Materials Science and Engineering: A

Inside Front Cover:Editorial Board
pp. CO2-CO2(1)

Combined study of crystallization of amorphous Fe_75-xNi_xSi₉B₁₆ alloy
pp. 211-220(10)
Authors: Efthimiadis K.G.; Chrissafis K.; Polychroniadis E.K.

The effect of strain path and temperature on the microstructure developed in copper processed by ECAE
pp. 221-228(8)
Authors: Huang W.H.; Yu C.Y.; Kao P.W.; Chang C.P.

X-ray diffraction line profile analysis of iron ball milled powders
pp. 229-238(10)
Authors: Vives S.; Gaffet E.; Meunier C.

A thermodynamic model for solid solutions and its application to the C-Fe-Co, C-Fe-Ni and Mn-Cr-Pt solid dilutions
pp. 239-247(9)
Author: Tao D.P.

Novel nanostructred Pd-Zr oxides
pp. 248-253(6)
Authors: Zhang H.; Gromek J.; Fernando G.; Marcus H.L.

The effects of a nickel oxide precoat on the gas bubble structures and fish-scaling resistance in vitreous enamels
pp. 254-261(8)
Authors: Yang X.; Jha A.; Brydson R.; Cochrane R.C.

Modeling the mechanical response of an aluminum alloy automotive rim
pp. 262-268(7)
Authors: Stearns J.; Srivatsan T.S.; Prakash A.; Lam P.C.

Modeling void coalescence during ductile fracture of a steel
pp. 269-281(13)
Authors: Bandstra J.P.; Koss D.A.; Geltmacher A.; Matic P.; Everett R.K.

Effect of the number of ECAP pass time on the electrochemical properties of 1050 Al alloys
pp. 282-291(10)
Authors: Chung M.-K.; Choi Y.-S.; Kim J.-G.; Kim Y.-M.; Lee J.-C.

Effect of corrosion product layer on SCC susceptibility of copper containing type 304 stainless steel in 1 M H₂SO₄
pp. 292-298(7)
Authors: Asawa M.; Devasenapathi A.; Fujisawa M.

Damage accumulation and failure of HSLA-100 steel
pp. 299-309(11)
Authors: Chae D.; Koss D.A.

Evolution of microstructure during annealing of a severely deformed aluminum
pp. 310-317(8)
Authors: Yu C.Y.; Sun P.L.; Kao P.W.; Chang C.P.

Sintering in different atmospheres of T15 and M2 high speed steels produced by a modified metal injection moulding process
pp. 318-324(7)
Authors: Varez A.; Levenfeld B.; Torralba J.M.; Matula G.; Dobrzanski L.A.

Features of SiAlON synthesis from kaolin
pp. 325-331(7)
Authors: Vlasova M.; Vinokurov V.B.; Grigor'ev O.N.; Panasyuk A.D.; Bega N.D.; Kakazey M.; Gonzalez-Rodriguez J.G.; Dominguez-Patino G.; Dominguez-Patino M.

Oxygen partial pressure effect on synthesis and characteristics of Sb₂O₃ nanoparticles
pp. 332-337(6)
Authors: Zeng D.W.; Zhu B.L.; Xie C.S.; Song W.L.; Wang A.H.

Transformation behaviour of tetragonal zirconia: role of dopant content and distribution
pp. 338-347(10)
Authors: Basu B.; Vleugels J.; Biest O.V.D.

Effect of different cross-section types on mechanical properties of carbon fibers-reinforced cement composites
pp. 348-355(8)
Authors: Park S.-J.; Seo M.-K.; Shim H.-B.; Rhee K.-Y.

Influence of particle shape and aspect ratio on thermally activated viscoplastic (time-dependent) response of ceramic (zirconia)-metal (NiCoCrAlY) particulate composites
pp. 356-366(11)
Authors: Rangaraj S.; Kokini K.

Flexural strength of a composite cylinder incorporated with thermal residual stresses
pp. 367-380(14)
Author: Huang Z.-M.

A new analytical model for three-dimensional elastic stress field distribution in short fibre composite
pp. 381-396(16)
Authors: Jiang Z.; Liu X.; Li G.; Lian J.

Interaction of hydrogen with crack-tip plasticity: effects of constraint on void growth
pp. 397-411(15)
Authors: Liang Y.; Sofronis P.; Dodds R.H.

Stress relaxation behavior of shot-peened Ti-6Al-4V under fretting fatigue at elevated temperature
pp. 412-420(9)
Authors: Lee H.; Mall S.

Formation of nanocrystals in Ti₇₈Fe₁₅Si₇ amorphous alloy with a wide supercooled liquid region
pp. 421-425(5)
Authors: Kim K.B.; Ko B.C.; Pak S.J.

Erratum to ''Low-cycle fatigue behavior of Al-based composites containing in situ TiB₂, Al₂O₃ and Al₃Ti reinforcements'' [Mater. Sci. Eng. A 358 (1-2) (2003) 99-106]
pp. 426-426(1)
Authors: Tjong S.C.; Wang G.S.; Mai Y.W.

Author Index
pp. 427-428(2)

Subject Index
pp. 429-433(5)