Journal of Materials Processing Technology

Some current development trends in metal-forming technology
pp. 1-9(9)
Author: Kopp R.

Mechanical, thermal and physical coupling methods in FE analysis of metal forming processes
pp. 11-18(8)
Authors: Chenot J.-L.; Chastel Y.

Sheet metal forming simulation in industry
pp. 19-26(8)
Author: Makinouchi A.

Microstructure modelling for property prediction and control
pp. 27-33(7)
Author: Hodgson P.D.

Finite deformation plasticity with strain induced anisotropy and shear banding
pp. 35-44(10)
Author: Pecherski R.B.

A review of the numerical analysis of superplastic forming
pp. 45-53(9)
Authors: Wood R.D.; Bonet J.

Numerical and experimental simulation of pass rolling
pp. 55-60(6)
Authors: Macura P.; Petruska J.

Deformation during rolling in modified elongating grooves
pp. 61-65(5)
Author: Labuda E.

Manufacturing systems for the production of seamless-rolled rings
pp. 67-72(6)
Authors: Szabo Z.J.; Dittrich E.

Asymmetry of the roll gap as a factor improving work of the hydraulic gauge control in the plate rolling mill
pp. 73-80(8)
Authors: Dyja H.; Markowski J.; Stoinski D.

The influence of some rolling parameters on the residual stresses after rolling
pp. 81-86(6)
Authors: Razny W.; Fischer F.D.; Finstermann G.; Schwenzfeier W.; Zeman K.

The modelling of the mechanics of deformation in flat rolling
pp. 87-94(8)
Authors: W. Y.D.Y.; Dixon A.; D. N.N.

A study of pore closure and welding in hot rolling process
pp. 95-102(8)
Authors: A. W.; Thomson P.F.; Hodgson P.D.

Finite element investigation of curvature in the roll platen forming process
pp. 103-108(6)
Authors: Q. X.; Hartley P.; Pillinger I.

A steady state thermo-elastoviscoplastic finite element model of rolling with coupled thermo-elastic roll deformation
pp. 109-116(8)
Authors: Hacquin A.; Montmitonnet P.; Guillerault J.-P.

Material physical response in the extrusion process
pp. 117-124(8)
Author: Misiolek W.Z.

Application of a decision making method in the forging condition optimisation for manufacturing automotive components
pp. 125-132(8)
Authors: Forcellese A.; Gabrielli F.; Ruffini R.

Safety maps in bimetallic extrusions
pp. 133-140(8)
Authors: Alcaraz J.L.; Gil-Sevillano J.

Control of material flow in a combined backward can - forward rod extrusion
pp. 141-147(7)
Authors: Kuzman K.; Pfeifer E.; Bay N.; Hunding J.

Local flange buckling and its relation to elastic springback in forming of aluminium extrusions
pp. 149-154(6)
Authors: Welo T.; Paulsen F.

Some problems of multi-stage fine wire drawing of high-alloy steels and special alloys
pp. 155-160(6)
Authors: Skolyszewski A.; Luksza J.; Packo M.

State of strain in the tube sinking process
pp. 161-166(6)
Authors: Sadok L.; Kusiak J.; Packo M.; Ruminski M.

Drawing of square twisted wire
pp. 167-170(4)
Author: Knap F.

The effects of die angle on texture and annealing response of ETP copper wire
pp. 171-178(8)
Authors: Kraft F.F.; Chakkingal U.; Baker G.; Wright R.N.

Influence of die semi-angle on mechanical properties of single and multiple pass drawn copper
pp. 179-182(4)
Authors: de Castro A.L.R.; Campos H.B.; Cetlin P.R.

Square cup deep drawing and 2D-draw bending analysis of Hadfield steel
pp. 183-190(8)
Authors: Bayraktar E.; Altintas S.

Virtual manufacturing for sheet metal processing (Development of scheduling simulator for small scale job shop)
pp. 191-196(6)
Authors: Endo J.; Ohba S.; Anzai T.

Analytical and experimental analysis of deep drawing process for bimetal elements
pp. 197-200(4)
Author: Kapinski S.

Analysis of punch-stretching in vibratory regime
pp. 201-204(4)
Author: Banabic D.

Circle grid analysis applied to the production problems of the car body panel
pp. 205-208(4)
Author: Buchar Z.

Computer aided design of roll-forming of channel sections
pp. 209-214(6)
Authors: Brunet M.; Lay B.; Pol P.

Numerical simulation of roll-forming by B-spline finite strip method
pp. 215-218(4)
Authors: C. L.; Y. Z.; W. L.

Longitudinal and shear strain development in cold roll forming
pp. 219-224(6)
Authors: Panton S.M.; Duncan J.L.; S. D.Z.

Computer aided engineering of the sheet bending process
pp. 225-232(8)
Authors: Forcellese A.; Fratini L.; Gabrielli F.; Micari F.

Change in shape of a cold formed and annealed stainless steel sheet and joining with use of this change
pp. 233-238(6)
Author: Kasuga Y.

Plastic anisotropy in FEM analysis using degenerated solid element
pp. 239-242(4)
Authors: Makinouchi A.; Kawka M.

Industrial applications of sheet stamping simulation using new finite element models
pp. 243-247(5)
Authors: Rojek J.; Jovicevic J.; Onate E.

Development of real-time process control system for precision and flexible V-bending with an on-line database
pp. 249-254(6)
Authors: M. Y.; Manabe K.-I.; Nishimura H.

Simulation of sheet cutting by the large time increment method
pp. 255-260(6)
Authors: Abdali A.; Benkrid K.; Bussy P.

Micromechanics of spall and damage in tantalum
pp. 261-267(7)
Authors: Zurek A.K.; Thissell W.R.; Johnson J.N.; Tonks D.L.; Hixson R.

The determination of the cold forgeability for specimens with axial notches of heat resisting and corrosion resisting chromium nickel steels
pp. 269-274(6)
Authors: Janicek L.; Maros B.

The effect of the roll-gap shape factor on internal defects in rolling
pp. 275-282(8)
Author: Turczyn S.

Comparison of formability of steel strips, which are used for deep drawing of stampings
pp. 283-290(8)
Author: Cada R.

Prediction of forming limit in deep drawing of Fe/Al laminated composite sheets using ductile fracture criterion
pp. 291-296(6)
Authors: Takuda H.; Mori K.; Fujimoto H.; Hatta N.

An orthotropic ductile damage model for visco-plastic materials
pp. 297-304(8)
Authors: Staub C.; Boyer J.C.

Microstructural model of intergranular fracture during tensile tests
pp. 305-310(6)
Authors: J. L.; Szpunar J.A.

Material characterization for the prediction of ductile fracture occurrence: an inverse approach
pp. 311-316(6)
Authors: Fratini L.; Lombardo A.; Micari F.

The influence of hot deformation on the microstructure of Ni-Al and Ni-Al-Fe alloys with small Ti₂B addition.
pp. 317-323(7)
Authors: Czeppe T.; Szczepanik S.

Post-processing of finite element results and prediction of the localized necking in sheet metal forming
pp. 325-330(6)
Authors: Gelin J.C.; Boudeau N.

Measurements of friction during hot rolling of aluminum strips
pp. 331-338(8)
Authors: Hum B.; Colquhoun H.W.; Lenard J.G.

Some observations on contact stress measurement by pin load cell in bulk metal forming
pp. 339-342(4)
Authors: Bramley A.N.; Plancak M.; Osman F.H.

Contact pressure distribution in upsetting of compound metals
pp. 343-348(6)
Authors: Kocanda A.; Presz W.; Adamczyk G.; Czyzewski P.; Mazurek W.

Friction modelling and experimental observations in hot ring compression tests
pp. 349-353(5)
Authors: Rudkins N.T.; Hartley P.; Pillinger I.; Petty D.

Development of deterministic-stochastic surface structures to improve the tribological conditions of sheet forming processes
pp. 355-361(7)
Authors: Steinhoff K.; Rasp W.; Pawelski O.

Properties of metal sheets with 3-D designed surface microgeometry prepared by special rolls
pp. 363-368(6)
Author: Ike H.

Development of a FEM-model for the simulation of the transfer of surface structure in cold-rolling processes
pp. 369-376(8)
Authors: Bunten R.; Steinhoff K.; Rasp W.; Kopp R.; Pawelski O.

Analysis of herring-bone mechanism in sheet rolling
pp. 377-380(4)
Author: Komori K.

Prediction of rolling force in cold rolling by using physical models and neural computing
pp. 381-386(6)
Authors: Larkiola J.; Myllykoski P.; Nylander J.; Korhonen A.S.

Neural network for identification of roll eccentricity in rolling mills
pp. 387-392(6)
Authors: Aistleitner K.; Haas W.; Mattersdorfer L.G.; Kugi A.

The improved control for an aluminium hot reversing mill using the combination of adaptive process models and an expert system
pp. 393-398(6)
Authors: Postlethwaite I.; Atack P.A.; Robinson I.S.

Development of prediction model for mechanical properties of batch annealed thin steel strip by using artificial neural network modelling
pp. 399-404(6)
Authors: Myllykoski P.; Larkiola J.; Nylander J.

Application of synergetic artificial intelligence to the scheduling in the finishing train of hot strip mills
pp. 405-408(4)
Authors: S. X.; H. N.; S. H.; W. W.; S. Z.; W. G.

Parallel finite element calculation of plastic deformations on Exemplar SPP1000 and on networked workstations
pp. 409-413(5)
Authors: Bubak M.; Chrobak R.; Kitowski J.; Moscinski J.; Pietrzyk M.

An examination of long-rod penetration in micro-scale using particles
pp. 415-420(6)
Authors: Dzwinel W.; Alda W.; Kitowski J.; Moscinski J.; D. A.Y.

Application of process modelling - an industrial view
pp. 421-426(6)
Author: Petty D.M.

A three-dimensional study of flow in the fullering process using an elastic-plastic finite-element simulation
pp. 427-433(7)
Authors: Fereshteh-Saniee E.; Pillinger I.; Hartley P.; Hall F.R.

Variational methods in the mechanics of metal forming by pressure
pp. 435-439(5)
Author: Tarnovskij V.I.

Modelling of the thermomechanical coupling during hot forming of viscoplastic materials
pp. 441-446(6)
Authors: Gelin J.C.; Nguegang B.V.

An inverse analysis using a finite element model for identification of rheological parameters
pp. 447-454(8)
Authors: Gavrus A.; Massoni E.; Chenot J.L.

Inverse analysis applied to the evaluation of material parameters in the history dependent flow stress equation in hot forming of metals
pp. 455-461(7)
Authors: Kusiak J.; Kawalla R.; Pietrzyk M.; Pircher H.

Determination of hammering sequence in incremental sheet metal forming using a genetic algorithm
pp. 463-468(6)
Authors: Mori K.; Yamamoto M.; Osakada K.

A study on the influence of friction evolution on thickness changes in sheet metal forming
pp. 469-474(6)
Authors: Sosnowski W.; Kleiber M.

Application of a F.E.M. code to the evaluation of the friction law of a tungsten part at high temperatures
pp. 475-479(5)
Authors: Thiebaut C.; Morey J.-M.

On modelling of the contact conditions in compound die using the hermitian finite elements
pp. 481-484(4)
Authors: Forejt M.; Vrbka J.

Sensitivity analysis of metal forming processes involving frictional contact in steady state
pp. 485-491(7)
Authors: Antunez H.J.; Kleiber M.

Application of the R-functions method to visioplastic analysis in metal forming
pp. 493-500(8)
Authors: Pokras V.D.; Rvachev M.A.

Finite element three-dimensional modelling of the solidification of a metal forming charge
pp. 501-504(4)
Author: Glowacki M.

A fully 3D finite element simulation of cold pilgering
pp. 505-512(8)
Authors: Mulot S.; Hacquin A.; Montmitonnet P.; Aubin J.-L.

Thermal-mechanical model of the tube elongation process in Diescher's mill
pp. 513-516(4)
Authors: Malinowski Z.; Kazanecki J.; Urbanski S.

Spatial modelling of swaging process using finite element method applied to axially-symmetrical problems
pp. 517-522(6)
Authors: Piela A.; Grosman F.

Simplified numerical simulation of forming a car wheel disk using the SIMEX explicit FEM code, and comparisons with press-shop results
pp. 523-528(6)
Authors: Ferran G.; Barros C.R.M.; di Pasquale E.; Yamashita E.

On optimal position control of mechanisms in rolling processes
pp. 529-534(6)
Authors: Hejmo W.; Koziol R.

Adaptation of hot mill process models
pp. 535-542(8)
Authors: Atack P.A.; Robinson I.S.

Development of optimum process design system by numerical simulation
pp. 543-548(6)
Authors: Ohata T.; Nakamura Y.; Katayama T.; Nakamachi E.; Nakano K.

Analysis of plane-strain rotational compression of rod by FEM
pp. 549-554(6)
Author: Pater Z.

Cold forming processes: some examples of predictions and design optimization using numerical simulations
pp. 555-562(8)
Authors: Brethenoux G.; Bourgain E.; Pierson G.; Jallon M.; Secordel P.

Microstructure development during the deformation of aluminium-magnesium alloys
pp. 563-566(4)
Authors: Parker B.A.; JangHo L.

Experimental and mathematical simulation of microstructural evolution during hot rolling of Al and Cu material
pp. 567-574(8)
Authors: Lehnert W.; Cuong N.D.

Hot deformation behaviour and grain refinement of intermetallic compound Ni₃Al
pp. 575-580(6)
Authors: Schindler I.; Machacek J.; Kliber J.; Greger M.; Kursa M.

Use of the computer simulation to predict mechanical properties of C-Mn steel, after thermomechanical processing
pp. 581-588(8)
Authors: Majta J.; Kuziak R.; Pietrzyk M.; Krzton H.

Modelling of plastic flow, heat transfer and microstructural evolution during rolling of eutectoid steel rods
pp. 589-596(8)
Authors: Kuziak R.; Glowacki M.; Pietrzyk M.

Recrystallization/precipitation behaviour in microalloyed steels
pp. 597-602(6)
Authors: Kliber J.; Schindler I.

Validation of thermomechanical and microstructural models for niobium steels in hot rolling-drawing
pp. 603-608(6)
Authors: Kedzierski Z.; Packo M.; Skolyszewski A.; Zielinska-Lipiec A.; Kusiak H.

Physical simulation of hot rolling in the ferrite range of steels
pp. 609-614(6)
Authors: Groszheim H.; Schotten K.; Bleck W.

The effect of through-thickness strain distribution on the static recrystallization of hot rolled austenitic stainless steel strip
pp. 615-619(5)
Authors: X. J.Z.; Hodgson P.D.; Thomson P.F.

Development of constitutive equations of copper-silicon alloys
pp. 621-627(7)
Author: Gronostajski Z.J.

Modelling of welding. A comparison of a thermo-mechano-metallurgical constitutive model with a thermo-viscoplastic material model
pp. 629-636(8)
Authors: Ronda J.; Estrin Y.; Oliver G.J.

The influence of warm plastic deformation on the structure and on the applicable properties of high speed steel
pp. 637-641(5)
Author: Berkowski L.

New experiments for determining yield loci of sheet metal
pp. 643-648(6)
Authors: Muller W.; Pohlandt K.

Intrinsic criterion of plastic instability
pp. 649-656(8)
Authors: Moritoki H.; Okuyama E.

Wire drawing with ultrasonically oscillating dies
pp. 657-660(4)
Authors: Siegert K.; Mock A.

The effect of ultrasound on tube drawing
pp. 661-668(8)
Authors: Petruzelka J.; Sarmanova J.; Sarman A.

Hydroforming - a method to manufacture light-weight parts
pp. 669-676(8)
Authors: Dohmann F.; Hartl C.

Experimental and numerical dynamic modelling of ironing process
pp. 677-684(8)
Authors: Baillet L.; Brunet M.; Berthier Y.

Numerical modelling of the mechanical state of deformable gaskets in diamond anvil cell
pp. 685-690(6)
Authors: Polotnyak S.B.; Idesman A.V.

Determination of optimum working conditions in mushy-state upsetting of magnet using distinct element simulation
pp. 691-696(6)
Authors: Otsu M.; Mori K.; Osakada K.

New aspects of the plastometric tests for middle and high carbon steels in the superplastic conditions
pp. 697-701(5)
Authors: Rusz S.; Lapkowski W.; Sinczak J.; Boruta J.

The formability of the Al-5%SiC composite obtained using P/M method
pp. 703-709(7)
Authors: Szczepanik S.; Lehnert W.

Numerical prediction of the development of particle stress in the forging of aluminium metal matrix composites
pp. 711-718(8)
Authors: Roberts S.M.; Kusiak J.; Withers P.J.; Barnes S.J.; Prangnell P.B.

Production of composites on the base of AlCu4 alloy chips
pp. 719-722(4)
Authors: Gronostajski J.Z.; Marciniak H.; Matuszak A.

Fast upsetting of circular cylinders of aluminium metal matrix composites: Experimental results and numerical analysis
pp. 723-727(5)
Authors: Hamouda A.M.S.; Sulaiman S.; Hashmi M.S.J.

The influence of the hot deformation and heat treatment on the properties of P/M Al-Cu composites
pp. 729-733(5)
Authors: Szczepanik S.; Sleboda T.