Keyi Y.; Zhenlin N.

Forming limits for sheet metals under tensile stresses
pp. 418-421(4)
Author: Wang Z.

On the working accuracy of laser bending
pp. 422-432(11)
Authors: Hennige T.; Holzer S.; Vollertsen F.; Geiger M.

The effects of machining settings on the behavior of pulse trains in the WEDM process
pp. 433-439(7)
Authors: Liao Y.S.; Woo J.C.

On the design of a rotary spray former: experimental and theoretical background
pp. 440-455(16)
Author: Jarfors A.E.W.

Prediction of tool life in end milling by response surface methodology
pp. 456-465(10)
Authors: Alauddin M.; El Baradie M.A.; Hashmi M.S.J.

Effects of density change and natural convection on the solidification process of a pure metal
pp. 466-476(11)
Author: Hwang K.-Y.

An upper bound analysis of the square-die extrusion of non-axisymmetric sections
pp. 477-486(10)
Authors: Kim D.K.; Cho J.R.; Bae W.B.; Kim Y.H.; Bramley A.N.

A study on the machining-parameters optimization of wire electrical discharge machining
pp. 487-493(7)
Authors: Liao Y.S.; Huang J.T.; Su H.C.